RE: [PATCH v6 2/2] hwmon: pmbus: Add ltc4286 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Guenter Roeck <groeck7@xxxxxxxxx> On Behalf Of Guenter Roeck
> Sent: Wednesday, November 22, 2023 12:14 AM
> To: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@xxxxxxxxxx>;
> patrick@xxxxxxxxx; Jean Delvare <jdelvare@xxxxxxxx>; Jonathan Corbet
> <corbet@xxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@xxxxxxxxxx>; Conor Dooley <conor+dt@xxxxxxxxxx>;
> linux-i2c@xxxxxxxxxxxxxxx; linux-hwmon@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> linux-doc@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH v6 2/2] hwmon: pmbus: Add ltc4286 driver
> 
>   Security Reminder: Please be aware that this email is sent by an external
> sender.
> 
> On 11/20/23 21:07, Delphine CC Chiu wrote:
> > Add a driver to support ltc4286 chip
> >
> > Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
> > ---
> > Changelog:
> >    v6 - Check VRANGE_SELECT before driver loading
> >    v5 - Check the overflow when reading rsense
> >       - Set default rsense value
> >    v4 - Add empty line before "config SENSORS_LTC4286" in Kconfig
> >       - Add ltc4286 to Documentation/hwmon/index.rst
> >       - Revise comment typo
> >       - Use devm_kmemdup instead of memcpy
> >       - Check MBR value before writting into
> >    v3 - Use dev_err_probe() instead of dev_err()
> >       - The VRANGE_SELECT bit only be written if it actually changed
> >       - Avoid the info pointer being overwritten
> >       - Check the MBR value range to avoid overflow
> >       - Revise ltc4286.rst to corrcet description
> >    v2 - Revise Linear Technologies LTC4286 to
> >         Analog Devices LTC4286 in Kconfig
> >       - Add more description for this driver in Kconfig
> >       - Add some comments for MBR setting in ltc4286.c
> >       - Add ltc4286.rst
> > ---
> >   Documentation/hwmon/index.rst   |   1 +
> >   Documentation/hwmon/ltc4286.rst |  95 +++++++++++++++++
> >   drivers/hwmon/pmbus/Kconfig     |  10 ++
> >   drivers/hwmon/pmbus/Makefile    |   1 +
> >   drivers/hwmon/pmbus/ltc4286.c   | 183
> ++++++++++++++++++++++++++++++++
> >   5 files changed, 290 insertions(+)
> >   create mode 100644 Documentation/hwmon/ltc4286.rst
> >   create mode 100644 drivers/hwmon/pmbus/ltc4286.c
> >
> > diff --git a/Documentation/hwmon/index.rst
> > b/Documentation/hwmon/index.rst index 72f4e6065bae..080827cc4c34
> > 100644
> > --- a/Documentation/hwmon/index.rst
> > +++ b/Documentation/hwmon/index.rst
> > @@ -128,6 +128,7 @@ Hardware Monitoring Kernel Drivers
> >      ltc4245
> >      ltc4260
> >      ltc4261
> > +   ltc4286
> >      max127
> >      max15301
> >      max16064
> > diff --git a/Documentation/hwmon/ltc4286.rst
> > b/Documentation/hwmon/ltc4286.rst new file mode 100644 index
> > 000000000000..2cd149676d86
> > --- /dev/null
> > +++ b/Documentation/hwmon/ltc4286.rst
> > @@ -0,0 +1,95 @@
> > +.. SPDX-License-Identifier: GPL-2.0-or-later
> > +
> > +Kernel driver ltc4286
> > +=====================
> > +
> > +Supported chips:
> > +
> > +  * Analog Devices LTC4286
> > +
> > +    Prefix: 'ltc4286'
> > +
> > +    Addresses scanned: -
> > +
> > +    Datasheet:
> > + https://www.analog.com/media/en/technical-documentation/data-sheets/
> > + ltc4286.pdf
> > +
> > +  * Analog Devices LTC4287
> > +
> > +    Prefix: 'ltc4287'
> > +
> > +    Addresses scanned: -
> > +
> > +    Datasheet:
> > + https://www.analog.com/media/en/technical-documentation/data-sheets/
> > + ltc4287.pdf
> > +
> > +Author: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
> > +
> > +
> > +Description
> > +-----------
> > +
> > +This driver supports hardware monitoring for Analog Devices LTC4286
> > +and LTC4287 Hot-Swap Controller and Digital Power Monitors.
> > +
> > +LTC4286 and LTC4287 are hot-swap controllers that allow a circuit
> > +board to be removed from or inserted into a live backplane. They also
> > +feature current and voltage readback via an integrated 12 bit
> > +analog-to-digital converter (ADC), accessed using a PMBus interface.
> > +
> > +The driver is a client driver to the core PMBus driver. Please see
> > +Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
> > +
> > +
> > +Usage Notes
> > +-----------
> > +
> > +This driver does not auto-detect devices. You will have to
> > +instantiate the devices explicitly. Please see
> > +Documentation/i2c/instantiating-devices.rst for details.
> > +
> > +The shunt value in micro-ohms can be set via device tree at
> > +compile-time. Please refer to the
> > +Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml for bindings
> if the device tree is used.
> > +
> > +
> > +Platform data support
> > +---------------------
> > +
> > +The driver supports standard PMBus driver platform data. Please see
> > +Documentation/hwmon/pmbus.rst for details.
> > +
> > +
> > +Sysfs entries
> > +-------------
> > +
> > +The following attributes are supported. Limits are read-write,
> > +history reset attributes are write-only, all other attributes are read-only.
> > +
> > +=======================
> =======================================================
> > +in1_label            "vin"
> > +in1_input            Measured voltage.
> > +in1_alarm            Input voltage alarm.
> > +in1_min              Minimum input voltage.
> > +in1_max              Maximum input voltage.
> > +
> > +in2_label            "vout1"
> > +in2_input            Measured voltage.
> > +in2_alarm            Output voltage alarm.
> > +in2_min              Minimum output voltage.
> > +in2_max              Maximum output voltage.
> > +
> > +curr1_label          "iout1"
> > +curr1_input          Measured current.
> > +curr1_alarm          Output current alarm.
> > +curr1_max            Maximum current.
> > +
> > +power1_label         "pin"
> > +power1_input         Input power.
> > +power1_alarm         Input power alarm.
> > +power1_max           Maximum poewr.
> > +
> > +temp1_input          Chip temperature.
> > +temp1_min            Minimum chip temperature.
> > +temp1_max            Maximum chip temperature.
> > +temp1_crit           Critical chip temperature.
> > +temp1_alarm          Chip temperature alarm.
> > +=======================
> > +=======================================================
> > diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> > index b4e93bd5835e..2d4f972e5a65 100644
> > --- a/drivers/hwmon/pmbus/Kconfig
> > +++ b/drivers/hwmon/pmbus/Kconfig
> > @@ -227,6 +227,16 @@ config SENSORS_LTC3815
> >         This driver can also be built as a module. If so, the module will
> >         be called ltc3815.
> >
> > +config SENSORS_LTC4286
> > +     bool "Analog Devices LTC4286"
> > +     help
> > +       LTC4286 is an integrated solution for hot swap applications that
> > +       allows a board to be safely inserted and removed from a live
> > +       backplane.
> > +       This chip could be used to monitor voltage, current, ...etc.
> > +       If you say yes here you get hardware monitoring support for
> Analog
> > +       Devices LTC4286.
> > +
> >   config SENSORS_MAX15301
> >       tristate "Maxim MAX15301"
> >       help
> > diff --git a/drivers/hwmon/pmbus/Makefile
> > b/drivers/hwmon/pmbus/Makefile index 84ee960a6c2d..94e28f6d6a61
> 100644
> > --- a/drivers/hwmon/pmbus/Makefile
> > +++ b/drivers/hwmon/pmbus/Makefile
> > @@ -24,6 +24,7 @@ obj-$(CONFIG_SENSORS_LM25066)       +=
> lm25066.o
> >   obj-$(CONFIG_SENSORS_LT7182S)       += lt7182s.o
> >   obj-$(CONFIG_SENSORS_LTC2978)       += ltc2978.o
> >   obj-$(CONFIG_SENSORS_LTC3815)       += ltc3815.o
> > +obj-$(CONFIG_SENSORS_LTC4286)        += ltc4286.o
> >   obj-$(CONFIG_SENSORS_MAX15301)      += max15301.o
> >   obj-$(CONFIG_SENSORS_MAX16064)      += max16064.o
> >   obj-$(CONFIG_SENSORS_MAX16601)      += max16601.o
> > diff --git a/drivers/hwmon/pmbus/ltc4286.c
> > b/drivers/hwmon/pmbus/ltc4286.c new file mode 100644 index
> > 000000000000..e43e05579be1
> > --- /dev/null
> > +++ b/drivers/hwmon/pmbus/ltc4286.c
> > @@ -0,0 +1,183 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +
> > +#include <linux/err.h>
> > +#include <linux/i2c.h>
> > +#include <linux/init.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/pmbus.h>
> > +#include "pmbus.h"
> > +
> > +/* LTC4286 register */
> > +#define LTC4286_MFR_CONFIG1  0xF2
> > +
> > +/* LTC4286 configuration */
> > +#define VRANGE_SELECT_BIT    BIT(1)
> > +
> > +#define LTC4286_MFR_ID_SIZE  3
> > +#define VRANGE_102P4         1
> > +
> > +/*
> > + * Initialize the MBR as default settings which is referred to
> > +LTC4286 datasheet
> > + * (March 22, 2022 version) table 3 page 16  */ static struct
> > +pmbus_driver_info ltc4286_info = {
> > +     .pages = 1,
> > +     .format[PSC_VOLTAGE_IN] = direct,
> > +     .format[PSC_VOLTAGE_OUT] = direct,
> > +     .format[PSC_CURRENT_OUT] = direct,
> > +     .format[PSC_POWER] = direct,
> > +     .format[PSC_TEMPERATURE] = direct,
> > +     .m[PSC_VOLTAGE_IN] = 32,
> > +     .b[PSC_VOLTAGE_IN] = 0,
> > +     .R[PSC_VOLTAGE_IN] = 1,
> > +     .m[PSC_VOLTAGE_OUT] = 32,
> > +     .b[PSC_VOLTAGE_OUT] = 0,
> > +     .R[PSC_VOLTAGE_OUT] = 1,
> > +     .m[PSC_CURRENT_OUT] = 1024,
> > +     .b[PSC_CURRENT_OUT] = 0,
> > +     /*
> > +      * The rsense value used in MBR formula in LTC4286 datasheet
> should be ohm unit.
> > +      * However, the rsense value that user input is micro ohm.
> > +      * Thus, the MBR setting which involves rsense should be shifted by
> 6 digits.
> > +      */
> > +     .R[PSC_CURRENT_OUT] = 3 - 6,
> > +     .m[PSC_POWER] = 1,
> > +     .b[PSC_POWER] = 0,
> > +     /*
> > +      * The rsense value used in MBR formula in LTC4286 datasheet
> should be ohm unit.
> > +      * However, the rsense value that user input is micro ohm.
> > +      * Thus, the MBR setting which involves rsense should be shifted by
> 6 digits.
> > +      */
> > +     .R[PSC_POWER] = 4 - 6,
> > +     .m[PSC_TEMPERATURE] = 1,
> > +     .b[PSC_TEMPERATURE] = 273,
> > +     .R[PSC_TEMPERATURE] = 0,
> > +     .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT |
> PMBUS_HAVE_IOUT |
> > +                PMBUS_HAVE_PIN | PMBUS_HAVE_TEMP |
> PMBUS_HAVE_STATUS_VOUT |
> > +                PMBUS_HAVE_STATUS_IOUT |
> PMBUS_HAVE_STATUS_TEMP, };
> > +
> > +static const struct i2c_device_id ltc4286_id[] = {
> > +     { "ltc4286", 0 },
> > +     { "ltc4287", 1 },
> > +     {}
> > +};
> > +MODULE_DEVICE_TABLE(i2c, ltc4286_id);
> > +
> > +static int ltc4286_probe(struct i2c_client *client) {
> > +     int ret;
> > +     const struct i2c_device_id *mid;
> > +     u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
> > +     struct pmbus_driver_info *info;
> > +     u32 rsense;
> > +
> > +     ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID,
> block_buffer);
> > +     if (ret < 0) {
> > +             return dev_err_probe(&client->dev, ret,
> > +                                  "Failed to read manufacturer
> id\n");
> > +     }
> > +
> > +     /*
> > +      * Refer to ltc4286 datasheet page 20
> > +      * the manufacturer id is LTC
> > +      */
> > +     if (ret != LTC4286_MFR_ID_SIZE ||
> > +         strncmp(block_buffer, "LTC", LTC4286_MFR_ID_SIZE)) {
> > +             return dev_err_probe(&client->dev, ret,
> > +                                  "Manufacturer id mismatch\n");
> > +     }
> > +
> > +     ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL,
> block_buffer);
> > +     if (ret < 0) {
> > +             return dev_err_probe(&client->dev, ret,
> > +                                  "Failed to read manufacturer
> model\n");
> > +     }
> > +
> > +     for (mid = ltc4286_id; mid->name[0]; mid++) {
> > +             if (!strncasecmp(mid->name, block_buffer,
> strlen(mid->name)))
> > +                     break;
> > +     }
> > +     if (!mid->name[0])
> > +             return dev_err_probe(&client->dev, -ENODEV,
> > +                                  "Unsupported device\n");
> > +
> > +     if (of_property_read_u32(client->dev.of_node,
> > +                              "shunt-resistor-micro-ohms",
> &rsense))
> > +             rsense = 300; /* 0.3 mOhm if not set via DT */
> > +
> > +     if (rsense == 0)
> > +             return -EINVAL;
> > +
> > +     /* Check for the latter MBR value won't overflow */
> > +     if (rsense > (INT_MAX / 1024))
> > +             return -EINVAL;
> > +
> > +     info = devm_kmemdup(&client->dev, &ltc4286_info, sizeof(*info),
> > +                         GFP_KERNEL);
> > +     if (!info)
> > +             return -ENOMEM;
> > +
> > +     /* Check  MFR1 CONFIG register bit 1 VRANGE_SELECT before driver
> loading */
> > +     ret = i2c_smbus_read_word_data(client, LTC4286_MFR_CONFIG1);
> > +     if (ret < 0)
> > +             return dev_err_probe(
> > +                     &client->dev, ret,
> > +                     "Failed to read manufacturer configuration
> > + one\n");
> > +
> > +     if (device_property_read_bool(&client->dev,
> "adi,vrange-low-enable")) {
> > +             /* The voltage range is 102.4 volts now */
> > +             if (ret == VRANGE_102P4) {
> 
> This has to check VRANGE_SELECT_BIT, not the entire register.
> Other register bit values are unknown.
> 
>                 if (ret & VRANGE_SELECT_BIT)
> 
> Alternatively, something like
>         int new, orig;
>         ...
>         orig = i2c_smbus_read_word_data(client, LTC4286_MFR_CONFIG1);
>         if (orig < 0)
>                 return dev_err_probe(...);
>         new = orig;
>         if (device_property_read_bool(&client->dev,
> "adi,vrange-low-enable")) {
>                 new &= ~VRANGE_SELECT_BIT;
>                 info->m[PSC_VOLTAGE_IN] = 128;
>                 info->m[PSC_VOLTAGE_OUT] = 128;
>                 info->m[PSC_POWER] = 4 * rsense;
>         } else {
>                 new |= VRANGE_SELECT_BIT;
>                 info->m[PSC_POWER] = rsense;
>         }
>         if (new != orig) {
>                 ret = i2c_smbus_write_word_data(client,
> LTC4286_MFR_CONFIG1, new);
>                 if (ret)
>                         return dev_err_probe(...);
>         }
> 
> seems cleaner to me, but that is your call.

We will follow your suggestion to revise the code
Thanks.

> 
> Guenter





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux