2010/1/11 Bjorn Helgaas <bjorn.helgaas@xxxxxx>: > On Monday 11 January 2010 11:23:30 am Luck, Tony wrote: >> > printk(KERN_INFO PFX "Detected HP ZX1 %s AGP chipset " >> > "(ioc=%llx, lba=%llx)\n", (char *)context, >> > sba_hpa + HP_ZX1_IOC_OFFSET, lba_hpa); >> > >> >If hp_zx1_setup returned 0, we should see the "Detected HP ZX1 >> >HWP0003 AGP chipset" message next, but we don't Sorry guys, my mistake: I had the return AE_OK line; duplicated! > Émeric, can you grab the dmesg log instead, please? OK, please find below the contents of /var/log/dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.33-rc3 (root@longspeak) (gcc version 4.3.4 (Debian 4.3.4-6) ) #2 SMP Fri Jan 8 20:36:36 CET 2010 [ 0.000000] EFI v1.10 by HP: SALsystab=0x3fb38000 ACPI 2.0=0x3fb2e000 SMBIOS=0x3fb3a000 HCDP=0x3fb2c000 [ 0.000000] booting generic kernel on platform hpzx1 [ 0.000000] PCDP: v0 at 0x3fb2c000 [ 0.000000] ACPI: RSDP 000000003fb2e000 00028 (v02 HP) [ 0.000000] ACPI: XSDT 000000003fb2e02c 00094 (v01 HP zx6000 00000000 HP 00000000) [ 0.000000] ACPI: FACP 000000003fb36800 000F4 (v03 HP zx6000 00000000 HP 00000000) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe0Block: 32/16 (20091214/tbfadt-526) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 32/16 (20091214/tbfadt-526) [ 0.000000] ACPI: DSDT 000000003fb2e0e0 05781 (v01 HP zx6000 00000007 INTL 02012044) [ 0.000000] ACPI: FACS 000000003fb368f8 00040 [ 0.000000] ACPI: SPCR 000000003fb36938 00050 (v01 HP zx6000 00000000 HP 00000000) [ 0.000000] ACPI: DBGP 000000003fb36988 00034 (v01 HP zx6000 00000000 HP 00000000) [ 0.000000] ACPI: APIC 000000003fb36a48 000B0 (v01 HP zx6000 00000000 HP 00000000) [ 0.000000] ACPI: SPMI 000000003fb369c0 00050 (v04 HP zx6000 00000000 HP 00000000) [ 0.000000] ACPI: CPEP 000000003fb36a10 00034 (v01 HP zx6000 00000000 HP 00000000) [ 0.000000] ACPI: SSDT 000000003fb33870 001D6 (v01 HP zx6000 00000006 INTL 02012044) [ 0.000000] ACPI: SSDT 000000003fb33a50 00342 (v01 HP zx6000 00000006 INTL 02012044) [ 0.000000] ACPI: SSDT 000000003fb33da0 00A16 (v01 HP zx6000 00000006 INTL 02012044) [ 0.000000] ACPI: SSDT 000000003fb347c0 00A16 (v01 HP zx6000 00000006 INTL 02012044) [ 0.000000] ACPI: SSDT 000000003fb351e0 00A16 (v01 HP zx6000 00000006 INTL 02012044) [ 0.000000] ACPI: SSDT 000000003fb35c00 00A16 (v01 HP zx6000 00000006 INTL 02012044) [ 0.000000] ACPI: SSDT 000000003fb36620 000EB (v01 HP zx6000 00000006 INTL 02012044) [ 0.000000] ACPI: SSDT 000000003fb36710 000EF (v01 HP zx6000 00000006 INTL 02012044) [ 0.000000] ACPI: Local APIC address c0000000fee00000 [ 0.000000] 2 CPUs available, 2 CPUs total [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] Initial ramdisk at: 0xe0000040fe247000 (13944150 bytes) [ 0.000000] SAL 3.1: HP version 2.31 [ 0.000000] SAL Platform features: None [ 0.000000] SAL: AP wakeup using external interrupt vector 0xff [ 0.000000] ACPI: Local APIC address c0000000fee00000 [ 0.000000] GSI 36 (level, low) -> CPU 0 (0x0000) vector 49 [ 0.000000] MCA related initialization done [ 0.000000] Virtual mem_map starts at 0xa0007fffc7200000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000400 -> 0x00040000 [ 0.000000] Normal 0x00040000 -> 0x01040000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000400 -> 0x0000fd79 [ 0.000000] 0: 0x0000fec0 -> 0x0000fecb [ 0.000000] 0: 0x00040000 -> 0x00060000 [ 0.000000] 0: 0x01010000 -> 0x0103ff5a [ 0.000000] 0: 0x0103ff69 -> 0x0103ff84 [ 0.000000] 0: 0x0103ffa0 -> 0x0103fff0 [ 0.000000] On node 0 totalpages: 391497 [ 0.000000] free_area_init_node: node 0, pgdat e000000001300000, node_mem_map a0007fffc720e000 [ 0.000000] DMA zone: 893 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 62983 pages, LIFO batch:7 [ 0.000000] Normal zone: 57344 pages used for memmap [ 0.000000] Normal zone: 270277 pages, LIFO batch:7 [ 0.000000] pcpu-alloc: s30104 r8192 d27240 u65536 alloc=4*16384 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 333260 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=scsi1:/EFI/debian/vmlinuz root=/dev/sdb2 drm.debug=1 ro [ 0.000000] PID hash table entries: 4096 (order: 1, 32768 bytes) [ 0.000000] Memory: 6213952k/6238512k available (7026k code, 50000k reserved, 3489k data, 848k init) [ 0.000000] SLUB: Genslabs=16, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=256 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1024 [ 0.000000] CPU 0: base freq=200.000MHz, ITC ratio=15/2, ITC freq=1500.000MHz+/-750ppm [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.004000] Calibrating delay loop... 2244.60 BogoMIPS (lpj=4489216) [ 0.100064] Security Framework initialized [ 0.100102] SELinux: Disabled at boot. [ 0.100430] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes) [ 0.107583] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes) [ 0.111506] Mount-cache hash table entries: 1024 [ 0.111829] Initializing cgroup subsys ns [ 0.111866] Initializing cgroup subsys cpuacct [ 0.111902] Initializing cgroup subsys devices [ 0.111936] Initializing cgroup subsys freezer [ 0.111969] Initializing cgroup subsys net_cls [ 0.112038] ACPI: Core revision 20091214 [ 0.114975] Boot processor id 0x0/0x0 [ 0.000000] Fixed BSP b0 value from CPU 1 [ 0.000000] CPU 1: synchronized ITC with CPU 0 (last diff -31 cycles, maxerr 669 cycles) [ 0.000000] CPU 1: base freq=200.000MHz, ITC ratio=15/2, ITC freq=1500.000MHz+/-750ppm [ 0.117273] Brought up 2 CPUs [ 0.117307] Total of 2 processors activated (4489.21 BogoMIPS). [ 0.118318] DMI 2.3 present. [ 0.118494] regulator: core version 0.5 [ 0.118581] NET: Registered protocol family 16 [ 0.118734] ACPI: bus type pci registered [ 0.119357] bio: create slab <bio-0> at 0 [ 0.120238] ACPI: EC: Look up EC in DSDT [ 0.129188] ACPI: Interpreter enabled [ 0.129220] ACPI: (supports S0 S5) [ 0.129292] ACPI: Using IOSAPIC for interrupt routing [ 0.268370] ACPI: No dock devices found. [ 0.281593] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.307987] pci_root HWP0002:00: host bridge window [io 0x0000-0x03af] [ 0.308006] pci_root HWP0002:00: host bridge window [io 0x03e0-0x1fff] [ 0.308042] pci_root HWP0002:00: host bridge window [mem 0x80000000-0x8fffffff] [ 0.308089] pci_root HWP0002:00: host bridge window [mem 0x80004000000-0x80103fffffe] [ 0.308730] pci 0000:00:01.0: reg 10: [mem 0x80023000-0x80023fff] [ 0.309898] pci 0000:00:01.0: supports D1 D2 [ 0.309901] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot [ 0.309966] pci 0000:00:01.0: PME# disabled [ 0.310612] pci 0000:00:01.1: reg 10: [mem 0x80022000-0x80022fff] [ 0.311770] pci 0000:00:01.1: supports D1 D2 [ 0.311773] pci 0000:00:01.1: PME# supported from D0 D1 D2 D3hot [ 0.311837] pci 0000:00:01.1: PME# disabled [ 0.312493] pci 0000:00:01.2: reg 10: [mem 0x80021000-0x800210ff] [ 0.313652] pci 0000:00:01.2: supports D1 D2 [ 0.313655] pci 0000:00:01.2: PME# supported from D0 D1 D2 D3hot [ 0.313719] pci 0000:00:01.2: PME# disabled [ 0.314515] pci 0000:00:02.0: reg 10: [io 0x0d58-0x0d5f] [ 0.314640] pci 0000:00:02.0: reg 14: [io 0x0d64-0x0d67] [ 0.314766] pci 0000:00:02.0: reg 18: [io 0x0d50-0x0d57] [ 0.314891] pci 0000:00:02.0: reg 1c: [io 0x0d60-0x0d63] [ 0.315017] pci 0000:00:02.0: reg 20: [io 0x0d40-0x0d4f] [ 0.315718] pci 0000:00:02.0: supports D1 D2 [ 0.316372] pci 0000:00:03.0: reg 10: [mem 0x80020000-0x80020fff] [ 0.316497] pci 0000:00:03.0: reg 14: [io 0x0d00-0x0d3f] [ 0.316626] pci 0000:00:03.0: reg 18: [mem 0x80000000-0x8001ffff] [ 0.317541] pci 0000:00:03.0: supports D1 D2 [ 0.317544] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.317608] pci 0000:00:03.0: PME# disabled [ 0.318595] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI0._PRT] [ 0.335756] ACPI: PCI Root Bridge [PCI1] (0000:20) [ 0.366412] pci_root HWP0002:01: host bridge window [mem 0xff5e0000-0xff5e0007] [ 0.366459] pci_root HWP0002:01: host bridge window [mem 0xff5e2000-0xff5e2007] [ 0.366507] pci_root HWP0002:01: host bridge window [io 0x2000-0x2fff] [ 0.366544] pci_root HWP0002:01: host bridge window [mem 0x90000000-0x97ffffff] [ 0.366591] pci_root HWP0002:01: host bridge window [mem 0x90004000000-0x90103fffffe] [ 0.367456] pci 0000:20:01.0: reg 10: [io 0x2100-0x21ff] [ 0.367749] pci 0000:20:01.0: reg 14: [mem 0x90840000-0x9084ffff 64bit] [ 0.368041] pci 0000:20:01.0: reg 1c: [mem 0x90830000-0x9083ffff 64bit] [ 0.368334] pci 0000:20:01.0: reg 30: [mem 0x90400000-0x907fffff pref] [ 0.368986] pci 0000:20:01.0: supports D1 D2 [ 0.369965] pci 0000:20:01.1: reg 10: [io 0x2000-0x20ff] [ 0.370257] pci 0000:20:01.1: reg 14: [mem 0x90820000-0x9082ffff 64bit] [ 0.370550] pci 0000:20:01.1: reg 1c: [mem 0x90810000-0x9081ffff 64bit] [ 0.370843] pci 0000:20:01.1: reg 30: [mem 0x90000000-0x903fffff pref] [ 0.371495] pci 0000:20:01.1: supports D1 D2 [ 0.372907] pci 0000:20:02.0: reg 10: [mem 0x90800000-0x9080ffff 64bit] [ 0.374393] pci 0000:20:02.0: PME# supported from D3hot D3cold [ 0.374469] pci 0000:20:02.0: PME# disabled [ 0.375776] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI1._PRT] [ 0.397173] ACPI: PCI Root Bridge [PCI2] (0000:40) [ 0.421300] pci_root HWP0002:02: host bridge window [io 0x3000-0x5fff] [ 0.421337] pci_root HWP0002:02: host bridge window [mem 0x98000000-0xafffffff] [ 0.421384] pci_root HWP0002:02: host bridge window [mem 0xa0004000000-0xa0103fffffe] [ 0.422243] pci 0000:40:01.0: reg 10: [io 0x3000-0x307f] [ 0.423891] pci 0000:40:01.0: supports D2 [ 0.424742] pci 0000:40:01.1: reg 10: [io 0x3080-0x308f] [ 0.426389] pci 0000:40:01.1: supports D1 [ 0.426393] pci 0000:40:01.1: PME# supported from D1 D3hot [ 0.426482] pci 0000:40:01.1: PME# disabled [ 0.428222] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI2._PRT] [ 0.483306] ACPI: PCI Root Bridge [PCI3] (0000:60) [ 0.507389] pci_root HWP0002:03: host bridge window [io 0x6000-0x7fff] [ 0.507426] pci_root HWP0002:03: host bridge window [mem 0xb0000000-0xc7ffffff] [ 0.507473] pci_root HWP0002:03: host bridge window [mem 0xb0004000000-0xb0103fffffe] [ 0.509080] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI3._PRT] [ 0.531256] ACPI: PCI Root Bridge [PCI4] (0000:80) [ 0.560665] pci_root HWP0003:00: host bridge window [io 0x03b0-0x03df] [ 0.560703] pci_root HWP0003:00: host bridge window [io 0x8000-0xbfff] [ 0.560739] pci_root HWP0003:00: host bridge window [mem 0x000a0000-0x000fffff] [ 0.560786] pci_root HWP0003:00: host bridge window [mem 0xc8000000-0xdfffffff] [ 0.560833] pci_root HWP0003:00: host bridge window [mem 0xc0004000000-0xc0103fffffe] [ 0.562070] pci 0000:80:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref] [ 0.562295] pci 0000:80:00.0: reg 14: [io 0x8000-0x80ff] [ 0.562520] pci 0000:80:00.0: reg 18: [mem 0xd8030000-0xd803ffff] [ 0.563407] pci 0000:80:00.0: reg 30: [mem 0xd8000000-0xd801ffff pref] [ 0.563577] pci 0000:80:00.0: Boot video device [ 0.564555] pci 0000:80:00.0: supports D1 D2 [ 0.565779] pci 0000:80:00.1: reg 10: [mem 0xc8000000-0xcfffffff pref] [ 0.566005] pci 0000:80:00.1: reg 14: [mem 0xd8020000-0xd802ffff] [ 0.567884] pci 0000:80:00.1: supports D1 D2 [ 0.570162] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI4._PRT] [ 0.624610] ACPI: PCI Root Bridge [PCI6] (0000:c0) [ 0.648710] pci_root HWP0002:04: host bridge window [io 0xc000-0xdfff] [ 0.648747] pci_root HWP0002:04: host bridge window [mem 0xe0000000-0xefffffff] [ 0.648794] pci_root HWP0002:04: host bridge window [mem 0xe0004000000-0xe0103fffffe] [ 0.650891] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI6._PRT] [ 0.658449] vgaarb: device added: PCI:0000:80:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.658497] vgaarb: loaded [ 0.704871] ioc_init: PAGE_SIZE 16K, iovp_size 16K [ 0.704907] ioc_iova_init() hpa c0000000fed01000 IOV base 0x40000000 mask 0xffffffffc0000000 (1024MB) [ 0.705183] ioc_iova_init() IOV page size 16K pdir e000004080e80000 size 80000 [ 0.707369] IOC: reserving 512Mb of IOVA space at 0x60000000 for agpgart [ 0.707405] put cookie at 0xe000004080ec0000: 0xbadbadc0ffee [ 0.707440] ioc_resource_init() res_size 0x1000 [ 0.707476] ioc_resource_init() res_map 1000 e000004080e2c000 [ 0.707512] IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000 [ 0.757826] Switching to clocksource itc [ 0.759043] pnp: PnP ACPI init [ 0.759099] ACPI: bus type pnp registered [ 0.839792] GSI 34 (edge, high) -> CPU 1 (0x0100) vector 50 [ 0.840842] GSI 35 (edge, high) -> CPU 0 (0x0000) vector 51 [ 0.941058] pnp: PnP ACPI: found 10 devices [ 0.941090] ACPI: ACPI bus type pnp unregistered [ 0.941321] NET: Registered protocol family 2 [ 0.941505] IP route cache hash table entries: 262144 (order: 7, 2097152 bytes) [ 0.942609] TCP established hash table entries: 524288 (order: 9, 8388608 bytes) [ 0.949804] TCP bind hash table entries: 65536 (order: 6, 1048576 bytes) [ 0.951430] TCP: Hash tables configured (established 524288 bind 65536) [ 0.951468] TCP reno registered [ 0.951510] UDP hash table entries: 4096 (order: 3, 131072 bytes) [ 0.951720] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes) [ 0.952086] NET: Registered protocol family 1 [ 0.952534] pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling [ 0.952929] PCI: CLS 128 bytes, default 128 [ 0.953019] Unpacking initramfs... [ 1.430372] Freeing initrd memory: 13600kB freed [ 1.430688] perfmon: version 2.0 IRQ 238 [ 1.430729] perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits) [ 1.431445] perfmon: added sampling format default_format [ 1.431480] perfmon_default_smpl: default_format v2.0 registered [ 1.431657] audit: initializing netlink socket (disabled) [ 1.431709] type=2000 audit(1263243355.430:1): initialized [ 1.432254] HugeTLB registered 256 MB page size, pre-allocated 0 pages [ 1.434043] VFS: Disk quotas dquot_6.5.2 [ 1.434145] Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) [ 1.434325] msgmni has been set to 12163 [ 1.434681] alg: No test for stdrng (krng) [ 1.434779] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.434827] io scheduler noop registered [ 1.434859] io scheduler deadline registered [ 1.434962] io scheduler cfq registered (default) [ 1.435220] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.435267] ACPI: Power Button [PWRF] [ 1.435365] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1 [ 1.435411] ACPI: Sleep Button [SLPF] [ 1.525453] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.525493] ACPI: Thermal Zone [THM0] (27 C) [ 1.526776] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.527052] 00:04: ttyS0 at MMIO 0xff5e0000 (irq = 50) is a 16550A [ 1.527184] 00:05: ttyS1 at MMIO 0xff5e2000 (irq = 51) is a 16550A [ 1.527418] mice: PS/2 mouse device common for all mice [ 1.527512] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0 [ 1.527926] TCP cubic registered [ 1.527959] NET: Registered protocol family 17 [ 1.528062] registered taskstats version 1 [ 1.533062] rtc-efi rtc-efi: setting system clock to 2010-01-11 20:55:55 UTC (1263243355) [ 1.533136] Freeing unused kernel memory: 848kB freed [ 1.752397] usbcore: registered new interface driver usbfs [ 1.752523] usbcore: registered new interface driver hub [ 1.752836] usbcore: registered new device driver usb [ 1.755324] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.757308] GSI 18 (level, low) -> CPU 1 (0x0100) vector 52 [ 1.757345] ehci_hcd 0000:00:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 52 [ 1.757420] ehci_hcd 0000:00:01.2: EHCI Host Controller [ 1.757478] ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 [ 1.759149] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.759187] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.786466] ehci_hcd 0000:00:01.2: irq 52, io mem 0x80021000 [ 1.787701] SCSI subsystem initialized [ 1.806901] ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 0.95 [ 1.806976] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.807012] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.807058] usb usb1: Product: EHCI Host Controller [ 1.807092] usb usb1: Manufacturer: Linux 2.6.33-rc3 ehci_hcd [ 1.807126] usb usb1: SerialNumber: 0000:00:01.2 [ 1.807262] hub 1-0:1.0: USB hub found [ 1.807298] hub 1-0:1.0: 5 ports detected [ 1.807626] GSI 20 (level, low) -> CPU 0 (0x0000) vector 53 [ 1.807663] e100 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 53 [ 1.807722] Uniform Multi-Platform E-IDE driver [ 1.821772] tg3.c:v3.105 (December 2, 2009) [ 1.821975] GSI 29 (level, low) -> CPU 1 (0x0100) vector 54 [ 1.822011] tg3 0000:20:02.0: PCI INT A -> GSI 29 (level, low) -> IRQ 54 [ 1.823232] Fusion MPT base driver 3.04.13 [ 1.823264] Copyright (c) 1999-2008 LSI Corporation [ 1.831985] Fusion MPT SPI Host driver 3.04.13 [ 1.840008] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.904896] e100 0000:00:03.0: PME# disabled [ 1.905258] e100: eth0: e100_probe: addr 0x80020000, irq 53, MAC addr 00:30:6e:4a:d3:ab [ 1.905333] cmd64x 0000:00:02.0: IDE controller (0x1095:0x0649 rev 0x02) [ 1.905517] GSI 21 (level, low) -> CPU 0 (0x0000) vector 55 [ 1.905553] CMD64x_IDE 0000:00:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 55 [ 1.905696] cmd64x 0000:00:02.0: IDE port disabled [ 1.905834] cmd64x 0000:00:02.0: 100% native mode on irq 55 [ 1.905905] ide0: BM-DMA at 0x0d40-0x0d47 [ 1.905975] Probing IDE interface ide0... [ 2.309559] hda: DV-28E-B, ATAPI CD/DVD-ROM drive [ 2.981312] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 2.986886] hda: UDMA/33 mode selected [ 2.987175] ide0 at 0xd58-0xd5f,0xd66 on irq 55 [ 2.987456] GSI 16 (level, low) -> CPU 1 (0x0100) vector 56 [ 2.987492] ohci_hcd 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 56 [ 2.987562] ohci_hcd 0000:00:01.0: OHCI Host Controller [ 2.987606] ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2 [ 2.987670] ohci_hcd 0000:00:01.0: irq 56, io mem 0x80023000 [ 3.203986] eth1: Tigon3 [partno(BCM95700A6) rev 0105] (PCI:66MHz:64-bit) MAC address 00:30:6e:4a:d2:bd [ 3.204037] eth1: attached PHY is 5701 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 3.204085] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0] [ 3.204120] eth1: dma_rwctrl[76ff2d0f] dma_mask[64-bit] [ 3.204938] GSI 27 (level, low) -> CPU 0 (0x0000) vector 57 [ 3.204974] mptspi 0000:20:01.0: PCI INT A -> GSI 27 (level, low) -> IRQ 57 [ 3.205224] mptbase: ioc0: Initiating bringup [ 3.555307] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.555344] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.555390] usb usb2: Product: OHCI Host Controller [ 3.555423] usb usb2: Manufacturer: Linux 2.6.33-rc3 ohci_hcd [ 3.555457] usb usb2: SerialNumber: 0000:00:01.0 [ 3.555652] hub 2-0:1.0: USB hub found [ 3.555691] hub 2-0:1.0: 3 ports detected [ 3.562321] GSI 17 (level, low) -> CPU 1 (0x0100) vector 58 [ 3.562358] ohci_hcd 0000:00:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 58 [ 3.562428] ohci_hcd 0000:00:01.1: OHCI Host Controller [ 3.562477] ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 3 [ 3.562552] ohci_hcd 0000:00:01.1: irq 58, io mem 0x80022000 [ 3.587876] libata version 3.00 loaded. [ 3.813250] ioc0: LSI53C1030 B2: Capabilities={Initiator,Target} [ 4.128151] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.128188] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.128234] usb usb3: Product: OHCI Host Controller [ 4.128267] usb usb3: Manufacturer: Linux 2.6.33-rc3 ohci_hcd [ 4.128301] usb usb3: SerialNumber: 0000:00:01.1 [ 4.128496] hub 3-0:1.0: USB hub found [ 4.128533] hub 3-0:1.0: 2 ports detected [ 4.136839] ide-cd driver 5.00 [ 4.142826] ide-cd: hda: ATAPI 24X DVD-ROM drive, 256kB Cache [ 4.142926] Uniform CD-ROM driver Revision: 3.20 [ 4.297256] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 4.473279] usb 2-1: New USB device found, idVendor=045e, idProduct=0040 [ 4.473316] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.473353] usb 2-1: Product: Microsoft Wheel Mouse Optical® [ 4.473387] usb 2-1: Manufacturer: Microsoft [ 4.488769] usbcore: registered new interface driver hiddev [ 4.495905] scsi0 : ioc0: LSI53C1030 B2, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=57 [ 4.497398] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:01.0/usb2/2-1/2-1:1.0/input/input2 [ 4.497500] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:01.0-1/input0 [ 4.497586] usbcore: registered new interface driver usbhid [ 4.497620] usbhid: USB HID core driver [ 4.866083] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 5.035108] usb 3-1: New USB device found, idVendor=03f0, idProduct=0024 [ 5.035145] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.035181] usb 3-1: Product: HP Basic USB Keyboard [ 5.035214] usb 3-1: Manufacturer: CHICONY [ 5.047299] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:01.1/usb3/3-1/3-1:1.0/input/input3 [ 5.047384] generic-usb 0003:03F0:0024.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:01.1-1/input0 [ 5.131526] GSI 28 (level, low) -> CPU 0 (0x0000) vector 59 [ 5.131562] mptspi 0000:20:01.1: PCI INT B -> GSI 28 (level, low) -> IRQ 59 [ 5.131830] mptbase: ioc1: Initiating bringup [ 5.610086] ioc1: LSI53C1030 B2: Capabilities={Initiator,Target} [ 6.292603] scsi1 : ioc1: LSI53C1030 B2, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=59 [ 6.293267] scsi 0:0:0:0: Direct-Access HP 73.4G ST373453LC HPC5 PQ: 0 ANSI: 3 [ 6.293325] scsi target0:0:0: Beginning Domain Validation [ 6.952930] scsi target0:0:0: Ending Domain Validation [ 6.953034] scsi target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63) [ 6.955828] scsi 0:0:1:0: Direct-Access HP 73.4G ST373453LC HPC5 PQ: 0 ANSI: 3 [ 6.955879] scsi target0:0:1: Beginning Domain Validation [ 6.970884] scsi target0:0:1: Ending Domain Validation [ 6.970985] scsi target0:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63) [ 7.436537] scsi 1:0:2:0: Direct-Access HP 73.4G ST373453LC HPC5 PQ: 0 ANSI: 3 [ 7.436589] scsi target1:0:2: Beginning Domain Validation [ 7.451587] scsi target1:0:2: Ending Domain Validation [ 7.452295] scsi target1:0:2: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63) [ 10.232934] sd 0:0:0:0: [sda] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 10.233101] sd 0:0:1:0: [sdb] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 10.234256] sd 0:0:0:0: [sda] Write Protect is off [ 10.234290] sd 0:0:0:0: [sda] Mode Sense: d3 00 10 08 [ 10.234413] sd 0:0:1:0: [sdb] Write Protect is off [ 10.234447] sd 0:0:1:0: [sdb] Mode Sense: d3 00 10 08 [ 10.235862] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 10.236018] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 10.239322] sda: [ 10.239450] sdb: sda1 sda2 sda3 [ 10.263652] sdb1 sdb2 sdb3 [ 10.264570] sd 0:0:0:0: [sda] Attached SCSI disk [ 10.268270] sd 0:0:1:0: [sdb] Attached SCSI disk [ 10.455713] sd 1:0:2:0: [sdc] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 10.457160] sd 1:0:2:0: [sdc] Write Protect is off [ 10.457194] sd 1:0:2:0: [sdc] Mode Sense: d3 00 10 08 [ 10.458770] sd 1:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 10.462219] sdc: sdc1 sdc2 sdc3 [ 10.490504] sd 1:0:2:0: [sdc] Attached SCSI disk [ 10.635614] EXT4-fs (sdb2): mounted filesystem with ordered data mode [ 11.943029] udev: starting version 149 [ 12.366136] gameport: FM801 is pci0000:40:01.1/gameport0, io 0x3080, speed 875kHz [ 13.015603] Linux video capture interface: v2.00 [ 13.222727] GSI 38 (level, low) -> CPU 1 (0x0100) vector 60 [ 13.222767] FM801 0000:40:01.0: PCI INT A -> GSI 38 (level, low) -> IRQ 60 [ 13.781229] Adding 2000768k swap on /dev/sdb3. Priority:-1 extents:1 across:2000768k [ 13.986234] Linux agpgart interface v0.103 [ 13.992347] agp_hp_init [ 14.091509] agpgart: HP ZX1 IOC: IOPDIR shared with sba_iommu [ 14.091546] GART at 0xe000004080ec0000 [ 14.091577] read cookie at 0xe000004080ec0000: 0xbadbadc0ffee [ 14.091618] hp_zx1_create_gatt_table [ 14.092261] (null): AGP aperture is 512M @ 0x60000000 [ 14.092295] agp_add_bridge: returning 0 (success) [ 14.092328] hp_zx1_setup: agp_add_bridge returned 0 [ 14.092361] zx1_gart_probe: hp_zx1_setup returned 0 [ 14.092394] agpgart: Detected HP ZX1 HWP0003 AGP chipset (ioc=fed01000, lba=fed28000) [ 15.170624] fuse init (API version 7.13) [ 17.241305] NET: Registered protocol family 10 [ 17.242003] lo: Disabled Privacy Extensions [ 17.242896] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 17.687542] tg3: eth1: Link is up at 10 Mbps, half duplex. [ 17.687594] tg3: eth1: Flow control is off for TX and off for RX. [ 17.691303] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 18.173271] lp: driver loaded but no devices found [ 18.179094] ppdev: user-space parallel port driver Looks as expected this time :-) I've initially posted the dmesg command output because drm-related messages don't seem to be logged in /var/log/dmesg. We thus could have the impression that everything is fine, but the dmesg command output reveals that the drm_mmap_locked error is still there: [ 26.337042] [drm] Initialized drm 1.1.0 20060810 [ 26.654034] [drm] radeon defaulting to userspace modesetting. [ 26.654042] [drm:drm_init], [ 26.654119] [drm:drm_get_dev], [ 26.654674] [drm:drm_get_minor], [ 26.656293] [drm:drm_get_minor], new minor assigned 0 [ 26.656468] [drm:drm_addmap_core], offset = 0xd8030000, size = 0x00010000, type = 1 [ 26.656478] [drm:radeon_driver_load], AGP card detected [ 26.656483] [drm] Initialized radeon 1.31.0 20080528 for 0000:80:00.0 on minor 0 [ 26.657092] [drm:drm_stub_open], [ 26.657097] [drm:drm_open_helper], pid = 1576, minor = 0 [ 26.657102] [drm:radeon_driver_open], [ 26.657107] [drm:drm_addmap_core], offset = 0x00000000, size = 0x00010000, type = 2 [ 26.657140] [drm:drm_addmap_core], 65536 16 a000000203600000 [ 26.657147] [drm:drm_addmap_core], offset = 0xd0000000, size = 0x08000000, type = 0 [ 26.657154] [drm:drm_setup], [ 26.657215] [drm:drm_ioctl], pid=1576, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1 [ 26.657230] [drm:drm_ioctl], pid=1576, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1 [ 26.657240] [drm:drm_ioctl], pid=1576, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1 [ 26.657284] [drm:drm_ioctl], pid=1576, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1 [ 26.657291] [drm:drm_ioctl], pid=1576, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1 [ 26.657383] [drm:drm_release], open_count = 1 [ 26.657387] [drm:drm_release], pid = 1576, device = 0xe200, open_count = 1 [ 26.657398] [drm:drm_lastclose], [ 26.657404] [drm:radeon_do_cleanup_cp], [ 26.657407] [drm:drm_lastclose], driver lastclose completed [ 26.657413] [drm:drm_lastclose], lastclose completed [ 26.963807] [drm:drm_stub_open], [ 26.963811] [drm:drm_open_helper], pid = 1576, minor = 0 [ 26.963816] [drm:radeon_driver_open], [ 26.963820] [drm:drm_addmap_core], offset = 0x00000000, size = 0x00010000, type = 2 [ 26.963855] [drm:drm_addmap_core], 65536 16 a000000203700000 [ 26.963860] [drm:drm_addmap_core], offset = 0xd0000000, size = 0x08000000, type = 0 [ 26.963866] [drm:drm_setup], [ 26.963885] [drm:drm_ioctl], pid=1576, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1 [ 26.963892] [drm:drm_ioctl], pid=1576, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1 [ 26.963903] [drm:drm_release], open_count = 1 [ 26.963906] [drm:drm_release], pid = 1576, device = 0xe200, open_count = 1 [ 26.963915] [drm:drm_lastclose], [ 26.963919] [drm:radeon_do_cleanup_cp], [ 26.963923] [drm:drm_lastclose], driver lastclose completed [ 26.963927] [drm:drm_lastclose], lastclose completed [ 26.963963] [drm:drm_stub_open], [ 26.963966] [drm:drm_open_helper], pid = 1576, minor = 0 [ 26.963970] [drm:radeon_driver_open], [ 26.963974] [drm:drm_addmap_core], offset = 0x00000000, size = 0x00010000, type = 2 [ 26.964005] [drm:drm_addmap_core], 65536 16 a000000203800000 [ 26.964010] [drm:drm_addmap_core], offset = 0xd0000000, size = 0x08000000, type = 0 [ 26.964016] [drm:drm_setup], [ 26.964029] [drm:drm_ioctl], pid=1576, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1 [ 26.964036] [drm:drm_ioctl], pid=1576, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1 [ 26.964044] [drm:drm_release], open_count = 1 [ 26.964048] [drm:drm_release], pid = 1576, device = 0xe200, open_count = 1 [ 26.964056] [drm:drm_lastclose], [ 26.964060] [drm:radeon_do_cleanup_cp], [ 26.964063] [drm:drm_lastclose], driver lastclose completed [ 26.964067] [drm:drm_lastclose], lastclose completed [ 26.964095] [drm:drm_stub_open], [ 26.964098] [drm:drm_open_helper], pid = 1576, minor = 0 [ 26.964102] [drm:radeon_driver_open], [ 26.964106] [drm:drm_addmap_core], offset = 0x00000000, size = 0x00010000, type = 2 [ 26.964136] [drm:drm_addmap_core], 65536 16 a000000203900000 [ 26.964141] [drm:drm_addmap_core], offset = 0xd0000000, size = 0x08000000, type = 0 [ 26.964147] [drm:drm_setup], [ 26.964167] [drm:drm_ioctl], pid=1576, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1 [ 26.964175] [drm:drm_ioctl], pid=1576, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1 [ 26.964181] [drm:drm_ioctl], pid=1576, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1 [ 26.964199] [drm:drm_ioctl], pid=1576, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1 [ 26.964217] [drm:drm_ioctl], pid=1576, cmd=0xc0286415, nr=0x15, dev 0xe200, auth=1 [ 26.964223] [drm:drm_addmap_core], offset = 0x00000000, size = 0x00010000, type = 2 [ 26.964241] [drm:drm_mmap_locked], start = 0x200000000d500000, end = 0x200000000d510000, page offset = 0x3dc0 [ 26.964247] [drm:drm_mmap_locked] *ERROR* Could not find map [ 26.964271] [drm:drm_ioctl], pid=1576, cmd=0x4028641b, nr=0x1b, dev 0xe200, auth=1 [ 26.964277] [drm:drm_ioctl], ret = ffffffea [ 26.964291] [drm:drm_release], open_count = 1 [ 26.964294] [drm:drm_release], pid = 1576, device = 0xe200, open_count = 1 [ 26.964302] [drm:drm_lastclose], [ 26.964307] [drm:radeon_do_cleanup_cp], [ 26.964310] [drm:drm_lastclose], driver lastclose completed [ 26.964314] [drm:drm_lastclose], lastclose completed Émeric -- To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
![]() |