Am Freitag, 22. März 2024, 14:25:40 CET schrieb Wolfram Sang: > Match the wording of this driver wrt. the newest I2C v7, SMBus 3.2, I3C > specifications and replace "master/slave" with more appropriate terms. > They are also more specific because we distinguish now between a remote > entity ("client") and a local one ("target"). > > Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> Reviewed-by: Heiko Stuebner <heiko@xxxxxxxxx> > --- > drivers/i2c/busses/i2c-rk3x.c | 18 +++++++++--------- > 1 file changed, 9 insertions(+), 9 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c > index 086fdf262e7b..01febd886bdd 100644 > --- a/drivers/i2c/busses/i2c-rk3x.c > +++ b/drivers/i2c/busses/i2c-rk3x.c > @@ -28,8 +28,8 @@ > /* Register Map */ > #define REG_CON 0x00 /* control register */ > #define REG_CLKDIV 0x04 /* clock divisor register */ > -#define REG_MRXADDR 0x08 /* slave address for REGISTER_TX */ > -#define REG_MRXRADDR 0x0c /* slave register address for REGISTER_TX */ > +#define REG_MRXADDR 0x08 /* client address for REGISTER_TX */ > +#define REG_MRXRADDR 0x0c /* client register address for REGISTER_TX */ > #define REG_MTXCNT 0x10 /* number of bytes to be transmitted */ > #define REG_MRXCNT 0x14 /* number of bytes to be received */ > #define REG_IEN 0x18 /* interrupt enable */ > @@ -68,8 +68,8 @@ enum { > /* REG_IEN/REG_IPD bits */ > #define REG_INT_BTF BIT(0) /* a byte was transmitted */ > #define REG_INT_BRF BIT(1) /* a byte was received */ > -#define REG_INT_MBTF BIT(2) /* master data transmit finished */ > -#define REG_INT_MBRF BIT(3) /* master data receive finished */ > +#define REG_INT_MBTF BIT(2) /* host data transmit finished */ > +#define REG_INT_MBRF BIT(3) /* host data receive finished */ > #define REG_INT_START BIT(4) /* START condition generated */ > #define REG_INT_STOP BIT(5) /* STOP condition generated */ > #define REG_INT_NAKRCV BIT(6) /* NACK received */ > @@ -184,7 +184,7 @@ struct rk3x_i2c_soc_data { > * @wait: the waitqueue to wait for i2c transfer > * @busy: the condition for the event to wait for > * @msg: current i2c message > - * @addr: addr of i2c slave device > + * @addr: addr of i2c client device > * @mode: mode of i2c transfer > * @is_last_msg: flag determines whether it is the last msg in this transfer > * @state: state of i2c transfer > @@ -979,7 +979,7 @@ static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num) > /* > * The I2C adapter can issue a small (len < 4) write packet before > * reading. This speeds up SMBus-style register reads. > - * The MRXADDR/MRXRADDR hold the slave address and the slave register > + * The MRXADDR/MRXRADDR hold the client address and the client register > * address in this case. > */ > > @@ -1016,7 +1016,7 @@ static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num) > addr |= 1; /* set read bit */ > > /* > - * We have to transmit the slave addr first. Use > + * We have to transmit the client addr first. Use > * MOD_REGISTER_TX for that purpose. > */ > i2c->mode = REG_CON_MOD_REGISTER_TX; > @@ -1162,8 +1162,8 @@ static u32 rk3x_i2c_func(struct i2c_adapter *adap) > } > > static const struct i2c_algorithm rk3x_i2c_algorithm = { > - .master_xfer = rk3x_i2c_xfer, > - .master_xfer_atomic = rk3x_i2c_xfer_polling, > + .xfer = rk3x_i2c_xfer, > + .xfer_atomic = rk3x_i2c_xfer_polling, > .functionality = rk3x_i2c_func, > }; > >