On a N100-based mini pc I see the following. I found older reports with the same symptom,
but root cause seems to be different.
- Interrupt 27 is not shared in my case
- I checked register values on entering the ISR. Interrupt mask and DW_IC_RAW_INTR_STAT
are both 0.
- After an interrupt storm of 100,000 interrupts the interrupt gets disabled
- The issue affects channel 0 only
If not the I2C IP, then who else can touch the interrupt line?
May the BIOS play a role here? I have few ACPI errors on boot, and it seems the vendor
of this dirt-cheap device didn't give much love to the BIOS.
[ 5.228854] irq 27: nobody cared (try booting with the "irqpoll" option)
[ 5.228929] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0-next-20240312+ #4
[ 5.228981] Hardware name: Default string Default string/Default string, BIOS ADLN.M6.SODIMM.ZB.CY.015 08/08/2023
[ 5.229045] Call Trace:
[ 5.229065] <IRQ>
[ 5.229084] dump_stack_lvl+0x81/0xe0
[ 5.229125] dump_stack+0x10/0x20
[ 5.229154] __report_bad_irq+0x2b/0xc0
[ 5.229190] note_interrupt+0x28f/0x2d0
[ 5.229220] ? __this_cpu_preempt_check+0x13/0x20
[ 5.229262] handle_irq_event+0x70/0x80
[ 5.229296] handle_fasteoi_irq+0x90/0x210
[ 5.229331] __common_interrupt+0x6f/0x140
[ 5.229369] common_interrupt+0xab/0xd0
[ 5.229403] </IRQ>
[ 5.229420] <TASK>
[ 5.229440] asm_common_interrupt+0x27/0x40
[ 5.229476] RIP: 0010:cpuidle_enter_state+0xff/0x4f0
[ 5.229516] Code: 8b 00 48 0f a3 05 c1 7f 9d 00 0f 82 fd 02 00 00 31 ff e8 a4 03 6a ff 80 7d cf 00 0f 85 cc 02 00 00 e8 15 e0 77 ff fb 45 85 ff <0f> 88 f4 01 00 00 49 63 f7 4c 89 f2 48 8d 04 76 48 8d 04 86 49 8d
[ 5.229627] RSP: 0018:ffffa6c44016fe58 EFLAGS: 00000202
[ 5.229668] RAX: 000000000007a19b RBX: ffffc6c43fcac660 RCX: 0000000000000000
[ 5.229715] RDX: 0000000000000000 RSI: ffffffff89323d8f RDI: ffffffff8930f62b
[ 5.229760] RBP: ffffa6c44016fe98 R08: 0000000000000001 R09: 0000000000000000
[ 5.229806] R10: 0000000000000001 R11: ffffa2a0b7aad824 R12: 0000000000000001
[ 5.229851] R13: ffffffff895b69a0 R14: 0000000137a9c564 R15: 0000000000000001
[ 5.229907] ? cpuidle_enter_state+0xfb/0x4f0
[ 5.229946] cpuidle_enter+0x29/0x40
[ 5.229978] call_cpuidle+0x1d/0x40
[ 5.230010] do_idle+0x1c2/0x220
[ 5.230040] cpu_startup_entry+0x24/0x30
[ 5.230072] start_secondary+0xf9/0x100
[ 5.230105] common_startup_64+0x13e/0x148
[ 5.230148] </TASK>
[ 5.230166] handlers:
[ 5.230185] [<00000000a498cda6>] i2c_dw_isr [i2c_designware_core]
[ 5.230354] Disabling IRQ #27
CPU0 CPU1 CPU2 CPU3
8: 0 0 0 0 IR-IO-APIC 8-edge rtc0
9: 0 51 0 0 IR-IO-APIC 9-fasteoi acpi
16: 0 3 0 0 IR-IO-APIC 16-fasteoi i801_smbus
27: 0 100000 0 0 IR-IO-APIC 27-fasteoi i2c_designware.0
29: 0 0 0 0 IR-IO-APIC 29-fasteoi i2c_designware.2
31: 0 0 0 0 IR-IO-APIC 31-fasteoi i2c_designware.4
32: 0 0 0 0 IR-IO-APIC 32-fasteoi i2c_designware.5
33: 0 0 0 0 IR-IO-APIC 33-fasteoi i2c_designware.3
40: 0 0 0 0 IR-IO-APIC 40-fasteoi i2c_designware.1
Thanks, Heiner
