(cc: linux-ide added) On Sun, 24 Jun 2007 20:49:05 +0200, otto Meier wrote: > I got the following in my logs: > > Jun 24 19:06:40 gate2 kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr > 0x0 action 0x0 > Jun 24 19:06:40 gate2 kernel: ata4.00: (port_status 0x00001000) > Jun 24 19:06:40 gate2 kernel: ata4.00: cmd > 35/00:00:c1:17:92/00:04:17:00:00/e0 tag 0 cdb 0x0 data 524288 out > Jun 24 19:06:40 gate2 kernel: res > 50/00:00:c0:1b:92/00:00:17:00:00/e0 Emask 0x20 (host bus error) > Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors = > 488397168, hpa_sectors = 488397168 > Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors = > 488397168, hpa_sectors = 488397168 > Jun 24 19:06:40 gate2 kernel: ata4.00: configured for UDMA/133 > Jun 24 19:06:40 gate2 kernel: ata4: EH complete > Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] 488397168 512-byte > hardware sectors (250059 MB) > Jun 24 19:06:40 gate2 kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr > 0x0 action 0x0 > Jun 24 19:06:40 gate2 kernel: ata4.00: (port_status 0x00001000) > Jun 24 19:06:40 gate2 kernel: ata4.00: cmd > 25/00:00:c1:15:92/00:02:17:00:00/e0 tag 0 cdb 0x0 data 262144 in > Jun 24 19:06:40 gate2 kernel: res > 50/00:00:c0:17:92/00:00:17:00:00/e0 Emask 0x20 (host bus error) > Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors = > 488397168, hpa_sectors = 488397168 > Jun 24 19:06:40 gate2 kernel: ata4.00: ata_hpa_resize 1: sectors = > 488397168, hpa_sectors = 488397168 > Jun 24 19:06:40 gate2 kernel: ata4.00: configured for UDMA/133 > Jun 24 19:06:40 gate2 kernel: ata4: EH complete > Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write Protect is off > Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 > Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write cache: enabled, > read cache: enabled, doesn't support DPO or FUA > Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] 488397168 512-byte > hardware sectors (250059 MB) > Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write Protect is off > Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 > Jun 24 19:06:40 gate2 kernel: sd 3:0:0:0: [sdd] Write cache: enabled, > read cache: enabled, doesn't support DPO or FUA > > The system continued without seeing other effects. > > It is runnuning a 2.6.22-rc5 kernel with hrt1 patch. > The drive ist part of a raid5 with 4 identical drives > > lspci -vvv gives: > > 02:06.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA > 300 TX4) (rev 02) The 300 TX4 model is causing transient errors for several people, and we don't yet know why. In your case, port_status 0x00001000 means that "host bus is busy more than 256 clock cycles for every ATA I/O transfer" (quoting the docs). Basically it's a timeout. As long as it's transient, don't worry. You may want to try without hrt1 to see if hrt1 is causing the issue. /Mikael - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
