Currently, the mcp2221 module use devm_add_action_or_reset() to manage device resource for HID unregistration, now that a universal interface has been provided, consider using a universal interface to replace it. Signed-off-by: Li Zetao <lizetao1@xxxxxxxxxx> --- drivers/hid/hid-mcp2221.c | 26 ++------------------------ 1 file changed, 2 insertions(+), 24 deletions(-) diff --git a/drivers/hid/hid-mcp2221.c b/drivers/hid/hid-mcp2221.c index 0f93c22a479f..3b8269f7e923 100644 --- a/drivers/hid/hid-mcp2221.c +++ b/drivers/hid/hid-mcp2221.c @@ -932,15 +932,6 @@ static int mcp2221_raw_event(struct hid_device *hdev, return 1; } -/* Device resource managed function for HID unregistration */ -static void mcp2221_hid_unregister(void *ptr) -{ - struct hid_device *hdev = ptr; - - hid_hw_close(hdev); - hid_hw_stop(hdev); -} - /* This is needed to be sure hid_hw_stop() isn't called twice by the subsystem */ static void mcp2221_remove(struct hid_device *hdev) { @@ -1141,31 +1132,18 @@ static int mcp2221_probe(struct hid_device *hdev, * This driver uses the .raw_event callback and therefore does not need any * HID_CONNECT_xxx flags. */ - ret = hid_hw_start(hdev, 0); - if (ret) { - hid_err(hdev, "can't start hardware\n"); + ret = devm_hid_hw_start_and_open(hdev, 0); + if (ret) return ret; - } hid_info(hdev, "USB HID v%x.%02x Device [%s] on %s\n", hdev->version >> 8, hdev->version & 0xff, hdev->name, hdev->phys); - ret = hid_hw_open(hdev); - if (ret) { - hid_err(hdev, "can't open device\n"); - hid_hw_stop(hdev); - return ret; - } - mutex_init(&mcp->lock); init_completion(&mcp->wait_in_report); hid_set_drvdata(hdev, mcp); mcp->hdev = hdev; - ret = devm_add_action_or_reset(&hdev->dev, mcp2221_hid_unregister, hdev); - if (ret) - return ret; - hid_device_io_start(hdev); /* Set I2C bus clock diviser */ -- 2.34.1