[PATCH v4 01/24] i2c: designware: Fix PM calls order in dw_i2c_plat_probe()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We should not mix managed calls with non-managed. This will break
the calls order at the error path and ->remove() stages. Fix this
by wrapping PM ops to become managed one.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-designware-platdrv.c | 26 ++++++++++++++-------
 1 file changed, 17 insertions(+), 9 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 855b698e99c0..fd3cd65f9c88 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -177,14 +177,26 @@ static int txgbe_i2c_request_regs(struct dw_i2c_dev *dev)
 	return 0;
 }
 
-static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev)
+static void dw_i2c_plat_pm_cleanup(void *data)
 {
+	struct dw_i2c_dev *dev = data;
+
 	pm_runtime_disable(dev->dev);
 
 	if (dev->shared_with_punit)
 		pm_runtime_put_noidle(dev->dev);
 }
 
+static int dw_i2c_plat_pm_setup(struct dw_i2c_dev *dev)
+{
+	if (dev->shared_with_punit)
+		pm_runtime_get_noresume(dev->dev);
+
+	pm_runtime_enable(dev->dev);
+
+	return devm_add_action_or_reset(dev->dev, dw_i2c_plat_pm_cleanup, dev);
+}
+
 static int dw_i2c_plat_request_regs(struct dw_i2c_dev *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev->dev);
@@ -381,19 +393,16 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_active(&pdev->dev);
 
-	if (dev->shared_with_punit)
-		pm_runtime_get_noresume(&pdev->dev);
-
-	pm_runtime_enable(&pdev->dev);
+	ret = dw_i2c_plat_pm_setup(dev);
+	if (ret)
+		goto exit_reset;
 
 	ret = i2c_dw_probe(dev);
 	if (ret)
-		goto exit_probe;
+		goto exit_reset;
 
 	return ret;
 
-exit_probe:
-	dw_i2c_plat_pm_cleanup(dev);
 exit_reset:
 	reset_control_assert(dev->rst);
 	return ret;
@@ -411,7 +420,6 @@ static void dw_i2c_plat_remove(struct platform_device *pdev)
 
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_put_sync(&pdev->dev);
-	dw_i2c_plat_pm_cleanup(dev);
 
 	i2c_dw_remove_lock_support(dev);
 
-- 
2.43.0.rc1.1.gbec44491f096





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux