>>On Tuesday, September 26, 2006 12:42 am, eiichiro.oiwa.nm@xxxxxxxxxxx >>wrote: >>> To be compatible with Xorg's handling of PCI, we need pci_fixup_video on >>> IA64 platform like x86 platform. There are also machines, which have VGA >>> embedded into main board, among IA64 platform. Embedded VGA generally >>> don't have PCI ROM, and there are VGA ROM image in System BIOS. >>> Therefore, these machines need pci_fixup_video for the sysfs rom. >>> pci_fixup_video already exists in x86 Linux kernel. However since this >>> function doesn't exist in IA64 kernel, we could not run X server on IA64 >>> box has embedded-VGA. >>> >>> I tested pci_fixup_video on IA64 box has embedded-VGA. I confirmed we >>> can read VGA BIOS from the sysfs rom regardless of embedded-VGA. >> >>Looks good, Eiichiro, thanks for posting this. >> >>> +#include <linux/delay.h> >>> +#include <linux/dmi.h> >>> +#include <linux/pci.h> >>> +#include <linux/init.h> >> >>For this version, I don't think you need delay.h or dmi.h. And like Bjorn >>mentioned, this could probably be turned into generic code in drivers/pci >>so we don't have too much duplication with x86 (and like I mentioned, >>x86_64 could probably use this too). >> >>Jesse >> > >"PCI-to-PCI Bridge Architecture Specification" describes how to support VGA. >And pci_fixup_video suits this specification because this function checks the >Bridge Control register. I also think pci_fixup_video should be turned into >generic quirks.c in drivers/pci. > >Ok, I will modify code and test. > >Thanks, >Eiichiro I moved pci_fixup_video to generic location (driver/pci/quirks.c). I tested generic fixup_video on x86, x86_64 and IA64, and confirmed we can read Video BIOS from the sysfs rom with embedded VGA. Eiichiro diff -dupNr linux-2.6.18.orig/arch/i386/pci/fixup.c linux-2.6.18/arch/i386/pci/fixup.c --- linux-2.6.18.orig/arch/i386/pci/fixup.c 2006-09-20 12:42:06.000000000 +0900 +++ linux-2.6.18/arch/i386/pci/fixup.c 2006-09-27 14:18:55.000000000 +0900 @@ -343,51 +343,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_rootport_aspm_quirk ); /* - * Fixup to mark boot BIOS video selected by BIOS before it changes - * - * From information provided by "Jon Smirl" <jonsmirl@xxxxxxxxx> - * - * The standard boot ROM sequence for an x86 machine uses the BIOS - * to select an initial video card for boot display. This boot video - * card will have it's BIOS copied to C0000 in system RAM. - * IORESOURCE_ROM_SHADOW is used to associate the boot video - * card with this copy. On laptops this copy has to be used since - * the main ROM may be compressed or combined with another image. - * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW - * is marked here since the boot video device will be the only enabled - * video device at this point. - */ - -static void __devinit pci_fixup_video(struct pci_dev *pdev) -{ - struct pci_dev *bridge; - struct pci_bus *bus; - u16 config; - - if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA) - return; - - /* Is VGA routed to us? */ - bus = pdev->bus; - while (bus) { - bridge = bus->self; - if (bridge) { - pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, - &config); - if (!(config & PCI_BRIDGE_CTL_VGA)) - return; - } - bus = bus->parent; - } - pci_read_config_word(pdev, PCI_COMMAND, &config); - if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { - pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; - printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev)); - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video); - -/* * Some Toshiba laptops need extra code to enable their TI TSB43AB22/A. * * We pretend to bring them out of full D3 state, and restore the proper diff -dupNr linux-2.6.18.orig/drivers/pci/quirks.c linux-2.6.18/drivers/pci/quirks.c --- linux-2.6.18.orig/drivers/pci/quirks.c 2006-09-20 12:42:06.000000000 +0900 +++ linux-2.6.18/drivers/pci/quirks.c 2006-09-27 14:46:40.000000000 +0900 @@ -1590,6 +1590,51 @@ static void __devinit fixup_rev1_53c810( } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); +/* + * Fixup to mark boot BIOS video selected by BIOS before it changes + * + * From information provided by "Jon Smirl" <jonsmirl@xxxxxxxxx> + * + * The standard boot ROM sequence for an x86 machine uses the BIOS + * to select an initial video card for boot display. This boot video + * card will have it's BIOS copied to C0000 in system RAM. + * IORESOURCE_ROM_SHADOW is used to associate the boot video + * card with this copy. On laptops this copy has to be used since + * the main ROM may be compressed or combined with another image. + * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW + * is marked here since the boot video device will be the only enabled + * video device at this point. + */ + +static void __devinit fixup_video(struct pci_dev *pdev) +{ + struct pci_dev *bridge; + struct pci_bus *bus; + u16 config; + + if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA) + return; + + /* Is VGA routed to us? */ + bus = pdev->bus; + while (bus) { + bridge = bus->self; + if (bridge) { + pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, + &config); + if (!(config & PCI_BRIDGE_CTL_VGA)) + return; + } + bus = bus->parent; + } + pci_read_config_word(pdev, PCI_COMMAND, &config); + if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { + pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; + printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev)); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_video); + static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { - To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
![]() |