On 18/03/2024 12:21, Radu Sabau wrote:
> Add support for ADP1050 Digital Controller for Isolated Power Supplies
> with PMBus interface Voltage, Current and Temperature Monitor.
>
...
> +static int adp1050_probe(struct i2c_client *client)
> +{
> + u32 vin_scale_monitor, iin_scale_monitor;
> + int ret;
> +
> + if (!i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_WRITE_WORD_DATA))
> + return -ENODEV;
> +
> + /* Unlock CHIP's password in order to be able to read/write to it's
> + * VIN_SCALE and IIN_SCALE registers.
> + */
> + ret = i2c_smbus_write_word_data(client, ADP1050_CHIP_PASSWORD, 0xFFFF);
> + if (ret < 0) {
> + dev_err_probe(&client->dev, "Device can't be unlocked.\n");
Syntax is: return dev_err_probe(). Same in other places.
> + return ret;
> + }
> +
> + ret = i2c_smbus_write_word_data(client, ADP1050_CHIP_PASSWORD, 0xFFFF);
> + if (ret < 0) {
> + dev_err_probe(&client->dev, "Device couldn't be unlocked.\n");
> + return ret;
> + }
> +
> + /* If adi,vin-scale-monitor isn't set or is set to 0 means that the
> + * VIN monitor isn't used, therefore 0 is used as scale in order
> + * for the readings to return 0.
> + */
Please use Linux coding style comments. /* and aligned */.
> + if (device_property_read_u32(&client->dev, "adi,vin-scale-monitor",
> + &vin_scale_monitor))
> + vin_scale_monitor = 0;
> +
> + /* If adi,iin-scale-monitor isn't set or is set to 0 means that the
> + * IIN monitor isn't used, therefore 0 is used as scale in order
> + * for the readings to return 0.
> + */
> + if (device_property_read_u32(&client->dev, "adi,iin-scale-monitor",
> + &iin_scale_monitor))
> + iin_scale_monitor = 0;
> +
> + ret = i2c_smbus_write_word_data(client, ADP1050_VIN_SCALE_MONITOR,
> + vin_scale_monitor);
> + if (ret < 0)
> + return ret;
> +
> + ret = i2c_smbus_write_word_data(client, ADP1050_IIN_SCALE_MONITOR,
> + iin_scale_monitor);
> + if (ret < 0)
> + return ret;
> +
> + return pmbus_do_probe(client, &adp1050_info);
> +}
> +
> +static const struct i2c_device_id adp1050_id[] = {
> + {"adp1050", 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, adp1050_id);
> +
> +static const struct of_device_id adp1050_of_match[] = {
> + { .compatible = "adi,adp1050"},
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, adp1050_of_match);
> +
> +static struct i2c_driver adp1050_driver = {
> + .driver = {
> + .name = "adp1050",
> + .of_match_table = of_match_ptr(adp1050_of_match),
Drop of_match_ptr, you will have here warnings.
> + },
> + .probe = adp1050_probe,
> + .id_table = adp1050_id,
> +};
> +module_i2c_driver(adp1050_driver);
> +
> +MODULE_AUTHOR("Radu Sabau <radu.sabau@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("Analog Devices ADP1050 HWMON PMBus Driver");
> +MODULE_LICENSE("GPL");
> +MODULE_IMPORT_NS(PMBUS);
Best regards,
Krzysztof
