Re: [RFC v2 01/39] Kconfig: introduce HAS_IOPORT option and select it as necessary

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2022-05-06 at 14:53 +0200, Arnd Bergmann wrote:
> On Fri, May 6, 2022 at 2:27 PM Maciej W. Rozycki <macro@xxxxxxxxxxx> wrote:
> > On Fri, 6 May 2022, Arnd Bergmann wrote:
> > 
> > > >  If this is PCI/PCIe indeed, then an I/O access is just a different bit
> > > > pattern put on the bus/in the TLP in the address phase.  So what is there
> > > > inherent to the s390 architecture that prevents that different bit pattern
> > > > from being used?
> > > 
> > > The hardware design for PCI on s390 is very different from any other
> > > architecture, and more abstract. Rather than implementing MMIO register
> > > access as pointer dereference, this is a separate CPU instruction that
> > > takes a device/bar plus offset as arguments rather than a pointer, and
> > > Linux encodes this back into a fake __iomem token.
> > 
> >  OK, that seems to me like a reasonable and quite a clean design (on the
> > hardware side).
> > 
> >  So what happens if the instruction is given an I/O rather than memory BAR
> > as the relevant argument?  Is the address space indicator bit (bit #0)
> > simply ignored or what?
> 
> Not sure. My best guess is that it would actually work as you'd expect,
> but is deliberately left out of the architecture specification so they don't
> have to to validate the correctness.  Note that only a small number of
> PCIe cards are actually supported by IBM, and I think the firmware
> only passes devices to the OS if they are whitelisted.
> 
>         Arnd

Yes, though in Linux we do try hard to work with whatever is plugged
in. We did benefit from this in the past working with a new NIC from a
different vendor with 0 additional changes. Also you can use vfio-pci
to pass-through arbitrary PCI devices to a QEMU emulating s390x.




[Index of Archives]     [Linux Kernel]     [Sparc Linux]     [DCCP]     [Linux ARM]     [Yosemite News]     [Linux SCSI]     [Linux x86_64]     [Linux for Ham Radio]

  Powered by Linux