Is anyone out there successfully using the ACPI processor driver and CPU hotplug? I've been playing with it for the past few days, and it *almost* works on my platform (ia64), but not quite. I can offline/online a CPU successfully via the sysfs interface. It's when I try and add ACPI into the mix that stuff starts going wonky. My understanding of reading the code and the stuff in Documentation/cpu-hotplug.txt is that what should be happening is this: - firmware sends ACPI_NOTIFY_BUS_CHECK or ACPI_NOTIFY_EJECT_REQUEST events to acpi_processor_hotplug_notify. - if we got an eject request, simply emit a cpu offline uevent and let a udev script do the right thing (in this case, echo 0 > /sys/devices/system/cpu/cpuX/online) - if we got a bus/device check, it gets a little hairier, since the notify handler seems like it's going to toggle the state of the cpu. - first, try to find the cpu on the bus. If it does not exist, then call acpi_processor_device_add and we're done (after emitting a cpu online uevent) - else, we've found the cpu on the bus, so then check to see if its id is in the range of acceptable values. If so, we assume that it's online, and that we want to offline it, so emit a cpu offline uevent - if cpu is on the bus, but id is outside range of acceptable values, then call acpi_processor_start and emit a cpu online uevent Where I'm running into difficulty is in the bus/device check logic if the CPU has already been offlined via sysfs. For some reason, the call to acpi_bus_get_device() succeeds, so the "toggle" logic inside acpi_processor_hotplug_notify() thinks that we want to offline the CPU, rather than onlining it. We keep emitting cpu offline uevents, but really, we should be emitting cpu online uevents. So something seems off, and at this point, the possibilities I can see are: - at some point during the sysfs offline process (cpu_down and friends), platform code should have removed the ACPI CPU device from the bus - the toggle logic inside acpi_processor_hotplug_notify is broken, and the call to acpi_bus_get_device is bogus Anyone have any hints? Anyone using this successfully? Poking around in the x86/ tree wasn't very informative for me. Thanks. /ac - To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
![]() |