* Add ata_dev_has_iordy() helper.
* Use it in sl82c105 host driver so it always gets the correct info
(use_iordy was incorrectly set for "pio" != 255 cases).
* Remove no longer needed ide_pio_data_t.use_iordy field.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ide/ide-lib.c | 5 -----
drivers/ide/pci/sl82c105.c | 10 +++++++---
include/linux/ide.h | 6 +++++-
3 files changed, 12 insertions(+), 9 deletions(-)
Index: b/drivers/ide/ide-lib.c
===================================================================
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -267,18 +267,15 @@ u8 ide_get_best_pio_mode (ide_drive_t *d
{
int pio_mode;
int cycle_time = 0;
- int use_iordy = 0;
struct hd_driveid* id = drive->id;
int overridden = 0;
if (mode_wanted != 255) {
pio_mode = mode_wanted;
- use_iordy = (pio_mode > 2);
} else if (!drive->id) {
pio_mode = 0;
} else if ((pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {
printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name);
- use_iordy = (pio_mode > 2);
} else {
pio_mode = id->tPIO;
if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */
@@ -287,7 +284,6 @@ u8 ide_get_best_pio_mode (ide_drive_t *d
}
if (id->field_valid & 2) { /* drive implements ATA2? */
if (id->capability & 8) { /* drive supports use_iordy? */
- use_iordy = 1;
cycle_time = id->eide_pio_iordy;
if (id->eide_pio_modes & 7) {
overridden = 0;
@@ -325,7 +321,6 @@ u8 ide_get_best_pio_mode (ide_drive_t *d
if (d) {
d->pio_mode = pio_mode;
d->cycle_time = cycle_time ? cycle_time : ide_pio_timings[pio_mode].cycle_time;
- d->use_iordy = use_iordy;
}
return pio_mode;
}
Index: b/drivers/ide/pci/sl82c105.c
===================================================================
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -52,9 +52,10 @@
* Convert a PIO mode and cycle time to the required on/off times
* for the interface. This has protection against runaway timings.
*/
-static unsigned int get_pio_timings(ide_pio_data_t *p)
+static unsigned int get_pio_timings(ide_drive_t *drive, ide_pio_data_t *p)
{
unsigned int cmd_on, cmd_off;
+ u8 iordy = 0;
cmd_on = (ide_pio_timings[p->pio_mode].active_time + 29) / 30;
cmd_off = (p->cycle_time - 30 * cmd_on + 29) / 30;
@@ -65,7 +66,10 @@ static unsigned int get_pio_timings(ide_
if (cmd_off == 0)
cmd_off = 1;
- return (cmd_on - 1) << 8 | (cmd_off - 1) | (p->use_iordy ? 0x40 : 0x00);
+ if (p->pio_mode > 2 || ata_dev_has_iordy(drive->id))
+ iordy = 0x40;
+
+ return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy;
}
/*
@@ -82,7 +86,7 @@ static u8 sl82c105_tune_pio(ide_drive_t
pio = ide_get_best_pio_mode(drive, pio, 5, &p);
- drv_ctrl = get_pio_timings(&p);
+ drv_ctrl = get_pio_timings(drive, &p);
/*
* Store the PIO timings so that we can restore them
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1363,6 +1363,11 @@ extern void ide_toggle_bounce(ide_drive_
extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
int ide_use_fast_pio(ide_drive_t *);
+static inline int ata_dev_has_iordy(struct hd_driveid *id)
+{
+ return ((id->field_valid & 2) && (id->capability & 8)) ? 1 : 0;
+}
+
u8 ide_dump_status(ide_drive_t *, const char *, u8);
typedef struct ide_pio_timings_s {
@@ -1374,7 +1379,6 @@ typedef struct ide_pio_timings_s {
typedef struct ide_pio_data_s {
u8 pio_mode;
- u8 use_iordy;
unsigned int cycle_time;
} ide_pio_data_t;
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
