Re: [RFT PATCH] hwmon: (spd5118) Add support for Renesas/ITD SPD5118 hub controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 16.06.24 um 22:26 schrieb Guenter Roeck:

Hi Armin,

On 6/16/24 11:09, Armin Wolf wrote:
Am 14.06.24 um 20:59 schrieb Guenter Roeck:

The SPD5118 specification says, in its documentation of the page bits
in the MR11 register:

"
This register only applies to non-volatile memory (1024) Bytes)
access of
SPD5 Hub device.
For volatile memory access, this register must be programmed to '000'.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"

Renesas/ITD SPD5118 hub controllers take this literally and disable
access
to volatile memory if the page selected in MR11 is != 0. Since the
BIOS or
ROMMON will access the non-volatile memory and likely select a page
!= 0,
this means that the driver will not instantiate since it can not
identify
the chip. Even if the driver instantiates, access to volatile registers
is blocked after a nvram read operation which selects a page other
than 0.

To solve the problem, add initialization code to select page 0 during
probe. Before doing that, use basic validation to ensure that this is
really a SPD5118 device and not some random EEPROM. Explicitly select
page 0 when accessing the volatile register space, and protect volatile
register access against nvmem access using the device mutex.

Hi,

maybe we can use struct regmap_range_cfg so the paged register
accesses are being
done by the regmap code itself?


In theory that might work, but regmap does not permit a selector
register to
be part of another range. The first range would be the non-volatile
registers,
and the selector register is part of that for all ranges.

I tried the following ranges configuration.

static const struct regmap_range_cfg spd5118_regmap_range_cfg[] = {
        {
        .selector_reg     = SPD5118_REG_I2C_LEGACY_MODE,
        .selector_mask    = SPD5118_LEGACY_PAGE_MASK,
        .selector_shift   = 0,
        .window_start     = 0,
        .window_len       = SPD5118_PAGE_SIZE,
        .range_min        = 0,
        .range_max        = SPD5118_PAGE_SIZE - 1,
        },
        {
        .selector_reg     = SPD5118_REG_I2C_LEGACY_MODE,
        .selector_mask    = SPD5118_LEGACY_PAGE_MASK,
        .selector_shift   = 0,
        .window_start     = SPD5118_PAGE_SIZE,
        .window_len       = SPD5118_PAGE_SIZE,
        .range_min        = SPD5118_PAGE_SIZE,
        .range_max        = 9 * SPD5118_PAGE_SIZE - 1,
        },
};

This results in

spd5118 0-0050: Range 0: selector for 1 in window
spd5118 0-0050: error -EINVAL: regmap init failed

If you have an idea how to configure the ranges differently,
please let me know.

Thanks,
Guenter

Oh, i did not think of this. In this case we indeed cannot use regmap here. I will test the patch tomorrow.

Thanks,
Armin Wolf






[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux