> Thanks a lot for testing these patches!
You did the hard part of the work. So thanks a lot to you!
> Can you try the debug patch below, and respond with the entire dmesg
> log and the output of "lspci -vv"?
Sure. Please find below the entire dmesg log with drm.debug=1 (BTW, is
this the right way to post such a huge output to the list?):
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.33-rc3 (root@longspeak) (gcc version
4.3.4 (Debian 4.3.4-6) ) #2 SMP Fri Jan 8 20:36:36 CET 2010
[ 0.000000] EFI v1.10 by HP: SALsystab=0x3fb38000 ACPI
2.0=0x3fb2e000 SMBIOS=0x3fb3a000 HCDP=0x3fb2c000
[ 0.000000] booting generic kernel on platform hpzx1
[ 0.000000] PCDP: v0 at 0x3fb2c000
[ 0.000000] ACPI: RSDP 000000003fb2e000 00028 (v02 HP)
[ 0.000000] ACPI: XSDT 000000003fb2e02c 00094 (v01 HP zx6000
00000000 HP 00000000)
[ 0.000000] ACPI: FACP 000000003fb36800 000F4 (v03 HP zx6000
00000000 HP 00000000)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe0Block:
32/16 (20091214/tbfadt-526)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block:
32/16 (20091214/tbfadt-526)
[ 0.000000] ACPI: DSDT 000000003fb2e0e0 05781 (v01 HP zx6000
00000007 INTL 02012044)
[ 0.000000] ACPI: FACS 000000003fb368f8 00040
[ 0.000000] ACPI: SPCR 000000003fb36938 00050 (v01 HP zx6000
00000000 HP 00000000)
[ 0.000000] ACPI: DBGP 000000003fb36988 00034 (v01 HP zx6000
00000000 HP 00000000)
[ 0.000000] ACPI: APIC 000000003fb36a48 000B0 (v01 HP zx6000
00000000 HP 00000000)
[ 0.000000] ACPI: SPMI 000000003fb369c0 00050 (v04 HP zx6000
00000000 HP 00000000)
[ 0.000000] ACPI: CPEP 000000003fb36a10 00034 (v01 HP zx6000
00000000 HP 00000000)
[ 0.000000] ACPI: SSDT 000000003fb33870 001D6 (v01 HP zx6000
00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb33a50 00342 (v01 HP zx6000
00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb33da0 00A16 (v01 HP zx6000
00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb347c0 00A16 (v01 HP zx6000
00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb351e0 00A16 (v01 HP zx6000
00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb35c00 00A16 (v01 HP zx6000
00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb36620 000EB (v01 HP zx6000
00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb36710 000EF (v01 HP zx6000
00000006 INTL 02012044)
[ 0.000000] ACPI: Local APIC address c0000000fee00000
[ 0.000000] 2 CPUs available, 2 CPUs total
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] Initial ramdisk at: 0xe0000040fe247000 (13942829 bytes)
[ 0.000000] SAL 3.1: HP version 2.31
[ 0.000000] SAL Platform features: None
[ 0.000000] SAL: AP wakeup using external interrupt vector 0xff
[ 0.000000] ACPI: Local APIC address c0000000fee00000
[ 0.000000] GSI 36 (level, low) -> CPU 0 (0x0000) vector 49
[ 0.000000] MCA related initialization done
[ 0.000000] Virtual mem_map starts at 0xa0007fffc7200000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000400 -> 0x00040000
[ 0.000000] Normal 0x00040000 -> 0x01040000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000400 -> 0x0000fd79
[ 0.000000] 0: 0x0000fec0 -> 0x0000fecb
[ 0.000000] 0: 0x00040000 -> 0x00060000
[ 0.000000] 0: 0x01010000 -> 0x0103ff5a
[ 0.000000] 0: 0x0103ff69 -> 0x0103ff84
[ 0.000000] 0: 0x0103ffa0 -> 0x0103fff0
[ 0.000000] On node 0 totalpages: 391497
[ 0.000000] free_area_init_node: node 0, pgdat e000000001300000,
node_mem_map a0007fffc720e000
[ 0.000000] DMA zone: 893 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 62983 pages, LIFO batch:7
[ 0.000000] Normal zone: 57344 pages used for memmap
[ 0.000000] Normal zone: 270277 pages, LIFO batch:7
[ 0.000000] pcpu-alloc: s30104 r8192 d27240 u65536 alloc=4*16384
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 333260
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=scsi1:/EFI/debian/vmlinuz root=/dev/sdb2 drm.debug=1 ro
[ 0.000000] PID hash table entries: 4096 (order: 1, 32768 bytes)
[ 0.000000] Memory: 6213952k/6238512k available (7026k code, 50000k
reserved, 3489k data, 848k init)
[ 0.000000] SLUB: Genslabs=16, HWalign=128, Order=0-3,
MinObjects=0, CPUs=2, Nodes=256
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1024
[ 0.000000] CPU 0: base freq=200.000MHz, ITC ratio=15/2, ITC
freq=1500.000MHz+/-750ppm
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.004000] Calibrating delay loop... 2244.60 BogoMIPS (lpj=4489216)
[ 0.100064] Security Framework initialized
[ 0.100102] SELinux: Disabled at boot.
[ 0.100431] Dentry cache hash table entries: 1048576 (order: 9,
8388608 bytes)
[ 0.107592] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes)
[ 0.111522] Mount-cache hash table entries: 1024
[ 0.111846] Initializing cgroup subsys ns
[ 0.111882] Initializing cgroup subsys cpuacct
[ 0.111918] Initializing cgroup subsys devices
[ 0.111952] Initializing cgroup subsys freezer
[ 0.111985] Initializing cgroup subsys net_cls
[ 0.112038] ACPI: Core revision 20091214
[ 0.114976] Boot processor id 0x0/0x0
[ 0.000000] Fixed BSP b0 value from CPU 1
[ 0.000000] CPU 1: synchronized ITC with CPU 0 (last diff -31
cycles, maxerr 669 cycles)
[ 0.000000] CPU 1: base freq=200.000MHz, ITC ratio=15/2, ITC
freq=1500.000MHz+/-750ppm
[ 0.117290] Brought up 2 CPUs
[ 0.117323] Total of 2 processors activated (4489.21 BogoMIPS).
[ 0.118333] DMI 2.3 present.
[ 0.118508] regulator: core version 0.5
[ 0.118596] NET: Registered protocol family 16
[ 0.118747] ACPI: bus type pci registered
[ 0.119369] bio: create slab <bio-0> at 0
[ 0.120244] ACPI: EC: Look up EC in DSDT
[ 0.129192] ACPI: Interpreter enabled
[ 0.129225] ACPI: (supports S0 S5)
[ 0.129297] ACPI: Using IOSAPIC for interrupt routing
[ 0.268376] ACPI: No dock devices found.
[ 0.281600] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.307993] pci_root HWP0002:00: host bridge window [io 0x0000-0x03af]
[ 0.308006] pci_root HWP0002:00: host bridge window [io 0x03e0-0x1fff]
[ 0.308042] pci_root HWP0002:00: host bridge window [mem
0x80000000-0x8fffffff]
[ 0.308089] pci_root HWP0002:00: host bridge window [mem
0x80004000000-0x80103fffffe]
[ 0.308730] pci 0000:00:01.0: reg 10: [mem 0x80023000-0x80023fff]
[ 0.309898] pci 0000:00:01.0: supports D1 D2
[ 0.309902] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.309966] pci 0000:00:01.0: PME# disabled
[ 0.310612] pci 0000:00:01.1: reg 10: [mem 0x80022000-0x80022fff]
[ 0.311771] pci 0000:00:01.1: supports D1 D2
[ 0.311774] pci 0000:00:01.1: PME# supported from D0 D1 D2 D3hot
[ 0.311838] pci 0000:00:01.1: PME# disabled
[ 0.312493] pci 0000:00:01.2: reg 10: [mem 0x80021000-0x800210ff]
[ 0.313652] pci 0000:00:01.2: supports D1 D2
[ 0.313655] pci 0000:00:01.2: PME# supported from D0 D1 D2 D3hot
[ 0.313719] pci 0000:00:01.2: PME# disabled
[ 0.314515] pci 0000:00:02.0: reg 10: [io 0x0d58-0x0d5f]
[ 0.314641] pci 0000:00:02.0: reg 14: [io 0x0d64-0x0d67]
[ 0.314766] pci 0000:00:02.0: reg 18: [io 0x0d50-0x0d57]
[ 0.314892] pci 0000:00:02.0: reg 1c: [io 0x0d60-0x0d63]
[ 0.315017] pci 0000:00:02.0: reg 20: [io 0x0d40-0x0d4f]
[ 0.315718] pci 0000:00:02.0: supports D1 D2
[ 0.316372] pci 0000:00:03.0: reg 10: [mem 0x80020000-0x80020fff]
[ 0.316497] pci 0000:00:03.0: reg 14: [io 0x0d00-0x0d3f]
[ 0.316626] pci 0000:00:03.0: reg 18: [mem 0x80000000-0x8001ffff]
[ 0.317541] pci 0000:00:03.0: supports D1 D2
[ 0.317544] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.317609] pci 0000:00:03.0: PME# disabled
[ 0.318595] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI0._PRT]
[ 0.335764] ACPI: PCI Root Bridge [PCI1] (0000:20)
[ 0.366420] pci_root HWP0002:01: host bridge window [mem
0xff5e0000-0xff5e0007]
[ 0.366467] pci_root HWP0002:01: host bridge window [mem
0xff5e2000-0xff5e2007]
[ 0.366516] pci_root HWP0002:01: host bridge window [io 0x2000-0x2fff]
[ 0.366552] pci_root HWP0002:01: host bridge window [mem
0x90000000-0x97ffffff]
[ 0.366599] pci_root HWP0002:01: host bridge window [mem
0x90004000000-0x90103fffffe]
[ 0.367464] pci 0000:20:01.0: reg 10: [io 0x2100-0x21ff]
[ 0.367757] pci 0000:20:01.0: reg 14: [mem 0x90840000-0x9084ffff 64bit]
[ 0.368041] pci 0000:20:01.0: reg 1c: [mem 0x90830000-0x9083ffff 64bit]
[ 0.368334] pci 0000:20:01.0: reg 30: [mem 0x90400000-0x907fffff pref]
[ 0.368986] pci 0000:20:01.0: supports D1 D2
[ 0.369965] pci 0000:20:01.1: reg 10: [io 0x2000-0x20ff]
[ 0.370258] pci 0000:20:01.1: reg 14: [mem 0x90820000-0x9082ffff 64bit]
[ 0.370551] pci 0000:20:01.1: reg 1c: [mem 0x90810000-0x9081ffff 64bit]
[ 0.370844] pci 0000:20:01.1: reg 30: [mem 0x90000000-0x903fffff pref]
[ 0.371496] pci 0000:20:01.1: supports D1 D2
[ 0.372907] pci 0000:20:02.0: reg 10: [mem 0x90800000-0x9080ffff 64bit]
[ 0.374390] pci 0000:20:02.0: PME# supported from D3hot D3cold
[ 0.374466] pci 0000:20:02.0: PME# disabled
[ 0.375777] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI1._PRT]
[ 0.397181] ACPI: PCI Root Bridge [PCI2] (0000:40)
[ 0.421308] pci_root HWP0002:02: host bridge window [io 0x3000-0x5fff]
[ 0.421345] pci_root HWP0002:02: host bridge window [mem
0x98000000-0xafffffff]
[ 0.421392] pci_root HWP0002:02: host bridge window [mem
0xa0004000000-0xa0103fffffe]
[ 0.422251] pci 0000:40:01.0: reg 10: [io 0x3000-0x307f]
[ 0.423899] pci 0000:40:01.0: supports D2
[ 0.424743] pci 0000:40:01.1: reg 10: [io 0x3080-0x308f]
[ 0.426390] pci 0000:40:01.1: supports D1
[ 0.426393] pci 0000:40:01.1: PME# supported from D1 D3hot
[ 0.426483] pci 0000:40:01.1: PME# disabled
[ 0.428222] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI2._PRT]
[ 0.483315] ACPI: PCI Root Bridge [PCI3] (0000:60)
[ 0.507399] pci_root HWP0002:03: host bridge window [io 0x6000-0x7fff]
[ 0.507436] pci_root HWP0002:03: host bridge window [mem
0xb0000000-0xc7ffffff]
[ 0.507482] pci_root HWP0002:03: host bridge window [mem
0xb0004000000-0xb0103fffffe]
[ 0.509080] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI3._PRT]
[ 0.531267] ACPI: PCI Root Bridge [PCI4] (0000:80)
[ 0.560675] pci_root HWP0003:00: host bridge window [io 0x03b0-0x03df]
[ 0.560713] pci_root HWP0003:00: host bridge window [io 0x8000-0xbfff]
[ 0.560750] pci_root HWP0003:00: host bridge window [mem
0x000a0000-0x000fffff]
[ 0.560796] pci_root HWP0003:00: host bridge window [mem
0xc8000000-0xdfffffff]
[ 0.560843] pci_root HWP0003:00: host bridge window [mem
0xc0004000000-0xc0103fffffe]
[ 0.562081] pci 0000:80:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.562306] pci 0000:80:00.0: reg 14: [io 0x8000-0x80ff]
[ 0.562531] pci 0000:80:00.0: reg 18: [mem 0xd8030000-0xd803ffff]
[ 0.563418] pci 0000:80:00.0: reg 30: [mem 0xd8000000-0xd801ffff pref]
[ 0.563588] pci 0000:80:00.0: Boot video device
[ 0.564556] pci 0000:80:00.0: supports D1 D2
[ 0.565780] pci 0000:80:00.1: reg 10: [mem 0xc8000000-0xcfffffff pref]
[ 0.566005] pci 0000:80:00.1: reg 14: [mem 0xd8020000-0xd802ffff]
[ 0.567885] pci 0000:80:00.1: supports D1 D2
[ 0.570162] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI4._PRT]
[ 0.624622] ACPI: PCI Root Bridge [PCI6] (0000:c0)
[ 0.648723] pci_root HWP0002:04: host bridge window [io 0xc000-0xdfff]
[ 0.648760] pci_root HWP0002:04: host bridge window [mem
0xe0000000-0xefffffff]
[ 0.648807] pci_root HWP0002:04: host bridge window [mem
0xe0004000000-0xe0103fffffe]
[ 0.650904] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI6._PRT]
[ 0.658462] vgaarb: device added:
PCI:0000:80:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.658511] vgaarb: loaded
[ 0.704884] ioc_init: PAGE_SIZE 16K, iovp_size 16K
[ 0.704919] ioc_iova_init() hpa c0000000fed01000 IOV base
0x40000000 mask 0xffffffffc0000000 (1024MB)
[ 0.705195] ioc_iova_init() IOV page size 16K pdir e000004080e80000
size 80000
[ 0.707381] IOC: reserving 512Mb of IOVA space at 0x60000000 for agpgart
[ 0.707417] put cookie at 0xe000004080ec0000: 0xbadbadc0ffee
[ 0.707453] ioc_resource_init() res_size 0x1000
[ 0.707488] ioc_resource_init() res_map 1000 e000004080e2c000
[ 0.707525] IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
[ 0.757838] Switching to clocksource itc
[ 0.759030] pnp: PnP ACPI init
[ 0.759085] ACPI: bus type pnp registered
[ 0.839788] GSI 34 (edge, high) -> CPU 1 (0x0100) vector 50
[ 0.840839] GSI 35 (edge, high) -> CPU 0 (0x0000) vector 51
[ 0.941055] pnp: PnP ACPI: found 10 devices
[ 0.941087] ACPI: ACPI bus type pnp unregistered
[ 0.941319] NET: Registered protocol family 2
[ 0.941503] IP route cache hash table entries: 262144 (order: 7,
2097152 bytes)
[ 0.942607] TCP established hash table entries: 524288 (order: 9,
8388608 bytes)
[ 0.949802] TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
[ 0.951429] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.951467] TCP reno registered
[ 0.951509] UDP hash table entries: 4096 (order: 3, 131072 bytes)
[ 0.951717] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes)
[ 0.952083] NET: Registered protocol family 1
[ 0.952531] pci 0000:00:03.0: Firmware left e100 interrupts
enabled; disabling
[ 0.952926] PCI: CLS 128 bytes, default 128
[ 0.953016] Unpacking initramfs...
[ 1.430879] Freeing initrd memory: 13600kB freed
[ 1.431195] perfmon: version 2.0 IRQ 238
[ 1.431235] perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4
counters (47 bits)
[ 1.431951] perfmon: added sampling format default_format
[ 1.431986] perfmon_default_smpl: default_format v2.0 registered
[ 1.432161] audit: initializing netlink socket (disabled)
[ 1.432214] type=2000 audit(1262979966.430:1): initialized
[ 1.432758] HugeTLB registered 256 MB page size, pre-allocated 0 pages
[ 1.434543] VFS: Disk quotas dquot_6.5.2
[ 1.434644] Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 1.434823] msgmni has been set to 12163
[ 1.435189] alg: No test for stdrng (krng)
[ 1.435296] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 1.435345] io scheduler noop registered
[ 1.435377] io scheduler deadline registered
[ 1.435480] io scheduler cfq registered (default)
[ 1.435739] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.435786] ACPI: Power Button [PWRF]
[ 1.435884] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 1.435930] ACPI: Sleep Button [SLPF]
[ 1.525958] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.525999] ACPI: Thermal Zone [THM0] (27 C)
[ 1.527282] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.527558] 00:04: ttyS0 at MMIO 0xff5e0000 (irq = 50) is a 16550A
[ 1.527690] 00:05: ttyS1 at MMIO 0xff5e2000 (irq = 51) is a 16550A
[ 1.527924] mice: PS/2 mouse device common for all mice
[ 1.528017] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
[ 1.528430] TCP cubic registered
[ 1.528464] NET: Registered protocol family 17
[ 1.528566] registered taskstats version 1
[ 1.533567] rtc-efi rtc-efi: setting system clock to 2010-01-08
19:46:06 UTC (1262979966)
[ 1.533641] Freeing unused kernel memory: 848kB freed
[ 1.751965] usbcore: registered new interface driver usbfs
[ 1.752054] usbcore: registered new interface driver hub
[ 1.752136] usbcore: registered new device driver usb
[ 1.754190] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.759422] GSI 18 (level, low) -> CPU 1 (0x0100) vector 52
[ 1.759467] ehci_hcd 0000:00:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 52
[ 1.759543] ehci_hcd 0000:00:01.2: EHCI Host Controller
[ 1.759612] ehci_hcd 0000:00:01.2: new USB bus registered, assigned
bus number 1
[ 1.781636] SCSI subsystem initialized
[ 1.782372] ehci_hcd 0000:00:01.2: irq 52, io mem 0x80021000
[ 1.785208] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.785245] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.805005] ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 0.95
[ 1.805081] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.805117] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.805163] usb usb1: Product: EHCI Host Controller
[ 1.805196] usb usb1: Manufacturer: Linux 2.6.33-rc3 ehci_hcd
[ 1.805231] usb usb1: SerialNumber: 0000:00:01.2
[ 1.805386] hub 1-0:1.0: USB hub found
[ 1.805428] hub 1-0:1.0: 5 ports detected
[ 1.805646] Uniform Multi-Platform E-IDE driver
[ 1.805692] GSI 20 (level, low) -> CPU 0 (0x0000) vector 53
[ 1.805729] e100 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 53
[ 1.811584] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.824434] tg3.c:v3.105 (December 2, 2009)
[ 1.824671] GSI 29 (level, low) -> CPU 1 (0x0100) vector 54
[ 1.824707] tg3 0000:20:02.0: PCI INT A -> GSI 29 (level, low) -> IRQ 54
[ 1.825939] Fusion MPT base driver 3.04.13
[ 1.825971] Copyright (c) 1999-2008 LSI Corporation
[ 1.837992] Fusion MPT SPI Host driver 3.04.13
[ 1.902968] e100 0000:00:03.0: PME# disabled
[ 1.903318] e100: eth0: e100_probe: addr 0x80020000, irq 53, MAC
addr 00:30:6e:4a:d3:ab
[ 1.903393] cmd64x 0000:00:02.0: IDE controller (0x1095:0x0649 rev 0x02)
[ 1.903568] GSI 21 (level, low) -> CPU 0 (0x0000) vector 55
[ 1.903604] CMD64x_IDE 0000:00:02.0: PCI INT A -> GSI 21 (level,
low) -> IRQ 55
[ 1.903747] cmd64x 0000:00:02.0: IDE port disabled
[ 1.903884] cmd64x 0000:00:02.0: 100% native mode on irq 55
[ 1.903957] ide0: BM-DMA at 0x0d40-0x0d47
[ 1.904027] Probing IDE interface ide0...
[ 2.305571] hda: DV-28E-B, ATAPI CD/DVD-ROM drive
[ 2.977324] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.982899] hda: UDMA/33 mode selected
[ 2.983189] ide0 at 0xd58-0xd5f,0xd66 on irq 55
[ 2.983475] GSI 16 (level, low) -> CPU 1 (0x0100) vector 56
[ 2.983511] ohci_hcd 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 56
[ 2.983581] ohci_hcd 0000:00:01.0: OHCI Host Controller
[ 2.983632] ohci_hcd 0000:00:01.0: new USB bus registered, assigned
bus number 2
[ 2.983695] ohci_hcd 0000:00:01.0: irq 56, io mem 0x80023000
[ 3.203987] eth1: Tigon3 [partno(BCM95700A6) rev 0105]
(PCI:66MHz:64-bit) MAC address 00:30:6e:4a:d2:bd
[ 3.204038] eth1: attached PHY is 5701 (10/100/1000Base-T Ethernet)
(WireSpeed[1])
[ 3.204086] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[ 3.204121] eth1: dma_rwctrl[76ff2d0f] dma_mask[64-bit]
[ 3.204929] GSI 27 (level, low) -> CPU 0 (0x0000) vector 57
[ 3.204965] mptspi 0000:20:01.0: PCI INT A -> GSI 27 (level, low) -> IRQ 57
[ 3.205205] mptbase: ioc0: Initiating bringup
[ 3.551349] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.551386] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.551432] usb usb2: Product: OHCI Host Controller
[ 3.551466] usb usb2: Manufacturer: Linux 2.6.33-rc3 ohci_hcd
[ 3.551500] usb usb2: SerialNumber: 0000:00:01.0
[ 3.551700] hub 2-0:1.0: USB hub found
[ 3.551738] hub 2-0:1.0: 3 ports detected
[ 3.554316] GSI 17 (level, low) -> CPU 1 (0x0100) vector 58
[ 3.554352] ohci_hcd 0000:00:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 58
[ 3.554422] ohci_hcd 0000:00:01.1: OHCI Host Controller
[ 3.554466] ohci_hcd 0000:00:01.1: new USB bus registered, assigned
bus number 3
[ 3.554540] ohci_hcd 0000:00:01.1: irq 58, io mem 0x80022000
[ 3.583979] libata version 3.00 loaded.
[ 3.689304] ioc0: LSI53C1030 B2: Capabilities={Initiator,Target}
[ 4.120147] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.120183] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.120229] usb usb3: Product: OHCI Host Controller
[ 4.120263] usb usb3: Manufacturer: Linux 2.6.33-rc3 ohci_hcd
[ 4.120297] usb usb3: SerialNumber: 0000:00:01.1
[ 4.120483] hub 3-0:1.0: USB hub found
[ 4.120520] hub 3-0:1.0: 2 ports detected
[ 4.128848] ide-cd driver 5.00
[ 4.134843] ide-cd: hda: ATAPI 24X DVD-ROM drive, 256kB Cache
[ 4.134943] Uniform CD-ROM driver Revision: 3.20
[ 4.293269] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 4.371725] scsi0 : ioc0: LSI53C1030 B2, FwRev=01032300h, Ports=1,
MaxQ=255, IRQ=57
[ 4.468320] usb 2-1: New USB device found, idVendor=045e, idProduct=0040
[ 4.468357] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.468393] usb 2-1: Product: Microsoft Wheel Mouse Optical®
[ 4.468428] usb 2-1: Manufacturer: Microsoft
[ 4.483770] usbcore: registered new interface driver hiddev
[ 4.492436] input: Microsoft Microsoft Wheel Mouse Optical® as
/devices/pci0000:00/0000:00:01.0/usb2/2-1/2-1:1.0/input/input2
[ 4.492539] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID
v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on
usb-0000:00:01.0-1/input0
[ 4.492611] usbcore: registered new interface driver usbhid
[ 4.492645] usbhid: USB HID core driver
[ 4.858077] usb 3-1: new low speed USB device using ohci_hcd and address 2
[ 5.008988] GSI 28 (level, low) -> CPU 0 (0x0000) vector 59
[ 5.009024] mptspi 0000:20:01.1: PCI INT B -> GSI 28 (level, low) -> IRQ 59
[ 5.009301] mptbase: ioc1: Initiating bringup
[ 5.027103] usb 3-1: New USB device found, idVendor=03f0, idProduct=0024
[ 5.027140] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.027176] usb 3-1: Product: HP Basic USB Keyboard
[ 5.027209] usb 3-1: Manufacturer: CHICONY
[ 5.039294] input: CHICONY HP Basic USB Keyboard as
/devices/pci0000:00/0000:00:01.1/usb3/3-1/3-1:1.0/input/input3
[ 5.039379] generic-usb 0003:03F0:0024.0002: input,hidraw1: USB HID
v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on
usb-0000:00:01.1-1/input0
[ 5.486081] ioc1: LSI53C1030 B2: Capabilities={Initiator,Target}
[ 6.168599] scsi1 : ioc1: LSI53C1030 B2, FwRev=01032300h, Ports=1,
MaxQ=255, IRQ=59
[ 6.169263] scsi 0:0:0:0: Direct-Access HP 73.4G ST373453LC
HPC5 PQ: 0 ANSI: 3
[ 6.169321] scsi target0:0:0: Beginning Domain Validation
[ 6.828927] scsi target0:0:0: Ending Domain Validation
[ 6.829033] scsi target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU
QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 6.831838] scsi 0:0:1:0: Direct-Access HP 73.4G ST373453LC
HPC5 PQ: 0 ANSI: 3
[ 6.831889] scsi target0:0:1: Beginning Domain Validation
[ 6.846907] scsi target0:0:1: Ending Domain Validation
[ 6.847010] scsi target0:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU
QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 7.316677] scsi 1:0:2:0: Direct-Access HP 73.4G ST373453LC
HPC5 PQ: 0 ANSI: 3
[ 7.316729] scsi target1:0:2: Beginning Domain Validation
[ 7.331717] scsi target1:0:2: Ending Domain Validation
[ 7.332426] scsi target1:0:2: FAST-160 WIDE SCSI 320.0 MB/s DT IU
QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 10.108993] sd 0:0:0:0: [sda] 143374738 512-byte logical blocks:
(73.4 GB/68.3 GiB)
[ 10.109067] sd 0:0:1:0: [sdb] 143374738 512-byte logical blocks:
(73.4 GB/68.3 GiB)
[ 10.110322] sd 0:0:0:0: [sda] Write Protect is off
[ 10.110356] sd 0:0:0:0: [sda] Mode Sense: d3 00 10 08
[ 10.110374] sd 0:0:1:0: [sdb] Write Protect is off
[ 10.110408] sd 0:0:1:0: [sdb] Mode Sense: d3 00 10 08
[ 10.111931] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 10.112040] sd 0:0:1:0: [sdb] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 10.115421] sda:
[ 10.115523] sdb: sda1 sda2 sda3
[ 10.139924] sdb1 sdb2 sdb3
[ 10.143754] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 10.144146] sd 0:0:0:0: [sda] Attached SCSI disk
[ 10.335779] sd 1:0:2:0: [sdc] 143374738 512-byte logical blocks:
(73.4 GB/68.3 GiB)
[ 10.337286] sd 1:0:2:0: [sdc] Write Protect is off
[ 10.337321] sd 1:0:2:0: [sdc] Mode Sense: d3 00 10 08
[ 10.338905] sd 1:0:2:0: [sdc] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 10.342342] sdc: sdc1 sdc2 sdc3
[ 10.370285] sd 1:0:2:0: [sdc] Attached SCSI disk
[ 10.555814] EXT4-fs (sdb2): mounted filesystem with ordered data mode
[ 11.891231] udev: starting version 149
[ 12.306131] gameport: FM801 is pci0000:40:01.1/gameport0, io
0x3080, speed 876kHz
[ 12.838590] Linux video capture interface: v2.00
[ 13.371189] GSI 38 (level, low) -> CPU 1 (0x0100) vector 60
[ 13.371246] FM801 0000:40:01.0: PCI INT A -> GSI 38 (level, low) -> IRQ 60
[ 13.737422] Adding 2000768k swap on /dev/sdb3. Priority:-1
extents:1 across:2000768k
[ 13.930385] Linux agpgart interface v0.103
[ 14.036636] agpgart: HP ZX1 IOC: IOPDIR shared with sba_iommu
[ 14.036674] GART at 0xe000004080ec0000
[ 14.036706] read cookie at 0xe000004080ec0000: 0xbadbadc0ffee
[ 14.037359] (null): AGP aperture is 512M @ 0x60000000
[ 14.037394] agpgart: HP ZX1 IOC: IOPDIR shared with sba_iommu
[ 14.037429] GART at 0xe000004080ec0000
[ 14.037460] read cookie at 0xe000004080ec0000: 0x0
[ 14.037492] agpgart: No reserved IO PDIR entry found; GART disabled
[ 15.240421] fuse init (API version 7.13)
[ 17.233719] NET: Registered protocol family 10
[ 17.234377] lo: Disabled Privacy Extensions
[ 17.235267] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 17.727728] tg3: eth1: Link is up at 10 Mbps, half duplex.
[ 17.727780] tg3: eth1: Flow control is off for TX and off for RX.
[ 17.731467] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 18.171995] lp: driver loaded but no devices found
[ 18.178499] ppdev: user-space parallel port driver
[ 20.167832] GSI 60 (level, low) -> CPU 0 (0x0000) vector 61
[ 20.167840] pci 0000:80:00.0: PCI INT A -> GSI 60 (level, low) -> IRQ 61
[ 26.289194] [drm] Initialized drm 1.1.0 20060810
[ 26.605406] [drm] radeon defaulting to userspace modesetting.
[ 26.605413] [drm:drm_init],
[ 26.605616] [drm:drm_get_dev],
[ 26.605885] [drm:drm_get_minor],
[ 26.606047] [drm:drm_get_minor], new minor assigned 0
[ 26.606222] [drm:drm_addmap_core], offset = 0xd8030000, size =
0x00010000, type = 1
[ 26.606233] [drm:radeon_driver_load], AGP card detected
[ 26.606238] [drm] Initialized radeon 1.31.0 20080528 for
0000:80:00.0 on minor 0
[ 26.606905] [drm:drm_stub_open],
[ 26.606910] [drm:drm_open_helper], pid = 1592, minor = 0
[ 26.606915] [drm:radeon_driver_open],
[ 26.606921] [drm:drm_addmap_core], offset = 0x00000000, size =
0x00010000, type = 2
[ 26.606952] [drm:drm_addmap_core], 65536 16 a000000203600000
[ 26.606959] [drm:drm_addmap_core], offset = 0xd0000000, size =
0x08000000, type = 0
[ 26.606966] [drm:drm_setup],
[ 26.607027] [drm:drm_ioctl], pid=1592, cmd=0xc0106407, nr=0x07, dev
0xe200, auth=1
[ 26.607041] [drm:drm_ioctl], pid=1592, cmd=0xc0106401, nr=0x01, dev
0xe200, auth=1
[ 26.607052] [drm:drm_ioctl], pid=1592, cmd=0xc0106401, nr=0x01, dev
0xe200, auth=1
[ 26.607095] [drm:drm_ioctl], pid=1592, cmd=0xc0406400, nr=0x00, dev
0xe200, auth=1
[ 26.607102] [drm:drm_ioctl], pid=1592, cmd=0xc0406400, nr=0x00, dev
0xe200, auth=1
[ 26.607195] [drm:drm_release], open_count = 1
[ 26.607198] [drm:drm_release], pid = 1592, device = 0xe200, open_count = 1
[ 26.607210] [drm:drm_lastclose],
[ 26.607215] [drm:radeon_do_cleanup_cp],
[ 26.607218] [drm:drm_lastclose], driver lastclose completed
[ 26.607224] [drm:drm_lastclose], lastclose completed
[ 26.912021] [drm:drm_stub_open],
[ 26.912024] [drm:drm_open_helper], pid = 1592, minor = 0
[ 26.912029] [drm:radeon_driver_open],
[ 26.912033] [drm:drm_addmap_core], offset = 0x00000000, size =
0x00010000, type = 2
[ 26.912066] [drm:drm_addmap_core], 65536 16 a000000203700000
[ 26.912072] [drm:drm_addmap_core], offset = 0xd0000000, size =
0x08000000, type = 0
[ 26.912078] [drm:drm_setup],
[ 26.912096] [drm:drm_ioctl], pid=1592, cmd=0xc0406400, nr=0x00, dev
0xe200, auth=1
[ 26.912104] [drm:drm_ioctl], pid=1592, cmd=0xc0406400, nr=0x00, dev
0xe200, auth=1
[ 26.912115] [drm:drm_release], open_count = 1
[ 26.912118] [drm:drm_release], pid = 1592, device = 0xe200, open_count = 1
[ 26.912127] [drm:drm_lastclose],
[ 26.912132] [drm:radeon_do_cleanup_cp],
[ 26.912134] [drm:drm_lastclose], driver lastclose completed
[ 26.912139] [drm:drm_lastclose], lastclose completed
[ 26.912174] [drm:drm_stub_open],
[ 26.912177] [drm:drm_open_helper], pid = 1592, minor = 0
[ 26.912182] [drm:radeon_driver_open],
[ 26.912185] [drm:drm_addmap_core], offset = 0x00000000, size =
0x00010000, type = 2
[ 26.912216] [drm:drm_addmap_core], 65536 16 a000000203800000
[ 26.912221] [drm:drm_addmap_core], offset = 0xd0000000, size =
0x08000000, type = 0
[ 26.912227] [drm:drm_setup],
[ 26.912241] [drm:drm_ioctl], pid=1592, cmd=0xc0406400, nr=0x00, dev
0xe200, auth=1
[ 26.912247] [drm:drm_ioctl], pid=1592, cmd=0xc0406400, nr=0x00, dev
0xe200, auth=1
[ 26.912256] [drm:drm_release], open_count = 1
[ 26.912259] [drm:drm_release], pid = 1592, device = 0xe200, open_count = 1
[ 26.912267] [drm:drm_lastclose],
[ 26.912271] [drm:radeon_do_cleanup_cp],
[ 26.912274] [drm:drm_lastclose], driver lastclose completed
[ 26.912278] [drm:drm_lastclose], lastclose completed
[ 26.912306] [drm:drm_stub_open],
[ 26.912309] [drm:drm_open_helper], pid = 1592, minor = 0
[ 26.912313] [drm:radeon_driver_open],
[ 26.912317] [drm:drm_addmap_core], offset = 0x00000000, size =
0x00010000, type = 2
[ 26.912347] [drm:drm_addmap_core], 65536 16 a000000203900000
[ 26.912352] [drm:drm_addmap_core], offset = 0xd0000000, size =
0x08000000, type = 0
[ 26.912358] [drm:drm_setup],
[ 26.912378] [drm:drm_ioctl], pid=1592, cmd=0xc0106407, nr=0x07, dev
0xe200, auth=1
[ 26.912386] [drm:drm_ioctl], pid=1592, cmd=0xc0106401, nr=0x01, dev
0xe200, auth=1
[ 26.912392] [drm:drm_ioctl], pid=1592, cmd=0xc0106401, nr=0x01, dev
0xe200, auth=1
[ 26.912410] [drm:drm_ioctl], pid=1592, cmd=0xc0106407, nr=0x07, dev
0xe200, auth=1
[ 26.912428] [drm:drm_ioctl], pid=1592, cmd=0xc0286415, nr=0x15, dev
0xe200, auth=1
[ 26.912434] [drm:drm_addmap_core], offset = 0x00000000, size =
0x00010000, type = 2
[ 26.912452] [drm:drm_mmap_locked], start = 0x200000000d500000, end
= 0x200000000d510000, page offset = 0x3dc0
[ 26.912458] [drm:drm_mmap_locked] *ERROR* Could not find map
[ 26.912482] [drm:drm_ioctl], pid=1592, cmd=0x4028641b, nr=0x1b, dev
0xe200, auth=1
[ 26.912488] [drm:drm_ioctl], ret = ffffffea
[ 26.912503] [drm:drm_release], open_count = 1
[ 26.912506] [drm:drm_release], pid = 1592, device = 0xe200, open_count = 1
[ 26.912515] [drm:drm_lastclose],
[ 26.912519] [drm:radeon_do_cleanup_cp],
[ 26.912522] [drm:drm_lastclose], driver lastclose completed
[ 26.912526] [drm:drm_lastclose], lastclose completed
[ 28.106133] eth1: no IPv6 routers present
And please find below the output of lspci -vv:
00:01.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (250ns min, 10500ns max), Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 56
Region 0: Memory at 80023000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00:01.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (250ns min, 10500ns max), Cache Line Size: 128 bytes
Interrupt: pin B routed to IRQ 58
Region 0: Memory at 80022000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00:01.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20 [EHCI])
Subsystem: NEC Corporation USB 2.0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (4000ns min, 8500ns max), Cache Line Size: 128 bytes
Interrupt: pin C routed to IRQ 52
Region 0: Memory at 80021000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
00:02.0 IDE interface: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI
to ATA Host Controller (rev 02) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to ATA Host
Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 55
Region 0: I/O ports at 0d58 [size=8]
Region 1: I/O ports at 0d64 [size=4]
Region 2: I/O ports at 0d50 [size=8]
Region 3: I/O ports at 0d60 [size=4]
Region 4: I/O ports at 0d40 [size=16]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=3 PME-
Kernel driver in use: CMD64x_IDE
00:03.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet
Pro 100 (rev 0d)
Subsystem: Hewlett-Packard Company Device 1274
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (2000ns min, 14000ns max)
Interrupt: pin A routed to IRQ 53
Region 0: Memory at 80020000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 0d00 [size=64]
Region 2: Memory at 80000000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: e100
20:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030
PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
Subsystem: LSI Logic / Symbios Logic Device 1000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 192 (4250ns min, 4500ns max), Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 57
Region 0: I/O ports at 2100 [size=256]
Region 1: Memory at 90840000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at 90830000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at 90400000 [disabled] [size=4M]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: mptspi
20:01.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030
PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
Subsystem: LSI Logic / Symbios Logic Device 1000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 192 (4250ns min, 4500ns max), Cache Line Size: 128 bytes
Interrupt: pin B routed to IRQ 59
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at 90820000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at 90810000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at 90000000 [disabled] [size=4M]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: mptspi
20:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701
Gigabit Ethernet (rev 15)
Subsystem: Hewlett-Packard Company Core Lan 1000Base-T
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 192 (16000ns min), Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 54
Region 0: Memory at 90800000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512
DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Broadcom NetXtreme Gigabit Ethernet Controller
Read-only fields:
[PN] Part number: BCM95700A6
[EC] Engineering changes: 106679-15
[SN] Serial number: 0123456789
[MN] Manufacture ID: 31 34 65 34
[RV] Reserved: checksum bad, 26 byte(s) reserved
Read/write fields:
[YA] Asset tag: XYZ01234567
[RW] Read-write area: 107 byte(s) free
End
Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 189721380f6b5204 Data: 1ba0
Kernel driver in use: tg3
40:01.0 Multimedia audio controller: Fortemedia, Inc Xwave QS3000A
[FM801] (rev b2)
Subsystem: Fortemedia, Inc FM801 PCI Audio
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (1000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 60
Region 0: I/O ports at 3000 [size=128]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: FM801
40:01.1 Input device controller: Fortemedia, Inc Xwave QS3000A [FM801
game port] (rev b2)
Subsystem: Fortemedia, Inc FM801 PCI Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (1000ns min, 10000ns max)
Region 0: I/O ports at 3080 [size=16]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1+,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: FM801_gameport
80:00.0 VGA compatible controller: ATI Technologies Inc Radeon R300 NG
[FireGL X1] (rev 80) (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Device 0152
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 192 (2000ns min), Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 61
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 8000 [size=256]
Region 2: Memory at d8030000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at d8000000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit-
FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
80:00.1 Display controller: ATI Technologies Inc Radeon R300 [FireGL
X1] (Secondary) (rev 80)
Subsystem: ATI Technologies Inc Device 0153
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 192 (2000ns min), Cache Line Size: 128 bytes
Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at d8020000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Thank you for your time.
Émeric
--
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
|