Hi Andi, On Thu, 15 Feb 2024 at 02:42, Andi Shyti <andi.shyti@xxxxxxxxxx> wrote: > > Hi Naresh, > > On Tue, Feb 13, 2024 at 07:52:26PM +0530, Naresh Solanki wrote: > > From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx> > > > > Maxim Max7357 has a configuration register to enable additional > > features. These features aren't enabled by default & its up to > > board designer to enable the same as it may have unexpected side effects. > > > > These should be validated for proper functioning & detection of devices > > in secondary bus as sometimes it can cause secondary bus being disabled. > > > > Add booleans for: > > - maxim,isolate-stuck-channel > > - maxim,send-flush-out-sequence > > - maxim,preconnection-wiggle-test-enable > > > > Signed-off-by: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx> > > Signed-off-by: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx> > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > > this series was already applied and I sent the notification. > Didn't you receive it? > > You can check here[*] (branch i2c/i2c-host). Acknowledged. Thanks. Regards, Naresh > > Thanks, > Andi > > [*] https://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux.git/log/?h=i2c/i2c-host
