On 23/10/2023 10:11, Huangzheng Lai wrote:
> We found that when the interrupt bit of the I2C controller is cleared,
> the ack/nack bit is also cleared at the same time. After clearing the
> interrupt bit in sprd_i2c_isr(), incorrect ack/nack information will be
> obtained in sprd_i2c_isr_thread(), resulting in incorrect communication
> when nack cannot be recognized. To solve this problem, we used a global
> variable to record ack/nack information before clearing the interrupt
> bit instead of a local variable.
>
> Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver")
> Cc: <stable@xxxxxxxxxxxxxxx> # v4.14+
> Signed-off-by: Huangzheng Lai <Huangzheng.Lai@xxxxxxxxxx>
Fixes must be send independent of features.
Best regards,
Krzysztof
