Configure the EEPROMs which are found on the different camera sensors on
this device.
The pull-up regulator for these I2C busses is vreg_l6p, the same supply
that powers VCC of all the EEPROMs.
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 41 ++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
index cc1f89a4015218b0ea06811d2acd4ec56078961e..769c66cb5d19dbf50e137b3a72de2e36ec4daecf 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -556,6 +556,47 @@ vreg_bob: bob {
};
};
+&cci0 {
+ status = "okay";
+};
+
+&cci0_i2c0 {
+ /* IMX800 @ 1a */
+
+ eeprom@50 {
+ compatible = "puya,p24c256c", "atmel,24c256";
+ reg = <0x50>;
+ vcc-supply = <&vreg_l6p>;
+ read-only;
+ };
+};
+
+&cci0_i2c1 {
+ /* IMX858 @ 29 */
+
+ eeprom@54 {
+ compatible = "giantec,gt24p128f", "atmel,24c128";
+ reg = <0x54>;
+ vcc-supply = <&vreg_l6p>;
+ read-only;
+ };
+};
+
+&cci1 {
+ status = "okay";
+};
+
+&cci1_i2c1 {
+ /* S5KJN1SQ03 @ 10 */
+
+ eeprom@51 {
+ compatible = "giantec,gt24p128f", "atmel,24c128";
+ reg = <0x51>;
+ vcc-supply = <&vreg_l6p>;
+ read-only;
+ };
+};
+
&dispcc {
/* Disable for now so simple-framebuffer continues working */
status = "disabled";
--
2.47.1
