[PATCH v2 1/2] i2c: qcom-geni: Use dev_err_probe in the probe function

[Andi Shyti <andi.shyti@xxxxxxxxxx>]

Replace classical dev_err with dev_err_probe in the probe
function for better error reporting. Also, use dev_err_probe in
cases where the error number is clear (e.g., -EIO or -EINVAL) to
maintain consistency.

Additionally, remove redundant logging to simplify the code.

Signed-off-by: Andi Shyti <andi.shyti@xxxxxxxxxx>
---
 drivers/i2c/busses/i2c-qcom-geni.c | 33 +++++++++++++-----------------
 1 file changed, 14 insertions(+), 19 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 7a22e1f46e60..01db24188e29 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -823,11 +823,9 @@ static int geni_i2c_probe(struct platform_device *pdev)
 		return gi2c->irq;
 
 	ret = geni_i2c_clk_map_idx(gi2c);
-	if (ret) {
-		dev_err(dev, "Invalid clk frequency %d Hz: %d\n",
-			gi2c->clk_freq_out, ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "Invalid clk frequency %d Hz\n",
+				     gi2c->clk_freq_out);
 
 	gi2c->adap.algo = &geni_i2c_algo;
 	init_completion(&gi2c->done);
@@ -837,11 +835,10 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	/* Keep interrupts disabled initially to allow for low-power modes */
 	ret = devm_request_irq(dev, gi2c->irq, geni_i2c_irq, IRQF_NO_AUTOEN,
 			       dev_name(dev), gi2c);
-	if (ret) {
-		dev_err(dev, "Request_irq failed:%d: err:%d\n",
-			gi2c->irq, ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Request_irq failed: %d\n", gi2c->irq);
+
 	i2c_set_adapdata(&gi2c->adap, gi2c);
 	gi2c->adap.dev.parent = dev;
 	gi2c->adap.dev.of_node = dev->of_node;
@@ -870,16 +867,14 @@ static int geni_i2c_probe(struct platform_device *pdev)
 
 	ret = geni_se_resources_on(&gi2c->se);
 	if (ret) {
-		dev_err(dev, "Error turning on resources %d\n", ret);
 		clk_disable_unprepare(gi2c->core_clk);
-		return ret;
+		return dev_err_probe(dev, ret, "Error turning on resources\n");
 	}
 	proto = geni_se_read_proto(&gi2c->se);
 	if (proto != GENI_SE_I2C) {
-		dev_err(dev, "Invalid proto %d\n", proto);
 		geni_se_resources_off(&gi2c->se);
 		clk_disable_unprepare(gi2c->core_clk);
-		return -ENXIO;
+		return dev_err_probe(dev, -ENXIO, "Invalid proto %d\n", proto);
 	}
 
 	if (desc && desc->no_dma_support)
@@ -894,7 +889,7 @@ static int geni_i2c_probe(struct platform_device *pdev)
 		if (ret) {
 			geni_se_resources_off(&gi2c->se);
 			clk_disable_unprepare(gi2c->core_clk);
-			return dev_err_probe(dev, ret, "Failed to setup GPI DMA mode\n");
+			return ret;
 		}
 
 		dev_dbg(dev, "Using GPI DMA mode for I2C\n");
@@ -907,10 +902,10 @@ static int geni_i2c_probe(struct platform_device *pdev)
 			tx_depth = desc->tx_fifo_depth;
 
 		if (!tx_depth) {
-			dev_err(dev, "Invalid TX FIFO depth\n");
 			geni_se_resources_off(&gi2c->se);
 			clk_disable_unprepare(gi2c->core_clk);
-			return -EINVAL;
+			return dev_err_probe(dev, -EINVAL,
+					     "Invalid TX FIFO depth\n");
 		}
 
 		gi2c->tx_wm = tx_depth - 1;
@@ -924,7 +919,7 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	clk_disable_unprepare(gi2c->core_clk);
 	ret = geni_se_resources_off(&gi2c->se);
 	if (ret) {
-		dev_err(dev, "Error turning off resources %d\n", ret);
+		dev_err_probe(dev, ret, "Error turning off resources\n");
 		goto err_dma;
 	}
 
@@ -940,7 +935,7 @@ static int geni_i2c_probe(struct platform_device *pdev)
 
 	ret = i2c_add_adapter(&gi2c->adap);
 	if (ret) {
-		dev_err(dev, "Error adding i2c adapter %d\n", ret);
+		dev_err_probe(dev, ret, "Error adding i2c adapter\n");
 		pm_runtime_disable(gi2c->se.dev);
 		goto err_dma;
 	}
-- 
2.45.2