Read the ioclk property as reference clock if sclk not present in acpi table to make it SOC agnostic. In case, it's not populated from dts/acpi table, use the default clock of 800 MHz which is optimal in either case of sclk/ioclk. Signed-off-by: Piyush Malgujar <pmalgujar@xxxxxxxxxxx> Acked-by: Andi Shyti <andi.shyti@xxxxxxxxxx> --- drivers/i2c/busses/i2c-thunderx-pcidrv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c index 31f11b77ab663626967c86086a03213876bf4a07..32d0e3930b675484138084e1bbed2e7cf898e1e1 100644 --- a/drivers/i2c/busses/i2c-thunderx-pcidrv.c +++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c @@ -27,7 +27,7 @@ #define PCI_DEVICE_ID_THUNDER_TWSI 0xa012 -#define SYS_FREQ_DEFAULT 700000000 +#define SYS_FREQ_DEFAULT 800000000 #define OTX2_REF_FREQ_DEFAULT 100000000 #define TWSI_INT_ENA_W1C 0x1028 @@ -100,7 +100,8 @@ static void thunder_i2c_clock_enable(struct device *dev, struct octeon_i2c *i2c) i2c->sys_freq = clk_get_rate(i2c->clk); } else { /* ACPI */ - device_property_read_u32(dev, "sclk", &i2c->sys_freq); + if (device_property_read_u32(dev, "sclk", &i2c->sys_freq)) + device_property_read_u32(dev, "ioclk", &i2c->sys_freq); } skip: -- 2.43.0