Add suspend/resume support to ensure that limit and configuration registers are updated and synchronized after a suspend/resume cycle. Cc: Armin Wolf <W_Armin@xxxxxx> Cc: Stephen Horvath <s.horvath@xxxxxxxxxxxxxx> Tested-by: Stephen Horvath <s.horvath@xxxxxxxxxxxxxx> Tested-by: Armin Wolf <W_Armin@xxxxxx> Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- v5: Added Tested-by: tags v4: Fix bug seen if the enable attribute was never read prior to a suspend/resume cycle. v3: No change v2: New patch drivers/hwmon/spd5118.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/drivers/hwmon/spd5118.c b/drivers/hwmon/spd5118.c index d3fc0ae17743..d55c073ff5fd 100644 --- a/drivers/hwmon/spd5118.c +++ b/drivers/hwmon/spd5118.c @@ -20,6 +20,7 @@ #include <linux/i2c.h> #include <linux/hwmon.h> #include <linux/module.h> +#include <linux/pm.h> #include <linux/regmap.h> #include <linux/units.h> @@ -432,6 +433,8 @@ static int spd5118_probe(struct i2c_client *client) if (!spd5118_vendor_valid(bank, vendor)) return -ENODEV; + dev_set_drvdata(dev, regmap); + hwmon_dev = devm_hwmon_device_register_with_info(dev, "spd5118", regmap, &spd5118_chip_info, NULL); @@ -449,6 +452,41 @@ static int spd5118_probe(struct i2c_client *client) return 0; } +static int spd5118_suspend(struct device *dev) +{ + struct regmap *regmap = dev_get_drvdata(dev); + u32 regval; + int err; + + /* + * Make sure the configuration register in the regmap cache is current + * before bypassing it. + */ + err = regmap_read(regmap, SPD5118_REG_TEMP_CONFIG, ®val); + if (err < 0) + return err; + + regcache_cache_bypass(regmap, true); + regmap_update_bits(regmap, SPD5118_REG_TEMP_CONFIG, SPD5118_TS_DISABLE, + SPD5118_TS_DISABLE); + regcache_cache_bypass(regmap, false); + + regcache_cache_only(regmap, true); + regcache_mark_dirty(regmap); + + return 0; +} + +static int spd5118_resume(struct device *dev) +{ + struct regmap *regmap = dev_get_drvdata(dev); + + regcache_cache_only(regmap, false); + return regcache_sync(regmap); +} + +static DEFINE_SIMPLE_DEV_PM_OPS(spd5118_pm_ops, spd5118_suspend, spd5118_resume); + static const struct i2c_device_id spd5118_id[] = { { "spd5118", 0 }, { } @@ -466,6 +504,7 @@ static struct i2c_driver spd5118_driver = { .driver = { .name = "spd5118", .of_match_table = spd5118_of_ids, + .pm = pm_sleep_ptr(&spd5118_pm_ops), }, .probe = spd5118_probe, .id_table = spd5118_id, -- 2.39.2