The ds90ub960 driver currently uses a list of i2c_client structs to keep track of used I2C address translator (ATR) alias slots for each RX port. Keeping these i2c_client structs in the alias slot list isn't actually needed, the driver only needs to know the client address for each slot. Convert the aliased_clients list to a list of aliased client addresses. This will allow removing the "client" parameter from the i2c-atr callbacks in a future patch. Signed-off-by: Romain Gantois <romain.gantois@xxxxxxxxxxx> --- drivers/media/i2c/ds90ub960.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c index 33f362a008757578e4c96e6ea7bed2e590776d8d..7534ddf2079fef466d3a114f0be98599427639fa 100644 --- a/drivers/media/i2c/ds90ub960.c +++ b/drivers/media/i2c/ds90ub960.c @@ -467,7 +467,7 @@ struct ub960_rxport { }; } eq; - const struct i2c_client *aliased_clients[UB960_MAX_PORT_ALIASES]; + u16 aliased_addrs[UB960_MAX_PORT_ALIASES]; }; struct ub960_asd { @@ -1031,17 +1031,17 @@ static int ub960_atr_attach_client(struct i2c_atr *atr, u32 chan_id, struct device *dev = &priv->client->dev; unsigned int reg_idx; - for (reg_idx = 0; reg_idx < ARRAY_SIZE(rxport->aliased_clients); reg_idx++) { - if (!rxport->aliased_clients[reg_idx]) + for (reg_idx = 0; reg_idx < UB960_MAX_PORT_ALIASES; reg_idx++) { + if (!rxport->aliased_addrs[reg_idx]) break; } - if (reg_idx == ARRAY_SIZE(rxport->aliased_clients)) { + if (reg_idx == UB960_MAX_PORT_ALIASES) { dev_err(dev, "rx%u: alias pool exhausted\n", rxport->nport); return -EADDRNOTAVAIL; } - rxport->aliased_clients[reg_idx] = client; + rxport->aliased_addrs[reg_idx] = client->addr; ub960_rxport_write(priv, chan_id, UB960_RR_SLAVE_ID(reg_idx), client->addr << 1); @@ -1062,18 +1062,18 @@ static void ub960_atr_detach_client(struct i2c_atr *atr, u32 chan_id, struct device *dev = &priv->client->dev; unsigned int reg_idx; - for (reg_idx = 0; reg_idx < ARRAY_SIZE(rxport->aliased_clients); reg_idx++) { - if (rxport->aliased_clients[reg_idx] == client) + for (reg_idx = 0; reg_idx < UB960_MAX_PORT_ALIASES; reg_idx++) { + if (rxport->aliased_addrs[reg_idx] == client->addr) break; } - if (reg_idx == ARRAY_SIZE(rxport->aliased_clients)) { + if (reg_idx == UB960_MAX_PORT_ALIASES) { dev_err(dev, "rx%u: client 0x%02x is not mapped!\n", rxport->nport, client->addr); return; } - rxport->aliased_clients[reg_idx] = NULL; + rxport->aliased_addrs[reg_idx] = 0; ub960_rxport_write(priv, chan_id, UB960_RR_SLAVE_ALIAS(reg_idx), 0); -- 2.47.1