From: Arnd Bergmann <arnd@xxxxxxxx>
There is at least one machine that uses this driver but does not
have support for inb()/outb() instructions.
Convert this to using ioport_map() so it can build on architectures
that don't provide these but work correctly on machines that require
using port I/O.
Fixes: 53f44c1005ba ("i2c: add HAS_IOPORT dependencies")
Reported-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Link: https://lore.kernel.org/lkml/CAMuHMdVUQ2WgtpYPYfO2T=itMmZ7w=geREqDtsP8Q3ODh9rxdw@xxxxxxxxxxxxxx/
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
drivers/i2c/busses/Kconfig | 1 -
drivers/i2c/busses/i2c-ocores.c | 21 +++++++--------------
2 files changed, 7 insertions(+), 15 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 2d5e74ac9ea0..64c985ec0fae 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -886,7 +886,6 @@ config I2C_NPCM
config I2C_OCORES
tristate "OpenCores I2C Controller"
- depends on HAS_IOPORT
help
If you say yes to this option, support will be included for the
OpenCores I2C controller. For details see
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index e106af83cef4..56a4dabf5a38 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -32,7 +32,6 @@
*/
struct ocores_i2c {
void __iomem *base;
- int iobase;
u32 reg_shift;
u32 reg_io_width;
unsigned long flags;
@@ -136,16 +135,6 @@ static inline u8 oc_getreg_32be(struct ocores_i2c *i2c, int reg)
return ioread32be(i2c->base + (reg << i2c->reg_shift));
}
-static void oc_setreg_io_8(struct ocores_i2c *i2c, int reg, u8 value)
-{
- outb(value, i2c->iobase + reg);
-}
-
-static inline u8 oc_getreg_io_8(struct ocores_i2c *i2c, int reg)
-{
- return inb(i2c->iobase + reg);
-}
-
static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value)
{
i2c->setreg(i2c, reg, value);
@@ -618,15 +607,19 @@ static int ocores_i2c_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (!res)
return -EINVAL;
- i2c->iobase = res->start;
if (!devm_request_region(&pdev->dev, res->start,
resource_size(res),
pdev->name)) {
dev_err(&pdev->dev, "Can't get I/O resource.\n");
return -EBUSY;
}
- i2c->setreg = oc_setreg_io_8;
- i2c->getreg = oc_getreg_io_8;
+ i2c->base = devm_ioport_map(&pdev->dev, res->start,
+ resource_size(res));
+ if (!i2c->base) {
+ dev_err(&pdev->dev, "Can't map I/O resource.\n");
+ return -EBUSY;
+ }
+ i2c->reg_io_width = 1;
}
pdata = dev_get_platdata(&pdev->dev);
--
2.39.2
