After my previous message on the same subject, I thought it would be useful
to report the following:
I recently installed a new disk on the same computer. This one is a Hitchi
HDS721616PLAT80.
When this disk is connected to the ICH5 controller, the following error
lines appear on boot:
-------------------------------------------------------------------
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xb0
-------------------------------------------------------------------
The drive is working perfectly. I even verified it with a tool provided by
the manufacturer. SMART also does not report any error .
The same disk gives no error whatsoever when connected to a ITE8212 IDE
Controler present on the same computer.
The overall configuration of this machine was given on my previous post.
Thank you for your attention.
Best regards
Miguel
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
