On Fri, Apr 05, 2024 at 04:27:43PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@xxxxxxxx>
>
> When I2C_MUX is a loadable module but I2C_I801 is built-in, the newly
> added notifier function causes a link error:
>
> x86_64-linux-ld: drivers/i2c/busses/i2c-i801.o: in function `i801_notifier_call':
> i2c-i801.c:(.text+0x1f5): undefined reference to `i2c_root_adapter'
>
> This code is only built if I2C_MUX_GPIO is also enabled, so add a
> conditional dependency that allows building the driver as before if the
> GPIO part is disabled, but otherwise require the linker dependency at
> Kconfig level.
>
> With the added dependency, the driver cannot be selected by a builtin
> ITCO_WDT driver when I2C_MUX_GPIO is a loadable module, so remove
> the 'select' statement in that driver as well. This was apparently
> never needed at compile-time, and the watchdog driver just needs either
> the LPC or the I2C drivers, but never both.
>
> Configurations that rely on the implied 'select' from the watchdog
> driver now need to enable all three.
>
> Fixes: 71b494e043d2 ("i2c: i801: Call i2c_register_spd for muxed child segments")
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> ---
> drivers/i2c/busses/Kconfig | 1 +
> drivers/watchdog/Kconfig | 2 --
> 2 files changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 1872f1995c77..2619018dd756 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -108,6 +108,7 @@ config I2C_HIX5HD2
> config I2C_I801
> tristate "Intel 82801 (ICH/PCH)"
> depends on PCI
> + depends on I2C_MUX || I2C_MUX_GPIO=n
> select P2SB if X86
> select CHECK_SIGNATURE if X86 && DMI
> select I2C_SMBUS
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 0b0df3fe1efd..4dfb3773e6e2 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1301,8 +1301,6 @@ config ITCO_WDT
> select WATCHDOG_CORE
> depends on I2C || I2C=n
> depends on MFD_INTEL_PMC_BXT || !MFD_INTEL_PMC_BXT
> - select LPC_ICH if !EXPERT
> - select I2C_I801 if !EXPERT && I2C
Sorry, I don't understand why LPC_ICH and I2C_I801 are neither a dependency
nor need to be selected. What if both LPC_ICH=n and I2C_I801=n, or if one is
selected but the other is needed to connect to the watchdog ?
Guenter
> help
> Hardware driver for the intel TCO timer based watchdog devices.
> These drivers are included in the Intel 82801 I/O Controller
> --
> 2.39.2
>
