Hi James,
After Oliver Upton changes, I think we don't need most of the stuff in
[Patch 29/32] and [Patch 30/32].
I have few questions related to the PSCI Version. Please scroll below.
> From: James Morse <james.morse@xxxxxxx>
> Sent: Friday, February 3, 2023 1:51 PM
> To: linux-pm@xxxxxxxxxxxxxxx; loongarch@xxxxxxxxxxxxxxx;
> kvmarm@xxxxxxxxxxxxxxx; kvm@xxxxxxxxxxxxxxx; linux-acpi@xxxxxxxxxxxxxxx;
> linux-arch@xxxxxxxxxxxxxxx; linux-ia64@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> x86@xxxxxxxxxx
[...]
>
> When the KVM_CAP_ARM_PSCI_TO_USER capability is available, userspace can
> request to handle PSCI calls.
>
> This is required for virtual CPU hotplug to allow the VMM to enforce the
> online/offline policy it has advertised via ACPI. By managing PSCI in
> user-space, the VMM is able to return PSCI_DENIED when the guest attempts
> to bring a disabled vCPU online.
> Without this, the VMM is only able to not-run the vCPU, the kernel will
> have already returned PSCI_SUCCESS to the guest. This results in
> timeouts during boot as the OS must wait for the secondary vCPU.
>
> SMCCC probe requires PSCI v1.x. If userspace only implements PSCI v0.2,
> the guest won't query SMCCC support through PSCI and won't use the
> spectre workarounds. We could hijack PSCI_VERSION and pretend to support
> v1.0 if userspace does not, then handle all v1.0 calls ourselves
> (including guessing the PSCI feature set implemented by the guest), but
> that seems unnecessary. After all the API already allows userspace to
> force a version lower than v1.0 using the firmware pseudo-registers.
>
> The KVM_REG_ARM_PSCI_VERSION pseudo-register currently resets to either
> v0.1 if userspace doesn't set KVM_ARM_VCPU_PSCI_0_2, or
> KVM_ARM_PSCI_LATEST (1.0).
I just saw the latest PSCI standard issue (Mar 2023 E Non-Confidential
PSCI 1.2 issue E) and it contains the DENIED return value for the CPU_ON.
Should we *explicitly* check for PSCI 1.2 support before allowing vCPU
Hot plug support? For this we would need KVM changes.
@James, Since Oliver's patches have now got merged with the kernel I think
you would need to rebase your RFC on the latest kernel as patches 29/32
And 30/32 will create conflicts.
Many thanks
Salil
>
> Suggested-by: James Morse <james.morse@xxxxxxx>
> Signed-off-by: Jean-Philippe Brucker <jean-philippe@xxxxxxxxxx>
> [morse: Added description of why this is required]
> Signed-off-by: James Morse <james.morse@xxxxxxx>
> ---
> Documentation/virt/kvm/api.rst | 14 ++++++++++++++
> Documentation/virt/kvm/arm/hypercalls.rst | 1 +
> arch/arm64/include/asm/kvm_host.h | 1 +
> arch/arm64/kvm/arm.c | 10 +++++++---
> arch/arm64/kvm/hypercalls.c | 2 +-
> arch/arm64/kvm/psci.c | 13 +++++++++++++
> include/kvm/arm_hypercalls.h | 1 +
> include/uapi/linux/kvm.h | 1 +
> 8 files changed, 39 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/virt/kvm/api.rst
> b/Documentation/virt/kvm/api.rst
> index 9a28a9cc1163..eb99436a1d97 100644
> --- a/Documentation/virt/kvm/api.rst
> +++ b/Documentation/virt/kvm/api.rst
> @@ -8289,6 +8289,20 @@ This capability indicates that KVM can pass
> unhandled hypercalls to userspace,
> if the VMM enables it. Hypercalls are passed with KVM_EXIT_HYPERCALL in
> kvm_run::hypercall.
>
> +8.38 KVM_CAP_ARM_PSCI_TO_USER
> +-----------------------------
> +
> +:Architectures: arm64
> +
> +When the VMM enables this capability, all PSCI calls are passed to
> userspace
> +instead of being handled by KVM. Capability KVM_CAP_ARM_HVC_TO_USER must
> be
> +enabled first.
> +
> +Userspace should support at least PSCI v1.0. Otherwise SMCCC features
> won't be
> +available to the guest. Userspace does not need to handle the
> SMCCC_VERSION
> +parameter for the PSCI_FEATURES function. The KVM_ARM_VCPU_PSCI_0_2 vCPU
> +feature should be set even if this capability is enabled.
> +
> 9. Known KVM API problems
> =========================
>
> diff --git a/Documentation/virt/kvm/arm/hypercalls.rst
> b/Documentation/virt/kvm/arm/hypercalls.rst
> index 3e23084644ba..4c111afa7d74 100644
> --- a/Documentation/virt/kvm/arm/hypercalls.rst
> +++ b/Documentation/virt/kvm/arm/hypercalls.rst
> @@ -34,6 +34,7 @@ The following registers are defined:
> - Allows any PSCI version implemented by KVM and compatible with
> v0.2 to be set with SET_ONE_REG
> - Affects the whole VM (even if the register view is per-vcpu)
> + - Defaults to PSCI 1.0 if userspace enables KVM_CAP_ARM_PSCI_TO_USER.
>
> * KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1:
> Holds the state of the firmware support to mitigate CVE-2017-5715, as
> diff --git a/arch/arm64/include/asm/kvm_host.h
> b/arch/arm64/include/asm/kvm_host.h
> index 40911ebfa710..a9eff47bcb43 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -214,6 +214,7 @@ struct kvm_arch {
> /* PSCI SYSTEM_SUSPEND enabled for the guest */
> #define KVM_ARCH_FLAG_SYSTEM_SUSPEND_ENABLED 5
> #define KVM_ARCH_FLAG_HVC_TO_USER 6
> +#define KVM_ARCH_FLAG_PSCI_TO_USER 7
>
> unsigned long flags;
>
> diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
> index 815b7e8f88e1..3dba4e01f4d8 100644
> --- a/arch/arm64/kvm/arm.c
> +++ b/arch/arm64/kvm/arm.c
> @@ -76,7 +76,7 @@ int kvm_arch_check_processor_compat(void *opaque)
> int kvm_vm_ioctl_enable_cap(struct kvm *kvm,
> struct kvm_enable_cap *cap)
> {
> - int r;
> + int r = -EINVAL;
>
> if (cap->flags)
> return -EINVAL;
> @@ -105,8 +105,11 @@ int kvm_vm_ioctl_enable_cap(struct kvm *kvm,
> r = 0;
> set_bit(KVM_ARCH_FLAG_HVC_TO_USER, &kvm->arch.flags);
> break;
> - default:
> - r = -EINVAL;
> + case KVM_CAP_ARM_PSCI_TO_USER:
> + if (test_bit(KVM_ARCH_FLAG_HVC_TO_USER, &kvm->arch.flags)) {
> + r = 0;
> + set_bit(KVM_ARCH_FLAG_PSCI_TO_USER, &kvm->arch.flags);
> + }
> break;
> }
>
> @@ -235,6 +238,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long
> ext)
> case KVM_CAP_PTP_KVM:
> case KVM_CAP_ARM_SYSTEM_SUSPEND:
> case KVM_CAP_ARM_HVC_TO_USER:
> + case KVM_CAP_ARM_PSCI_TO_USER:
> r = 1;
> break;
> case KVM_CAP_SET_GUEST_DEBUG2:
> diff --git a/arch/arm64/kvm/hypercalls.c b/arch/arm64/kvm/hypercalls.c
> index efaf05d40dab..3c2136cd7a3f 100644
> --- a/arch/arm64/kvm/hypercalls.c
> +++ b/arch/arm64/kvm/hypercalls.c
> @@ -121,7 +121,7 @@ static bool kvm_hvc_call_allowed(struct kvm_vcpu *vcpu,
> u32 func_id)
> }
> }
>
> -static int kvm_hvc_user(struct kvm_vcpu *vcpu)
> +int kvm_hvc_user(struct kvm_vcpu *vcpu)
> {
> int i;
> struct kvm_run *run = vcpu->run;
> diff --git a/arch/arm64/kvm/psci.c b/arch/arm64/kvm/psci.c
> index 7fbc4c1b9df0..8505b26f0a83 100644
> --- a/arch/arm64/kvm/psci.c
> +++ b/arch/arm64/kvm/psci.c
> @@ -418,6 +418,16 @@ static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)
> return 1;
> }
>
> +static bool kvm_psci_call_is_user(struct kvm_vcpu *vcpu)
> +{
> + /* Handle the special case of SMCCC probe through PSCI */
> + if (smccc_get_function(vcpu) == PSCI_1_0_FN_PSCI_FEATURES &&
> + smccc_get_arg1(vcpu) == ARM_SMCCC_VERSION_FUNC_ID)
> + return false;
> +
> + return test_bit(KVM_ARCH_FLAG_PSCI_TO_USER, &vcpu->kvm->arch.flags);
> +}
> +
> /**
> * kvm_psci_call - handle PSCI call if r0 value is in range
> * @vcpu: Pointer to the VCPU struct
> @@ -443,6 +453,9 @@ int kvm_psci_call(struct kvm_vcpu *vcpu)
> return 1;
> }
>
> + if (kvm_psci_call_is_user(vcpu))
> + return kvm_hvc_user(vcpu);
> +
> switch (kvm_psci_version(vcpu)) {
> case KVM_ARM_PSCI_1_1:
> return kvm_psci_1_x_call(vcpu, 1);
> diff --git a/include/kvm/arm_hypercalls.h b/include/kvm/arm_hypercalls.h
> index 1188f116cf4e..ea7073d1a82e 100644
> --- a/include/kvm/arm_hypercalls.h
> +++ b/include/kvm/arm_hypercalls.h
> @@ -6,6 +6,7 @@
>
> #include <asm/kvm_emulate.h>
>
> +int kvm_hvc_user(struct kvm_vcpu *vcpu);
> int kvm_hvc_call_handler(struct kvm_vcpu *vcpu);
>
> static inline u32 smccc_get_function(struct kvm_vcpu *vcpu)
> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
> index 2ead8b9aae56..c5da9d703a0f 100644
> --- a/include/uapi/linux/kvm.h
> +++ b/include/uapi/linux/kvm.h
> @@ -1176,6 +1176,7 @@ struct kvm_ppc_resize_hpt {
> #define KVM_CAP_S390_PROTECTED_ASYNC_DISABLE 224
> #define KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP 225
> #define KVM_CAP_ARM_HVC_TO_USER 226
> +#define KVM_CAP_ARM_PSCI_TO_USER 227
>
> #ifdef KVM_CAP_IRQ_ROUTING
>
> --
> 2.30.2
>
|