Hi, On Fri, Aug 30, 2024 at 11:46:33AM GMT, Tyrone Ting wrote: > This patchset includes the following fixes: > > - Restore the npcm_i2caddr array length to fix the smatch warning. > - Enable the target functionality in the interrupt handling routine > when the i2c transfer is about to finish. > - Correct the read/write operation procedure. > - Introduce a software flag to handle the bus error (BER) condition > which is not caused by the i2c transfer. > - Modify timeout calculation. > - Assign the client address earlier logically. > - Use an i2c frequency table for the frequency parameters assignment. > - Coding style fix. > > The NPCM I2C driver is tested on NPCM750 and NPCM845 evaluation boards. first of all, Thanks Tali for your reviews. Second, Tyronne, can we please incorporate Tali's comments into commit messages and improve the code comments so that we don't leave room for more questions? Consider that not everyone knows the device and we need good reasons for accepting the changes. Thanks, Andi > Addressed comments from: > - kernel test robot : https://lore.kernel.org/oe-kbuild-all/ > 202408080319.de2B6PgU-lkp@xxxxxxxxx/ > - Dan Carpenter : https://lore.kernel.org/all/202408130818 > .FgDP5uNm-lkp@xxxxxxxxx/ > - Andrew Jeffery : https://lore.kernel.org/lkml/ > 20240807100244.16872-7-kfting@xxxxxxxxxxx/T/ > #m3ed3351bf59675bfe0de89c75aae1fb26cad5567 > > Changes since version 1: > - Restore the npcm_i2caddr array length to fix the smatch warning. > - Remove unused variables. > - Handle the condition where scl_table_cnt reaches to the maximum value. > - Fix the checkpatch warning. > > Charles Boyer (1): > i2c: npcm: Enable slave in eob interrupt > > Tyrone Ting (6): > i2c: npcm: restore slave addresses array length > i2c: npcm: correct the read/write operation procedure > i2c: npcm: use a software flag to indicate a BER condition > i2c: npcm: Modify timeout evaluation mechanism > i2c: npcm: Modify the client address assignment > i2c: npcm: use i2c frequency table > > drivers/i2c/busses/i2c-npcm7xx.c | 276 +++++++++++++++++++------------ > 1 file changed, 172 insertions(+), 104 deletions(-) > > > base-commit: 5be63fc19fcaa4c236b307420483578a56986a37 > -- > 2.34.1 >
