[PATCH v2 1/8] dt-bindings: qcom: geni-se: Add 'firmware-name' property for firmware loading

[Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>]

Document the 'firmware-name' property in the device tree bindings to
support loading SE (Serial Engine) firmware from the protocol driver,
allowing for more flexible firmware management.

Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
index 7b031ef09669..3e029d4d6f58 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -54,6 +54,10 @@ properties:
 
   dma-coherent: true
 
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Specify the name of the QUP firmware to load.
+
 required:
   - compatible
   - reg
@@ -135,6 +139,7 @@ examples:
             #address-cells = <2>;
             #size-cells = <2>;
             ranges;
+            firmware-name = "qcom/sa8775p/qupv3fw.elf";
 
             i2c0: i2c@a94000 {
                 compatible = "qcom,geni-i2c";
-- 
2.34.1