> Yes, your patch in isolation (having reverted Peter's > c1955a3d4762e7a9bf84035eb3c4886a900f0d15) allows this box to boot > 2.6.27-rc3 with CONFIG_PRINTK_TIME=y. As you noted, I did see some > oddities in the printk timings, where the values would go up then back > down, but nothing further out of the ordinary. Good. Thanks a lot for testing. > P.S. Should I start a separate thread on the messages I mentioned > earlier (but only in passing)? > > [ 32.593534] kernel unaligned access to 0xe000000644220466, ip=0xa000000100516fa1 Separate thread sounds like a good idea. You should decode the ip=value to which routine was running. Look at System.map to get the routine name, or use "objdump -d" to disassamble your vmlinux to find the exact instruction (but note that the kernel indicates the instruction in the bundle with a low order digit of 0, 1, 2 whereas the objdump disassembly uses 0, 6, c). -Tony -- To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html