Hi Tim,
On Wed, Nov 22, 2023 at 11:22:26PM +1100, Tim Lunn wrote:
> Rockchip RV1126 has special case mask bits for i2c2.
>
> i2c2 wasnt previously enabled in rv1126.dtsi, adding DT node alone
> is not sufficient to enable i2c2. This patch fixes the i2c2 bus.
If I don't have sufficient information about the hardware this
description is completely meaningless to me.
> Signed-off-by: Tim Lunn <tim@xxxxxxxxxxxxxx>
> ---
>
> Changes in v2:
> - i2c: clarify commit message
>
> drivers/i2c/busses/i2c-rk3x.c | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
> index a044ca0c35a1..151927466d1d 100644
> --- a/drivers/i2c/busses/i2c-rk3x.c
> +++ b/drivers/i2c/busses/i2c-rk3x.c
> @@ -1288,8 +1288,11 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
> return -EINVAL;
> }
>
> - /* 27+i: write mask, 11+i: value */
> - value = BIT(27 + bus_nr) | BIT(11 + bus_nr);
> + if (i2c->soc_data == &rv1126_soc_data && bus_nr == 2)
> + value = BIT(20) | BIT(4);
Any chance to put a comment here as it is in the other
assignment?
Are the two assignment mutually exclusive?
Heiko, any chance to take a look here?
Thanks,
Andi
> + else
> + /* 27+i: write mask, 11+i: value */
> + value = BIT(27 + bus_nr) | BIT(11 + bus_nr);
>
> ret = regmap_write(grf, i2c->soc_data->grf_offset, value);
> if (ret != 0) {
> --
> 2.40.1
>
