[PATCH -next v3 04/15] HID: mcp2200: Use devm_hid_hw_start_and_open in mcp2200_probe()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently, the mcp2200 module needs to maintain hid resources
by itself. Use devm_hid_hw_start_and_open helper to ensure that hid
resources are consistent with the device life cycle, and release
hid resources before device is released. So there is no need to close and
stop hid when an error occurs. At the same time, since there is no need to
do any operations in mcp2200_remove() now, so delete .remote operation.

Signed-off-by: Li Zetao <lizetao1@xxxxxxxxxx>
---
v2 -> v3: None
v2: https://lore.kernel.org/all/20240909012313.500341-5-lizetao1@xxxxxxxxxx/
v1 -> v2: Adjust commit information
v1: https://lore.kernel.org/all/20240904123607.3407364-5-lizetao1@xxxxxxxxxx/

 drivers/hid/hid-mcp2200.c | 22 ++--------------------
 1 file changed, 2 insertions(+), 20 deletions(-)

diff --git a/drivers/hid/hid-mcp2200.c b/drivers/hid/hid-mcp2200.c
index bf57f7f6caa0..56d72fc5623d 100644
--- a/drivers/hid/hid-mcp2200.c
+++ b/drivers/hid/hid-mcp2200.c
@@ -329,22 +329,13 @@ static int mcp2200_probe(struct hid_device *hdev, const struct hid_device_id *id
 		return ret;
 	}
 
-	ret = hid_hw_start(hdev, 0);
-	if (ret) {
-		hid_err(hdev, "can't start hardware\n");
+	ret = devm_hid_hw_start_and_open(hdev, 0);
+	if (ret)
 		return ret;
-	}
 
 	hid_info(hdev, "USB HID v%x.%02x Device [%s] on %s\n", hdev->version >> 8,
 			hdev->version & 0xff, hdev->name, hdev->phys);
 
-	ret = hid_hw_open(hdev);
-	if (ret) {
-		hid_err(hdev, "can't open device\n");
-		hid_hw_stop(hdev);
-		return ret;
-	}
-
 	mutex_init(&mcp->lock);
 	init_completion(&mcp->wait_in_report);
 	hid_set_drvdata(hdev, mcp);
@@ -356,20 +347,12 @@ static int mcp2200_probe(struct hid_device *hdev, const struct hid_device_id *id
 	ret = devm_gpiochip_add_data(&hdev->dev, &mcp->gc, mcp);
 	if (ret < 0) {
 		hid_err(hdev, "Unable to register gpiochip\n");
-		hid_hw_close(hdev);
-		hid_hw_stop(hdev);
 		return ret;
 	}
 
 	return 0;
 }
 
-static void mcp2200_remove(struct hid_device *hdev)
-{
-	hid_hw_close(hdev);
-	hid_hw_stop(hdev);
-}
-
 static const struct hid_device_id mcp2200_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_MCP2200) },
 	{ }
@@ -380,7 +363,6 @@ static struct hid_driver mcp2200_driver = {
 	.name		= "mcp2200",
 	.id_table	= mcp2200_devices,
 	.probe		= mcp2200_probe,
-	.remove		= mcp2200_remove,
 	.raw_event	= mcp2200_raw_event,
 };
 
-- 
2.34.1





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux