The Kconfig is refactored to consolidate KEXEC and CRASH options from
various arch/<arch>/Kconfig files into new file kernel/Kconfig.kexec.
The Kconfig.kexec is now a submenu titled "Kexec and crash features"
located under "General Setup".
The following options are impacted:
- KEXEC
- KEXEC_FILE
- KEXEC_SIG
- KEXEC_SIG_FORCE
- KEXEC_BZIMAGE_VERIFY_SIG
- KEXEC_JUMP
- CRASH_DUMP
Over time, these options have been copied between Kconfig files and
are very similar to one another, but with slight differences.
The following architectures are impacted by the refactor (because of
use of one or more KEXEC/CRASH options):
- arm
- arm64
- ia64
- loongarch
- m68k
- mips
- parisc
- powerpc
- riscv
- s390
- sh
- x86
More information:
In the patch series "crash: Kernel handling of CPU and memory hot
un/plug"
https://lore.kernel.org/lkml/20230503224145.7405-1-eric.devolder@xxxxxxxxxx/
the new kernel feature introduces the config option CRASH_HOTPLUG.
In reviewing, Thomas Gleixner requested that the new config option
not be placed in x86 Kconfig. Rather the option needs a generic/common
home. To Thomas' point, the KEXEC and CRASH options have largely been
duplicated in the various arch/<arch>/Kconfig files, with minor
differences. This kind of proliferation is to be avoid/stopped.
https://lore.kernel.org/lkml/875y91yv63.ffs@tglx/
To that end, I have refactored the arch Kconfigs so as to consolidate
the various KEXEC and CRASH options. Generally speaking, this work has
the following themes:
- KEXEC and CRASH options are moved into new file kernel/Kconfig.kexec
- These items from arch/Kconfig:
CRASH_CORE KEXEC_CORE KEXEC_ELF HAVE_IMA_KEXEC
- These items from arch/x86/Kconfig form the common options:
KEXEC KEXEC_FILE KEXEC_SIG KEXEC_SIG_FORCE
KEXEC_BZIMAGE_VERIFY_SIG KEXEC_JUMP CRASH_DUMP
- The crash hotplug series appends CRASH_HOTPLUG to Kconfig.kexec
NOTE: PHYSICAL_START could be argued to be included in this series.
- The Kconfig.kexec is now a submenu titled "Kexec and crash features"
- The Kconfig.kexec is now listed in "General Setup" submenu from
init/Kconfig
- To control the main common options, new options ARCH_HAS_KEXEC,
ARCH_HAS_KEXEC_FILE and ARCH_HAS_CRASH_DUMP are introduced.
NOTE: I went with ARCH_HAS_ due to the existing ARCH_HAS_KEXEC_PURGATORY.
- To account for the slight differences, new options ARCH_SUPPORTS_KEXEC,
ARCH_SUPPORTS_KEXEC_FILE and ARCH_SUPPORTS_CRASH_DUMP are used to
elicit the same side effects as the original arch/<arch>/Kconfig
files for KEXEC and CRASH options.
NOTE: I'm open to a better name than 'ARCH_SUPPORTS', perhaps
ARCH_CUSTOMIZE ?
An example, 'make menuconfig' illustrating the submenu:
> General setup > Kexec and crash features
[*] Enable kexec system call
[*] Enable kexec file based system call
[*] Verify kernel signature during kexec_file_load() syscall
[ ] Require a valid signature in kexec_file_load() syscall
[ ] Enable bzImage signature verification support
[*] kexec jump
[*] kernel crash dumps
[*] Update the crash elfcorehdr on system configuration changes
The three main options are KEXEC, KEXEC_FILE and CRASH_DUMP. In the
process of consolidating these options, I encountered slight differences
in the coding of these options in several of the architectures. As a
result, I settled on the following solution:
- Each of three main options has a 'depends on ARCH_HAS_<option>'
statement: ARCH_HAS_KEXEC, ARCH_HAS_KEXEC_FILE, ARCH_HAS_CRASH_DUMP.
For example, the KEXEC_FILE option has a 'depends on
ARCH_HAS_KEXEC_FILE' statement.
- The boolean ARCH_HAS_<option> in effect allows the arch to determine
when the feature is allowed. Archs which don't have the feature
simply do not provide the corresponding ARCH_HAS_<option>.
For each arch, where there previously were KEXEC and/or CRASH
options, these have been replaced with the corresponding boolean
ARCH_HAS_<option>, and an appropriate def_bool statement.
For example, if the arch supports KEXEC_FILE, then the
ARCH_HAS_KEXEC_FILE simply has a 'def_bool y'. This permits the
KEXEC_FILE option to be available.
If the arch has a 'depends on' statement in its original coding
of the option, then that expression becomes part of the def_bool
expression. For example, arm64 had:
config KEXEC
depends on PM_SLEEP_SMP
and in this solution, this converts to:
config ARCH_HAS_KEXEC
def_bool PM_SLEEP_SMP
- In order to account for the differences in the config coding for
the three common options, the ARCH_SUPPORTS_<option> is used.
This options has a 'depends on <option>' statement to couple it
to the main option, and from there can insert the differences
from the common option and the arch original coding of that option.
For example, a few archs enable CRYPTO and CRYTPO_SHA256 for
KEXEC_FILE. These require a ARCH_SUPPORTS_KEXEC_FILE and
'select CRYPTO' and 'select CRYPTO_SHA256' statements.
Illustrating the option relationships:
For KEXEC:
ARCH_HAS_KEXEC <- KEXEC <- ARCH_SUPPORTS_KEXEC
KEXEC # in Kconfig.kexec
ARCH_HAS_KEXEC # in arch/<arch>/Kconfig, as needed
ARCH_SUPPORTS_KEXEC # in arch/<arch>/Kconfig, as needed
For KEXEC_FILE:
ARCH_HAS_KEXEC_FILE <- KEXEC_FILE <- ARCH_SUPPORTS_KEXEC_FILE
KEXEC_FILE # in Kconfig.kexec
ARCH_HAS_KEXEC_FILE # in arch/<arch>/Kconfig, as needed
ARCH_SUPPORTS_KEXEC_FILE # in arch/<arch>/Kconfig, as needed
For CRASH:
ARCH_HAS_CRASH_DUMP <- CRASH_DUMP <- ARCH_SUPPORTS_CRASH_DUMP
CRASH_DUMP # in Kconfig.kexec
ARCH_HAS_CRASH_DUMP # in arch/<arch>/Kconfig, as needed
ARCH_SUPPORTS_CRASH_DUMP # in arch/<arch>/Kconfig, as needed
To summarize, the ARCH_HAS_<option> permits the <option> to be
enabled, and the ARCH_SUPPORTS_<option> handles side effects (ie.
select statements).
Examples:
A few examples to show the new strategy in action:
===== x86 (minus the help section) =====
Original:
config KEXEC
bool "kexec system call"
select KEXEC_CORE
config KEXEC_FILE
bool "kexec file based system call"
select KEXEC_CORE
select HAVE_IMA_KEXEC if IMA
depends on X86_64
depends on CRYPTO=y
depends on CRYPTO_SHA256=y
config ARCH_HAS_KEXEC_PURGATORY
def_bool KEXEC_FILE
config KEXEC_SIG
bool "Verify kernel signature during kexec_file_load() syscall"
depends on KEXEC_FILE
config KEXEC_SIG_FORCE
bool "Require a valid signature in kexec_file_load() syscall"
depends on KEXEC_SIG
config KEXEC_BZIMAGE_VERIFY_SIG
bool "Enable bzImage signature verification support"
depends on KEXEC_SIG
depends on SIGNED_PE_FILE_VERIFICATION
select SYSTEM_TRUSTED_KEYRING
config CRASH_DUMP
bool "kernel crash dumps"
depends on X86_64 || (X86_32 && HIGHMEM)
config KEXEC_JUMP
bool "kexec jump"
depends on KEXEC && HIBERNATION
help
becomes...
New:
config ARCH_HAS_KEXEC
def_bool y
config ARCH_HAS_KEXEC_FILE
def_bool X86_64 && CRYPTO && CRYPTO_SHA256
config ARCH_SUPPORTS_KEXEC_FILE
def_bool y
depends on KEXEC_FILE
select HAVE_IMA_KEXEC if IMA
config ARCH_HAS_KEXEC_PURGATORY
def_bool KEXEC_FILE
config ARCH_HAS_KEXEC_JUMP
def_bool y
config ARCH_HAS_CRASH_DUMP
def_bool X86_64 || (X86_32 && HIGHMEM)
===== powerpc (minus the help section) =====
Original:
config KEXEC
bool "kexec system call"
depends on PPC_BOOK3S || PPC_E500 || (44x && !SMP)
select KEXEC_CORE
config KEXEC_FILE
bool "kexec file based system call"
select KEXEC_CORE
select HAVE_IMA_KEXEC if IMA
select KEXEC_ELF
depends on PPC64
depends on CRYPTO=y
depends on CRYPTO_SHA256=y
config ARCH_HAS_KEXEC_PURGATORY
def_bool KEXEC_FILE
config CRASH_DUMP
bool "Build a dump capture kernel"
depends on PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP)
select RELOCATABLE if PPC64 || 44x || PPC_85xx
becomes...
New:
config ARCH_HAS_KEXEC
def_bool PPC_BOOK3S || PPC_E500 || (44x && !SMP)
config ARCH_HAS_KEXEC_FILE
def_bool PPC64 && CRYPTO && CRYPTO_SHA256
config ARCH_HAS_KEXEC_PURGATORY
def_bool KEXEC_FILE
config ARCH_SUPPORTS_KEXEC_FILE
def_bool y
depends on KEXEC_FILE
select KEXEC_ELF
select HAVE_IMA_KEXEC if IMA
config ARCH_HAS_CRASH_DUMP
def_bool PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP)
config ARCH_SUPPORTS_CRASH_DUMP
def_bool y
depends on CRASH_DUMP
select RELOCATABLE if PPC64 || 44x || PPC_85xx
Testing Approach and Results
There are 388 config files in the arch/<arch>/configs directories.
For each of these config files, a .config is generated both before and
after this Kconfig series, and checked for equivalence. This approach
allows for a rather rapid check of all architectures and a wide
variety of configs wrt/ KEXEC and CRASH, and avoids requiring
compiling for all architectures and running kernels and run-time
testing.
As such, I developed the following script to compare the before and
after of 'make olddefconfig'. The new symbols introduced by this
series are filtered out, but otherwise the config files are PASS
only if they were equivalent, and FAIL otherwise.
The script performs the test by doing the following:
# Obtain the "golden" .config output for given config file
# Reset test sandbox
git checkout master
git branch -D test_Kconfig
git checkout -B test_Kconfig master
make distclean
# Write out updated config
cp -f <config file> .config
make ARCH=<arch> olddefconfig
# Track each item in .config, LHSB is "golden"
scoreboard .config
# Obtain the "changed" .config output for given config file
# Reset test sandbox
make distclean
# Apply this Kconfig series
git am <this Kconfig series>
# Write out updated config
cp -f <config file> .config
make ARCH=<arch> olddefconfig
# Track each item in .config, RHSB is "changed"
scoreboard .config
# Determine test result
# Filter-out new symbols introduced by this series
# Filter-out symbol=n which not in either scoreboard
# Compare LHSB "golden" and RHSB "changed" scoreboards and issue PASS/FAIL
The script was instrumental during the refactoring of Kconfig as it
continually revealed problems. The end result being that the solution
presented in this series passes all configs as checked by the script.
Regards,
eric
---
v1: 12jun2023
- Initial
- Based on 6.4.0-rc6
---
Eric DeVolder (21):
kexec: consolidate kexec and crash options into kernel/Kconfig.kexec
x86/kexec: refactor for kernel/Kconfig.kexec
arm/kexec: refactor for kernel/Kconfig.kexec
ia64/kexec: refactor for kernel/Kconfig.kexec
arm64/kexec: refactor for kernel/Kconfig.kexec
loongarch/kexec: refactor for kernel/Kconfig.kexec
m68k/kexec: refactor for kernel/Kconfig.kexec
mips/kexec: refactor for kernel/Kconfig.kexec
parisc/kexec: refactor for kernel/Kconfig.kexec
powerpc/kexec: refactor for kernel/Kconfig.kexec
riscv/kexec: refactor for kernel/Kconfig.kexec
s390/kexec: refactor for kernel/Kconfig.kexec
sh/kexec: refactor for kernel/Kconfig.kexec
crash: move a few code bits to setup support of crash hotplug
crash: add generic infrastructure for crash hotplug support
kexec: exclude elfcorehdr from the segment digest
crash: memory and CPU hotplug sysfs attributes
x86/crash: add x86 crash hotplug support
crash: hotplug support for kexec_load()
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
x86/crash: optimize CPU changes
.../admin-guide/mm/memory-hotplug.rst | 8 +
Documentation/core-api/cpu_hotplug.rst | 18 +
arch/Kconfig | 13 -
arch/arm/Kconfig | 29 +-
arch/arm64/Kconfig | 61 +--
arch/ia64/Kconfig | 28 +-
arch/loongarch/Kconfig | 26 +-
arch/m68k/Kconfig | 19 +-
arch/mips/Kconfig | 32 +-
arch/parisc/Kconfig | 34 +-
arch/powerpc/Kconfig | 55 +--
arch/riscv/Kconfig | 48 +--
arch/s390/Kconfig | 65 +---
arch/sh/Kconfig | 46 +--
arch/x86/Kconfig | 90 +----
arch/x86/include/asm/kexec.h | 18 +
arch/x86/kernel/crash.c | 140 ++++++-
drivers/base/cpu.c | 14 +
drivers/base/memory.c | 13 +
include/linux/crash_core.h | 9 +
include/linux/kexec.h | 63 +++-
include/uapi/linux/kexec.h | 1 +
init/Kconfig | 2 +
kernel/Kconfig.kexec | 134 +++++++
kernel/crash_core.c | 355 ++++++++++++++++++
kernel/kexec.c | 5 +
kernel/kexec_core.c | 6 +
kernel/kexec_file.c | 187 +--------
kernel/ksysfs.c | 15 +
29 files changed, 900 insertions(+), 634 deletions(-)
create mode 100644 kernel/Kconfig.kexec
--
2.31.1
|