On Tue, Sep 12, 2017 at 10:09:51AM +0200, Linus Walleij wrote: > For ARM we now have two subarchs not using generic clockevents: > RISC PC and EBSA110. > > I think Russell stated these two cannot be converted to generic clockevents > because of hardware limitations I guess, no timer interrupt, simply, which > means no clockevents, or unreliable or not granular enough timers. > > IIUC the SA110 does not contain the built-in SoC goodies of the SA1100 > so it needs external timer blocks, and those two machines don't have > good enough timers. That's hardly surprising because SA1100 is a SoC, SA110 is just a CPU, containing no peripherals at all. EBSA110 only has one usable timer, which must be programmed to produce a regular timer tick to the OS: it's no good trying to double up the clocksource and a periodic clockevent onto one counter register - the clock source will see the same timer value +/- interrupt latency, and in any case it won't wrap in a power-of-2 manner. This breaks the assumptions behind the clocksource and timekeeping code, which are that we have a timer that wraps in a power-of-2 manner, and which takes much longer than the desired period to wrap. I think RiscPC may be convertable as there are two timers, and I think the second timer is unused (so could be programmed to the requirements of a clocksource) but is there much reason to bother given the EBSA110? I think there isn't. -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up According to speedtest.net: 8.21Mbps down 510kbps up -- To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
![]() |