> -----Original Message-----
> From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
> Sent: Friday, 22 March 2024 15:25
> To: linux-i2c@xxxxxxxxxxxxxxx
> Cc: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>; Vadim Pasternak
> <vadimp@xxxxxxxxxx>; Michael Shych <michaelsh@xxxxxxxxxx>; Andi Shyti
> <andi.shyti@xxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx
> Subject: [PATCH 35/64] i2c: mlxcpld: reword according to newest specification
>
> Match the wording of this driver wrt. the newest I2C v7, SMBus 3.2, I3C
> specifications and replace "master/slave" with more appropriate terms.
> They are also more specific because we distinguish now between a remote
> entity ("client") and a local one ("target").
>
> Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Acked-by: Vadim Pasternak <vadimp@xxxxxxxxxx>
> ---
> drivers/i2c/busses/i2c-mlxcpld.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-mlxcpld.c b/drivers/i2c/busses/i2c-
> mlxcpld.c
> index 099291a0411d..786d4c51f65a 100644
> --- a/drivers/i2c/busses/i2c-mlxcpld.c
> +++ b/drivers/i2c/busses/i2c-mlxcpld.c
> @@ -197,8 +197,8 @@ static int mlxcpld_i2c_check_status(struct
> mlxcpld_i2c_priv *priv, int *status)
> if (val & MLXCPLD_LPCI2C_TRANS_END) {
> if (val & MLXCPLD_LPCI2C_STATUS_NACK)
> /*
> - * The slave is unable to accept the data. No such
> - * slave, command not understood, or unable to
> accept
> + * The client is unable to accept the data. No such
> + * client, command not understood, or unable to
> accept
> * any more data.
> */
> *status = MLXCPLD_LPCI2C_NACK_IND;
> @@ -280,7 +280,7 @@ static int mlxcpld_i2c_wait_for_free(struct
> mlxcpld_i2c_priv *priv) }
>
> /*
> - * Wait for master transfer to complete.
> + * Wait for host transfer to complete.
> * It puts current process to sleep until we get interrupt or timeout expires.
> * Returns the number of transferred or read bytes or error (<0).
> */
> @@ -315,7 +315,7 @@ static int mlxcpld_i2c_wait_for_tc(struct
> mlxcpld_i2c_priv *priv)
> /*
> * Actual read data len will be always the same as
> * requested len. 0xff (line pull-up) will be returned
> - * if slave has no data to return. Thus don't read
> + * if client has no data to return. Thus don't read
> * MLXCPLD_LPCI2C_NUM_DAT_REG reg from CPLD. Only in
> case of
> * SMBus block read transaction data len can be different,
> * check this case.
> @@ -375,7 +375,7 @@ static void mlxcpld_i2c_xfer_msg(struct
> mlxcpld_i2c_priv *priv)
> }
>
> /*
> - * Set target slave address with command for master transfer.
> + * Set client address with command for host transfer.
> * It should be latest executed function before CPLD transaction.
> */
> cmd = (priv->xfer.msg[0].addr << 1) | priv->xfer.cmd; @@ -449,7
> +449,7 @@ static u32 mlxcpld_i2c_func(struct i2c_adapter *adap) }
>
> static const struct i2c_algorithm mlxcpld_i2c_algo = {
> - .master_xfer = mlxcpld_i2c_xfer,
> + .xfer = mlxcpld_i2c_xfer,
> .functionality = mlxcpld_i2c_func
> };
>
> --
> 2.43.0
