Russ, On Wed, Oct 18, 2006 at 05:38:43PM -0500, Russ Anderson wrote: > > With the existing perfmon v2.0, All the PMU description tables are compiled in. > > > > I think what we could do is to detect we have a mixed (family) configuration > > and drop to the generic (architected) PMU with only 4 counters and 2 events. That > > is, I am afraid, the best we could do. > > Tony's test kernel (plus Jack's patch and my patch) boots on a mixed Montecito > and Madison system. Perfmon runs, though I'm not sure what to look for > to tell if it is not functioning properly. > > Yes, it could work for very simple measurements. The CPU_CYCLES is a good example, though the event on Montecito as a different name (by same encoding). But it gets more tricky as soon as you try accessing PMU registers outside the range of architected registers, i.e., outside PMC4-7/PMD4-7. There there are big differences. Montecito has 12 counters, Madison has 4. All the extended features, such as opcode matching, range restrictions use differnet registers between the 2 models. Perfmon detects the cpu type using cpuid only once during initialization. So it depends on which CPU executes the initialization. The only common set guaranteed to work the same way is PMC4-7/PMD4-7 and events CPU_CYCLES and INSTRUCTION_RETIRED. > --------------------- > saturn2-7:~ # profile.pl --kernel-only -T 10 > profile.pl: found pfmon version 3.0. > profile.pl: run profile for 10 seconds. > profile.pl: no_dplace=1....c_opt=. > profile.pl: Samples/tick defaults to: 13940008 for event CPU_CYCLES. > profile.pl: pfmon command: /usr/bin/pfmon --system-wide --smpl-outfile=/tmp/sample.out.4022 --smpl-entries=100000 -k --short-smpl-periods=13940008 --smpl-module=compact-ia64 --events=CPU_CYCLES --relative -t 10 > profile.pl: Running a timed profile for 10 seconds: > <session to end in 10 seconds> > profile.pl: Profile complete. > profile.pl: Checking the profile results. > profile.pl: Merging sample files into a single file. > profile.pl: my_partition_id=0 makemap_partition_id=0. > profile.pl: Running the profile analyzer. > profile.pl: analyze.pl kernel_only /tmp/sample.out.4022 profile.out --system-map /proc/kallsyms > analyze,pl: Using /proc/kallsyms as the kernel map file. > analyze.pl: Read 13679 symbols from /proc/kallsyms. > analyze.pl: total observations: 1017 > profile.pl: Profile results are in file: profile.out. > profile.pl: Removing the sample files. > profile.pl: Normal exit. > saturn2-7:~ # cat profile.out > user ticks: 0 0 % > kernel ticks: 1017 100 % > idle ticks: 1015 99.8 % > > Using /proc/kallsyms as the kernel map file. > ==================================================================== > Kernel > > Ticks Percent Cumulative Routine > Percent > -------------------------------------------------------------------- > 1015 99.80 99.80 default_idle > 1 0.10 99.90 get_page_from_freelist > 1 0.10 100.00 hrtimer_run_queues > ==================================================================== > > > > -- > Russ Anderson, OS RAS/Partitioning Project Lead > SGI - Silicon Graphics Inc rja@xxxxxxx -- -Stephane - To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
![]() |