Add a hidden configuration for an architecture or machine to select to show that the pata_platform driver should be show in the configuration. This method is used to allow each individual machine/arch to specify this, instead of creating large "depends on" on the driver's Kconfig menu. If this patch is acceptable, I will submit a patch to move ARCH_RPC to select ARCH_HAS_PATA_PLATFORM. Signed-off-by: Ben Dooks <ben-linux@xxxxxxxxx> Index: linux-2.6.22-rc4-simtec/drivers/ata/Kconfig =================================================================== --- linux-2.6.22-rc4-simtec.orig/drivers/ata/Kconfig 2007-06-05 18:27:08.000000000 +0100 +++ linux-2.6.22-rc4-simtec/drivers/ata/Kconfig 2007-06-05 18:41:58.000000000 +0100 @@ -548,9 +548,15 @@ config PATA_WINBOND_VLB Support for the Winbond W83759A controller on Vesa Local Bus systems. +config ARCH_HAS_PATA_PLATFORM + bool + help + Internal config to show the architecture has at least one + machine which can use the pata_platform device support. + config PATA_PLATFORM tristate "Generic platform device PATA support" - depends on EMBEDDED || ARCH_RPC + depends on EMBEDDED || ARCH_RPC || ARCH_HAS_PATA_PLATFORM help This option enables support for generic directly connected ATA devices commonly found on embedded systems. - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
