Linux Kernel I2C Bus Layer
[Prev Page][Next Page]
- Re: [PATCH 3/3] i2c-piix4: support AMD auxiliary SMBus controller, (continued)
- [PATCH v3] i2c-ali1535: enable SPARC support,
Jean Delvare
- [PATCH] i2c: Fix error value returned by several bus drivers, Jean Delvare
- [PATCH] i2c-ali1535: enable SPARC support,
corentin.labbe
- RFC: I2C bus fault recovery and I2C reset,
David Jander
- [PATCH] i2c-mxs: fix compile warning in mxs_i2c_xfer(),
Shawn Guo
- [PATCH v7 0/5] AT91: replace broken TWI driver i2c-at91.c,
Nikolaus Voss
- [GIT PULL] i2c fixes for Linux 3.2, Jean Delvare
- RE: [PATCH v5 3/4] drivers/i2c/busses/i2c-at91.c: add new driver,
Voss, Nikolaus
- Waiting until probe of i2c driver is done,
Christian Gmeiner
- [PATCH v3] OMAP: I2C: Fix the interrupt clearing in OMAP4,
Shubhrajyoti D
- Still problems wit egt20 i2c driver,
Christian Gmeiner
- Re: [PATCH] i2c-eg20t: modified the setting of transfer rate, Tomoya MORINAGA
- About one i2c failure issue after system reset,
Jason Hui
- [PATCH v2] OMAP: I2C: Fix the interrupt clearing in OMAP4,
Shubhrajyoti D
- [PATCH v2] I2C: Make i2cdev_notifier_call static,
Shubhrajyoti D
- [PATCH v6 0/5] AT91: replace broken TWI driver i2c-at91.c,
Nikolaus Voss
- [PATCH] I2C: Make i2cdev_detach_adapter static,
Shubhrajyoti D
- [PATCH v3] I2C: add CSR SiRFprimaII on-chip I2C controllers driver,
Barry Song
[PATCH] i2c: Delete ANY_I2C_BUS, Jean Delvare
[PATCH] i2c: Fix device name for 10-bit slave address, Jean Delvare
[PATCH] I2C: MIPS: lantiq: add FALC-ON i2c bus master,
John Crispin
[PATCH 0/5] Generalize module_platform_driver,
Lars-Peter Clausen
[PATCH] I2C: OMAP: fix the clearing of interrupts,
Shubhrajyoti D
[PATCH] i2c/designware: dw_i2c_init_driver as subsys initcall,
Pratyush Anand
[PATCH v2] i2c/busses: (mpc) Add support for SMBUS_READ_BLOCK_DATA, Guenter Roeck
[PATCH] i2c: Support for Netlogic XLR/XLS I2C controller., Jayachandran C.
[PATCH V4 00/14] add clk_prepare/clk_unprepare to imx drivers,
Richard Zhao
- [PATCH V4 01/14] clk: add helper functions clk_prepare_enable and clk_disable_unprepare, Richard Zhao
- [PATCH V4 02/14] ARM: mxc: time: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V4 06/14] ARM: mxc: arch_reset: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V4 07/14] ARM: mxc: audmux-v2: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V4 04/14] ARM: mxc: pwm: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V4 05/14] ARM: mxc: epit: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V4 08/14] ARM: pm-imx5: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V4 10/14] ARM: mxs: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V4 14/14] mmc: sdhci-esdhc-imx: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V4 13/14] i2c: imx: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V4 12/14] net: fec: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V4 09/14] ARM: mx31moboard: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V4 11/14] serial: imx: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V4 03/14] ARM: mxc: ahci: add clk_prepare/clk_unprepare, Richard Zhao
- Re: [PATCH V4 00/14] add clk_prepare/clk_unprepare to imx drivers, Richard Zhao
[PATCH] i2c/busses: (mpc) Add support for SMBUS_READ_BLOCK_DATA,
Guenter Roeck
<Possible follow-ups>
[PATCH] i2c/busses: (mpc) Add support for SMBUS_READ_BLOCK_DATA, Yuantian.tang
[PATCH] i2c: reorganize muxes to a standard pattern,
Wolfram Sang
[PATCH V3 00/14] add clk_prepare/clk_unprepare to imx drivers,
Richard Zhao
- [PATCH V3 02/14] ARM: mxc: time: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V3 03/14] ARM: mxc: ahci: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V3 01/14] clk: add helper functions clk_prepare_enable and clk_disable_unprepare, Richard Zhao
- [PATCH V3 08/14] ARM: pm-imx5: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V3 06/14] ARM: mxc: arch_reset: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V3 09/14] ARM: mx31moboard: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V3 11/14] serial: imx: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V3 04/14] ARM: mxc: pwm: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V3 10/14] ARM: mxs: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V3 13/14] i2c: imx: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V3 07/14] ARM: mxc: audmux-v2: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V3 12/14] net: fec: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V3 05/14] ARM: mxc: epit: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V3 14/14] mmc: sdhci-esdhc-imx: add clk_prepare/clk_unprepare, Richard Zhao
[PATCH 0/8] of/MIPS/i2c/net: Convert OCTEON to use device-tree,
ddaney . cavm
[PATCH V2 00/14] add clk_prepare/clk_unprepare to imx drivers,
Richard Zhao
- [PATCH V2 01/14] clk: add helper functions clk_prepare_enable and clk_disable_unprepare, Richard Zhao
- [PATCH V2 02/14] ARM: mxc: time: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V2 06/14] ARM: mxc: arch_reset: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V2 12/14] net: fec: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V2 10/14] ARM: mxs: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V2 07/14] ARM: mxc: audmux-v2: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V2 11/14] serial: imx: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V2 03/14] ARM: mxc: ahci: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V2 09/14] ARM: mx31moboard: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V2 05/14] ARM: mxc: epit: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V2 04/14] ARM: mxc: pwm: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V2 08/14] ARM: pm-imx5: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V2 13/14] i2c: imx: add clk_prepare/clk_unprepare, Richard Zhao
- [PATCH V2 14/14] mmc: sdhci-esdhc-imx: add clk_prepare/clk_unprepare, Richard Zhao
10-bit address support,
Jean Delvare
[PATCH v5 0/4] AT91: replace broken TWI driver i2c-at91.c,
Nikolaus Voss
[PATCH 1/1] i2c: imx: convert clk_prepare/clk_unprepare, Richard Zhao
[PATCH v4 0/4] AT91: replace broken TWI driver i2c-at91.c,
Nikolaus Voss
[PATCH V3 0/4] AT91: replace broken TWI driver i2c-at91.c,
Nikolaus Voss
[PATCH v2] I2C: add CSR SiRFprimaII on-chip I2C controllers driver,
Barry Song
[PATCH v2] omap4: i2c: add post idle reset registers flag,
David Anders
[PATCH] omap4: i2c: add post idle reset registers flag, David Anders
[no subject],
Wayne Tams
RE: [PATCH V2] drivers/i2c/busses/i2c-at91.c: fix brokeness,
Voss, Nikolaus
<Possible follow-ups>
Re: [PATCH V2] drivers/i2c/busses/i2c-at91.c: fix brokeness, Hubert Feurstein
10-bit address support in i2c-omap and i2c-davinci,
Jean Delvare
[PATCH] Generate correct i2c address sequence for 10-bit target.,
Jeffrey (Sheng-Hui) Chu
[PATCH] I2C: add CSR SiRFprimaII on-chip I2C controllers driver,
Barry Song
FW: [PATCH] drivers/i2c/busses/i2c-at91.c: fix brokeness, Voss, Nikolaus
Please pull bjdooks' for-linus/i2c-3.2 branch, Ben Dooks
[GIT PULL] i2c updates for Linux 3.2, Jean Delvare
[PATCH] i2c: remove i2c-intel-mid driver,
Andy Shevchenko
[PATCH 1/2] i2c-eg20t: Support new device LAPIS Semiconductor ML7831 IOH,
Tomoya MORINAGA
[PATCH] rtc-isl1208: Use SMBus functions if I2C isn't available,
Ben Gardner
[PATCH] rtc-isl1208: Add support for the ISL1218, Ben Gardner
Zarlink ZL30143 DPLL Driver, Austin Boyle
[PATCH V2] i2c-designware: Change readl to readw and writel to writew,
Rajeev Kumar
[PATCH ] i2c: omap: recover from Bus Busy condition,
Shubhrajyoti D
[PATCH] i2c-designware: Change readl to readw and writel to writew,
Rajeev Kumar
[PATCH RESEND V2 0/4] i2c: i2c-au1550 updates,
Manuel Lauss
[PATCH v2] i2c: mxs: Let i2c-mxs be built for MX23,
Fabio Estevam
[PATCH] i2c: mxs: Let i2c-mxs be built for MX23,
Fabio Estevam
Re: [PATCH V2] input:ad7879-i2c use swapped varient of i2c_smbus_read_word_data,
Jonathan Cameron
[PATCH v3] i2c-designware: add OF binding support,
Rob Herring
[PATCH 2/2] i2c/nomadik: runtime PM support,
Linus Walleij
[PATCH 1/2] i2c/nomadik: cosmetic coding style corrections, Linus Walleij
[PATCH] i2c-algo-pca: Return standard fault codes, Jean Delvare
[PATCH] i2c-algo-bit: Return standard fault codes, Jean Delvare
Problems with i2c_eg20t,
Christian Gmeiner
[PATCH] i2c: tegra: __iomem annotation fix,
Olof Johansson
[PATCH 1/7 v4] i2c-eg20t: Fix bus-idle waiting issue,
Tomoya MORINAGA
Finding particular I2C adapter?,
Przemyslaw Wegrzyn
[PATCH 00/13] V5 Split i2c-designware.c to support PCI drivers.,
dirk . brandewie
- [PATCH 11/13] i2c-designware: Add support for Designware core behind PCI devices., dirk . brandewie
- [PATCH 12/13] i2c-designware: Add runtime power management support, dirk . brandewie
- [PATCH 13/13] i2c-designware: Fix PCI core warning on suspend/resume, dirk . brandewie
- [PATCH 10/13] i2c-designware: Push all register reads/writes into the core code., dirk . brandewie
- [PATCH 09/13] i2c-designware: Support multiple cores using same ISR, dirk . brandewie
- [PATCH 05/13] i2c-designware: split of i2c-designware.c into core and bus specific parts, dirk . brandewie
- [PATCH 08/13] i2c-designware: move controller config to bus specific portion of driver, dirk . brandewie
- [PATCH 04/13] i2c-designware: Move checking of IP core version to i2c_dw_init(), dirk . brandewie
- [PATCH 06/13] i2c-designware: Move retriveving the clock speed out of core code., dirk . brandewie
- [PATCH 07/13] i2c-designware: move i2c functionality bit field to be adapter specific, dirk . brandewie
- [PATCH 03/13] i2c-designware: Allow mixed endianness accesses, dirk . brandewie
- [PATCH 02/13] i2c-designware: Check component type register, dirk . brandewie
- [PATCH 01/13] i2c-designware: Use local version of readl & writel, dirk . brandewie
- Re: [PATCH 00/13] V5 Split i2c-designware.c to support PCI drivers., Ben Dooks
[PATCH v2] i2c-algo-bit: Let user test buses without failing, Jean Delvare
[PATCH 1/7 v3] i2c-eg20t: Fix bus-idle waiting issue,
Tomoya MORINAGA
[PATCH 1/7 v2] i2c-eg20t: Modify returned value s32 to long,
Tomoya MORINAGA
[PATCH 2/2] i2c-algo-bit: Be verbose on bus testing failure,
Jean Delvare
[PATCH 1/2] i2c-algo-bit: Let user test buses without failing,
Jean Delvare
[PATCH]1/1 gpio-pca953x.c dynamic assignment and higher verbosity,
Hartmut Knaack
V2 API,
David Goodenough
[PATCH v2 0/2] i2c/of: Populate multiplexed i2c busses from the device tree.,
David Daney
[PATCH 2/2 v3] i2c: i2c-riic: add dmaengine supporting, Yoshihiro Shimoda
[PATCH 1/2 v3] i2c: i2c-riic: add support for Renesas RIIC,
Yoshihiro Shimoda
[PATCH] i2c-eg20t: modified the setting of transfer rate., Toshiharu Okada
[PATCH] i2c:i2c-bfin-twi: TWI controller fails to restart next transfer in high system load.,
Sonic Zhang
[PATCH v2] i2c-tegra: Use the suspend_noirq/resume_noirq not suspend/resume,
Stephen Warren
[PATCH] i2c: boilerplate function for byte swapped smbus_write/read_word_data,
Jonathan Cameron
[PATCH RESEND] drivers: i2c: s3c2410: add support for HDMIPHY dedicated controller,
Marek Szyprowski
[PATCH 32/55] i2c: irq: Remove IRQF_DISABLED,
Yong Zhang
[PATCH 32/57] i2c: irq: Remove IRQF_DISABLED, Yong Zhang
[PATCH 1/7] i2c-eg20t: Fix bus-idle waiting issue,
Tomoya MORINAGA
[PATCH v3 0/2] Add device tree probe for i2c-imx driver,
Shawn Guo
[PATCH v3 0/2] Add device tree support for Samsung's I2C driver,
Thomas Abraham
I2C Combined Transactions in Linux,
Henri Kjellberg
Can't read DIMM SPD info (DDR2),
Michal Zatloukal
Re: [PATCH 36/62] i2c: irq: Remove IRQF_DISABLED,
Wolfram Sang
[PATCH v2] i2c: Add Device Tree support to versatile-i2c driver,
Pawel Moll
[PATCH] i2c: Add Device Tree support to versatile-i2c driver, Pawel Moll
[PATCH REPOST v2 0/2] Add device tree probe for i2c-imx driver,
Shawn Guo
Please pull bjdooks' for-31-rc5/i2c-fixes branch, Ben Dooks
[PATCH RESEND] i2c: Support for Netlogic XLR/XLS on-chip I2C controller., Ganesan Ramalingam
[PATCH V2 0/4] i2c: i2c-au1550 updates,
Manuel Lauss
[PATCH V3 1/5] i2c: Add irq_gpio field to struct i2c_client, i2c_board_info.,
Stephen Warren
- [PATCH V3 3/5] staging:iio:magnetometer:ak8975 Don't use irq_to_gpio(), Stephen Warren
- [PATCH V3 4/5] staging:iio:magnetometer:ak8975: Don't assume 0 is an invalid GPIO, Stephen Warren
- [PATCH V3 5/5] staging:iio:magnetometer:ak8975: Fix probe() error-handling, Stephen Warren
- [PATCH V3 3/5] staging:iio:magnetometer:ak8975 Don't use irq_to_gpio(), Stephen Warren
- [PATCH V3 2/5] spi: Add irq_gpio field to struct spi_device, spi_board_info., Stephen Warren
- [PATCH V3 1/5] i2c: Add irq_gpio field to struct i2c_client, i2c_board_info., Stephen Warren
- [PATCH V3 4/5] staging:iio:magnetometer:ak8975: Don't assume 0 is an invalid GPIO, Stephen Warren
- [PATCH V3 5/5] staging:iio:magnetometer:ak8975: Fix probe() error-handling, Stephen Warren
- [PATCH V3 2/5] spi: Add irq_gpio field to struct spi_device, spi_board_info., Stephen Warren
- Re: [PATCH V3 1/5] i2c: Add irq_gpio field to struct i2c_client, i2c_board_info., Jean Delvare
[PATCH V2 1/4] i2c: Add irq_gpio field to struct i2c_client.,
Stephen Warren
Re: [PATCH 1/1] drivers/i2c/busses/scx200_acb.c: Fix section mismatch warning in scx200_pci_drv, Jean Delvare
[PATCH] i2c: remove deprecated callbacks,
WANG Cong
[PATCH 0/2] i2c/of: Populate multiplexed i2c busses from the device tree.,
David Daney
[PATCH REPOST 0/3] i2c: tegra: Outstanding patches,
Stephen Warren
Outstanding Tegra I2C patches, Stephen Warren
[PATCH RESEND] i2c-pxa2xx: return proper error code in ce4100_i2c_probe error paths,
Axel Lin
[PATCH] video/backlight: Remove obsolete cleanup for clientdata,
Wolfram Sang
[PATCH] misc: Remove obsolete cleanup for clientdata,
Wolfram Sang
[PATCH] staging/olpc_dcon: Remove obsolete cleanup for clientdata,
Wolfram Sang
[PATCH] leds: Remove obsolete cleanup for clientdata,
Wolfram Sang
[GIT PULL] I2C: OMAP: misc. cleanup for v3.2,
Kevin Hilman
[GIT PULL] I2C: OMAP: misc. fixes for v3.2,
Kevin Hilman
[GIT PULL] I2C: OMAP: major cleanup for v3.2 (was for v3.1),
Kevin Hilman
[PATCH 3/3] MIPS: register hwmon on SWARM, Matt Turner
[PATCH 2/3] RTC: SMBus support for the M41T80, etc. driver,
mattst88
[PATCH 1/3] RTC: SWARM class device persistent clock support, mattst88
[RFC PATCH] add slave mode support to tegra's i2c controller,
Marc Dietrich
[PATCH] i2c: support for SiS964 south bridge, Amaury Decrême
[PATCH] i2c: tegra: Check for overflow errors with BUG_ON.,
Doug Anderson
[PATCH] i2c-dev: Use memdup_user,
Thomas Meyer
Re: [lm-sensors] How can I use two command bytes for a block read?, Guenter Roeck
[PATCH] i2c: tegra: fix possible race condition after tx,
Doug Anderson
dynamic-debug not built into scx200_acb, scx200_i2c,
Jim Cromie
[PATCH 0/2] lost i2c-nomadik patches,
Linus Walleij
Tegra I2C driver compilation failure (was: RE: [PATCH] dt: add empty of_get_property for non-dt),
Stephen Warren
[PATCH v2] i2c-isch: Add module parameter which actually set the clock divider,
Alexander Stein
[PATCH 2.6.38 1/1] scx200_acb.c: Add plain i2c (master_xfer / I2C_FUNC_I2C),
Tomas
[PATCH] i2c: I2C_ELEKTOR should depend on HAS_IOPORT,
Geert Uytterhoeven
[PATCH] i2c/tegra: I2C driver uses the suspend_noirq/resume_noirq,
Stephen Warren
[RESEND PATCH] i2c: Tegra: Add of_match_table, Stephen Warren
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
