On Mon, Mar 03, 2025 at 06:13:42PM +0530, Viken Dadhaniya wrote: > Introduce a new YAML schema for QUP-supported peripherals. Define common > properties used across QUP-supported peripherals. > > Add property `qcom,gsi-dma-allowed` to configure the Serial Engine (SE) for > QCOM GPI DMA mode. > > Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx> > Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx> > Signed-off-by: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx> > --- > .../soc/qcom/qcom,se-common-props.yaml | 26 +++++++++++++++++++ > 1 file changed, 26 insertions(+) You miss here any user of this. > create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,se-common-props.yaml > > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,se-common-props.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,se-common-props.yaml > new file mode 100644 > index 000000000000..a111e51bb1c4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,se-common-props.yaml > @@ -0,0 +1,26 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/soc/qcom/qcom,se-common-props.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: QUP Peripheral-specific properties for I2C, SPI and SERIAL bus. Drop full stop. Titles never have them. > + > +description: > + The Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) is > + a programmable module that supports a wide range of serial interfaces > + such as UART, SPI, I2C, I3C, etc. This defines the common properties used > + across QUP-supported peripherals. > + > +maintainers: > + - Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx> > + - Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx> > + > +properties: > + qcom,gsi-dma-allowed: Based on description: qcom,enable-gsi-dma (or description is not accurate) > + $ref: /schemas/types.yaml#/definitions/flag > + description: > + Configure the Serial Engine (SE) to transfer data in QCOM GPI DMA mode. > + By default, FIFO mode (PIO/CPU DMA) will be selected. Best regards, Krzysztof
