Match the wording of this driver wrt. the newest I2C v7, SMBus 3.2, I3C
specifications and replace "master/slave" with more appropriate terms.
They are also more specific because we distinguish now between a remote
entity ("client") and a local one ("target").
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-bcm2835.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index b92de1944221..62776e7fc586 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * BCM2835 master mode driver
+ * BCM2835 host controller mode driver
*/
#include <linux/clk.h>
@@ -25,7 +25,7 @@
#define BCM2835_I2C_DEL 0x18
/*
* 16-bit field for the number of SCL cycles to wait after rising SCL
- * before deciding the slave is not responding. 0 disables the
+ * before deciding the client is not responding. 0 disables the
* timeout detection.
*/
#define BCM2835_I2C_CLKT 0x1c
@@ -223,7 +223,7 @@ static void bcm2835_drain_rxfifo(struct bcm2835_i2c_dev *i2c_dev)
/*
* Repeated Start Condition (Sr)
* The BCM2835 ARM Peripherals datasheet mentions a way to trigger a Sr when it
- * talks about reading from a slave with 10 bit address. This is achieved by
+ * talks about reading from a client with 10 bit address. This is achieved by
* issuing a write, poll the I2CS.TA flag and wait for it to be set, and then
* issue a read.
* A comment in https://github.com/raspberrypi/linux/issues/254 shows how the
@@ -391,7 +391,7 @@ static u32 bcm2835_i2c_func(struct i2c_adapter *adap)
}
static const struct i2c_algorithm bcm2835_i2c_algo = {
- .master_xfer = bcm2835_i2c_xfer,
+ .xfer = bcm2835_i2c_xfer,
.functionality = bcm2835_i2c_func,
};
--
2.43.0
