On Wed, Aug 29, 2007 at 01:53:53PM -0500, Brent Casavant wrote: > On Wed, 29 Aug 2007, Nick Piggin wrote: > > > On Tue, Aug 28, 2007 at 03:56:28PM -0500, Brent Casavant wrote: > > > > The simplistic method to solve this is a lock around the section > > > issuing IOs, thereby ensuring serialization of access to the IO > > > device. However, as SN2 does not enforce an ordering between normal > > > memory transactions and memory-mapped IO transactions, you cannot > > > be sure that an IO transaction will arrive at the IO fabric "on the > > > correct side" of the unlock memory transaction using this scheme. > > > > Hmm. So what if you had the following code executed by a single CPU: > > > > writel(data, ioaddr); > > wmb(); > > *mem = 10; > > > > Will the device see the io write before the store to mem? > > Not necessarily. There is no guaranteed ordering between the IO write > arriving at the device and the order of the normal memory reference, > regardless of the intervening wmb(), at least on SN2. I believe the > missing component in the mental model is the effect of the platform > chipset. > > Perhaps this will help. Uncached writes (i.e. IO writes) are posted > to the SN2 SHub ASIC and placed in their own queue which the SHub chip > then routes to the appropriate target. This uncached write queue is > independent of the NUMA cache-coherency maintained by the SHub ASIC > for system memory; the relative order in which the uncached writes > and the system memory traffic appear at their respective targets is > undefined with respect to eachother. > > wmb() does not address this situation as it only guarantees that > the writes issued from the CPU have been posted to the chipset, > not that the chipset itself has posted the write to the final > destination. mmiowb() guarantees that all outstanding IO writes > have been issued to the IO fabric before proceeding. > > I like to think of it this way (probably not 100% accurate, but it > helps me wrap my brain around this particular point): > > wmb(): Ensures preceding writes have issued from the CPU. > mmiowb(): Ensures preceding IO writes have issued from the > system chipset. > > mmiowb() on SN2 polls a register in SHub that reports the length > of the outstanding uncached write queue. When the queue has emptied, > it is known that all subsequent normal memory writes will therefore > arrive at their destination after all preceding IO writes have arrived > at the IO fabric. > > Thus, typical mmiowb() usage, for SN2's purpose, is to ensure that > all IO traffic from a CPU has made it out to the IO fabric before > issuing the normal memory transactions which release a RAM-based > lock. The lock in this case is the one used to serialize access > to a particular IO device. OK, thanks for that. I think I have a rough idea of how they both work... I was just thinking (hoping) that, although the writel may not reach the device before the store reaches memory, it would _appear_ that way from the POV of the device (ie. if the device were to DMA from mem). But that's probably wishful thinking because the memory might be on some completely different part of the system. I don't know whether this is exactly a correct implementation of Linux's barrier semantics. On one hand, wmb _is_ ordering the stores as they come out of the CPU; on the other, it isn't ordering normal stores with respect to writel from the POV of the device (which is seems to be what is expected by the docs and device driver writers). One argument says that the IO device or chipset is a seperate agent and thus isn't subject to ordering... which is sort of valid, but it is definitely not an agent equal to a CPU, because it can't actively participate in the synchronisation protocol. And on the other side, it just doesn't seem so useful just to know that stores coming out of the CPU are ordered if they can be reordered by an intermediate. Why even have wmb() at all, if it doesn't actually order stores to IO and RAM? powerpc's wmb() could just as well be an 'eieio' if it were to follow your model; that instruction orders IO, but not WRT cacheable stores. So you could argue that the chipset is an extention of the CPU's IO/memory subsystem and should follow the ordering specified by the CPU. I like this idea because it could make things simpler and more regular for the Linux barrier model. I guess it is too expensive for you to have mmiowb() in every wmb(), because _most_ of the time, all that's needed is ordering between IOs. So why not have io_mb(), io_rmb(), io_wmb(), which order IOs but ignore system memory. Then the non-prefixed primitives order everything (to the point that wmb() is like mmiowb on sn2). > > > mmiowb() causes SN2 to drain the pending IOs from the current CPU's > > > node. Once the IOs are drained the CPU can safely unlock a normal > > > memory based lock without fear of the unlock's memory write passing > > > any outstanding IOs from that CPU. > > > > mmiowb needs to have the disclaimer that it's probably wrong if called > > outside a lock, and it's probably wrong if called between two io writes > > (need a regular wmb() in that case). I think some drivers are getting > > this wrong. > > There are situations where mmiowb() can be pressed into service to > some other end, but those are rather rare. The only instance I am > personally familiar with is synchronizing a free-running counter on > a PCI device as closely as possible to the execution of a particular > line of driver code. A write of the new counter value to the device > and subsequent mmiowb() synchronizes that execution point as closely > as practical to the IO write arriving at the device. Not perfect, but > good enough for my purposes. (This was a hack, by the way, pressing > a bit of hardware into a purpose for which it wasn't really designed, > ideally the hardware would have had a better mechanism to accomplish > this goal.) I guess that would be fine. You probably have a slightly better understanding of the issues than the average device driver writer so you could ignore the warnings ;) > But in the normal case, I believe you are 100% correct -- wmb() would > ensure that the memory-mapped IO writes arrive at the chipset in a > particular order, and thus should arrive at the IO hardware in a particular > order. mmiowb() would not necessarily accomplish this goal, and is > incorrectly used wherever that is the intention. At least for SN2. Now I guess it's strictly also needed if you want to ensure cacheable stores and IO stores are visible to the device in the correct order too. I think we'd normally hope wmb() does that for us too (hence all my rambling above). - To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
![]() |