[PATCH -next v3 02/15] HID: cp2112: Use devm_hid_hw_start_and_open in cp2112_probe()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently, the cp2112 module needs to maintain hid resources
by itself. Use devm_hid_hw_start_and_open helper to ensure that hid
resources are consistent with the device life cycle, and release
hid resources before device is released. At the same time, it can avoid
the goto-release encoding, drop the err_hid_close and err_hid_stop
lables.

Signed-off-by: Li Zetao <lizetao1@xxxxxxxxxx>
---
v2 -> v3: None
v2: https://lore.kernel.org/all/20240909012313.500341-3-lizetao1@xxxxxxxxxx/
v1 -> v2: Adjust commit information
v1: https://lore.kernel.org/all/20240904123607.3407364-3-lizetao1@xxxxxxxxxx/

 drivers/hid/hid-cp2112.c | 26 +++-----------------------
 1 file changed, 3 insertions(+), 23 deletions(-)

diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c
index 20a0d1315d90..6d65c65f1b83 100644
--- a/drivers/hid/hid-cp2112.c
+++ b/drivers/hid/hid-cp2112.c
@@ -1215,22 +1215,14 @@ static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		return ret;
 	}
 
-	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
-	if (ret) {
-		hid_err(hdev, "hw start failed\n");
+	ret = devm_hid_hw_start_and_open(hdev, HID_CONNECT_HIDRAW);
+	if (ret)
 		return ret;
-	}
-
-	ret = hid_hw_open(hdev);
-	if (ret) {
-		hid_err(hdev, "hw open failed\n");
-		goto err_hid_stop;
-	}
 
 	ret = hid_hw_power(hdev, PM_HINT_FULLON);
 	if (ret < 0) {
 		hid_err(hdev, "power management error: %d\n", ret);
-		goto err_hid_close;
+		return ret;
 	}
 
 	ret = cp2112_hid_get(hdev, CP2112_GET_VERSION_INFO, buf, sizeof(buf),
@@ -1334,10 +1326,6 @@ static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	i2c_del_adapter(&dev->adap);
 err_power_normal:
 	hid_hw_power(hdev, PM_HINT_NORMAL);
-err_hid_close:
-	hid_hw_close(hdev);
-err_hid_stop:
-	hid_hw_stop(hdev);
 	return ret;
 }
 
@@ -1354,14 +1342,6 @@ static void cp2112_remove(struct hid_device *hdev)
 	}
 
 	gpiochip_remove(&dev->gc);
-	/* i2c_del_adapter has finished removing all i2c devices from our
-	 * adapter. Well behaved devices should no longer call our cp2112_xfer
-	 * and should have waited for any pending calls to finish. It has also
-	 * waited for device_unregister(&adap->dev) to complete. Therefore we
-	 * can safely free our struct cp2112_device.
-	 */
-	hid_hw_close(hdev);
-	hid_hw_stop(hdev);
 }
 
 static int cp2112_raw_event(struct hid_device *hdev, struct hid_report *report,
-- 
2.34.1





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux