Use dev_err_probe() instead of dev_err() in the probe() function to simplify the code and standardize the error output. Signed-off-by: Thomas Richard <thomas.richard@xxxxxxxxxxx> --- drivers/pci/controller/cadence/pci-j721e.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c index 85718246016b..98484f001562 100644 --- a/drivers/pci/controller/cadence/pci-j721e.c +++ b/drivers/pci/controller/cadence/pci-j721e.c @@ -482,20 +482,20 @@ static int j721e_pcie_probe(struct platform_device *pdev) pm_runtime_enable(dev); ret = pm_runtime_get_sync(dev); if (ret < 0) { - dev_err(dev, "pm_runtime_get_sync failed\n"); + dev_err_probe(dev, ret, "pm_runtime_get_sync failed\n"); goto err_get_sync; } ret = j721e_pcie_ctrl_init(pcie); if (ret < 0) { - dev_err(dev, "pm_runtime_get_sync failed\n"); + dev_err_probe(dev, ret, "pm_runtime_get_sync failed\n"); goto err_get_sync; } ret = devm_request_irq(dev, irq, j721e_pcie_link_irq_handler, 0, "j721e-pcie-link-down-irq", pcie); if (ret < 0) { - dev_err(dev, "failed to request link state IRQ %d\n", irq); + dev_err_probe(dev, ret, "failed to request link state IRQ %d\n", irq); goto err_get_sync; } @@ -505,28 +505,25 @@ static int j721e_pcie_probe(struct platform_device *pdev) case PCI_MODE_RC: gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(gpiod)) { - ret = PTR_ERR(gpiod); - if (ret != -EPROBE_DEFER) - dev_err(dev, "Failed to get reset GPIO\n"); + ret = dev_err_probe(dev, PTR_ERR(gpiod), "Failed to get reset GPIO\n"); goto err_get_sync; } ret = cdns_pcie_init_phy(dev, cdns_pcie); if (ret) { - dev_err(dev, "Failed to init phy\n"); + dev_err_probe(dev, ret, "Failed to init phy\n"); goto err_get_sync; } clk = devm_clk_get_optional(dev, "pcie_refclk"); if (IS_ERR(clk)) { - ret = PTR_ERR(clk); - dev_err(dev, "failed to get pcie_refclk\n"); + ret = dev_err_probe(dev, PTR_ERR(clk), "failed to get pcie_refclk\n"); goto err_pcie_setup; } ret = clk_prepare_enable(clk); if (ret) { - dev_err(dev, "failed to enable pcie_refclk\n"); + dev_err_probe(dev, ret, "failed to enable pcie_refclk\n"); goto err_pcie_setup; } pcie->refclk = clk; @@ -554,7 +551,7 @@ static int j721e_pcie_probe(struct platform_device *pdev) case PCI_MODE_EP: ret = cdns_pcie_init_phy(dev, cdns_pcie); if (ret) { - dev_err(dev, "Failed to init phy\n"); + dev_err_probe(dev, ret, "Failed to init phy\n"); goto err_get_sync; } -- 2.39.2