[PATCH v3 12/12] i2c: add zhaoxin i2c controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add Zhaoxin I2C controller driver. It provides the access to the i2c
busses, which connects to the touchpad, eeprom, I2S, etc.

Zhaoxin I2C controller has two separate busses, so may accommodate up
to two I2C adapters. Those adapters are listed in the ACPI namespace
with the "IIC1D17" HID, and probed by a platform driver.

The driver works with IRQ mode, and supports basic I2C features. Flags
I2C_AQ_NO_ZERO_LEN and I2C_AQ_COMB_WRITE_THEN_READ are used to limit
the unsupported access.

Signed-off-by: Hans Hu <hanshu-oc@xxxxxxxxxxx>
---
 MAINTAINERS                          |   8 +
 drivers/i2c/busses/Kconfig           |  10 +
 drivers/i2c/busses/Makefile          |   2 +
 drivers/i2c/busses/i2c-zhaoxin-plt.c | 296 +++++++++++++++++++++++++++
 4 files changed, 316 insertions(+)
 create mode 100644 drivers/i2c/busses/i2c-zhaoxin-plt.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 2894f0777537..a7f75579fca1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9915,6 +9915,14 @@ L:	linux-i2c@xxxxxxxxxxxxxxx
 F:	Documentation/i2c/busses/i2c-ismt.rst
 F:	drivers/i2c/busses/i2c-ismt.c
 
+I2C/SMBUS ZHAOXIN DRIVER
+M:	Hans Hu <hanshu@xxxxxxxxxxx>
+L:	linux-i2c@xxxxxxxxxxxxxxx
+S:	Maintained
+W:	https://www.zhaoxin.com
+F:	drivers/i2c/busses/i2c-viai2c-common.c
+F:	drivers/i2c/busses/i2c-zhaoxin.c
+
 I2C/SMBUS STUB DRIVER
 M:	Jean Delvare <jdelvare@xxxxxxxx>
 L:	linux-i2c@xxxxxxxxxxxxxxx
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 6644eebedaf3..d04f3ce64952 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -335,6 +335,16 @@ config I2C_VIAPRO
 
 if ACPI
 
+	config I2C_ZHAOXIN
+	tristate "Zhaoxin I2C Interface"
+	depends on PCI || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  ZHAOXIN I2C interface
+
+	  This driver can also be built as a module. If so, the module
+	  will be called i2c-zhaoxin.
+
 comment "ACPI drivers"
 
 config I2C_SCMI
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 19262f4d30fe..4faac9dcbce0 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -29,6 +29,8 @@ obj-$(CONFIG_I2C_SIS630)	+= i2c-sis630.o
 obj-$(CONFIG_I2C_SIS96X)	+= i2c-sis96x.o
 obj-$(CONFIG_I2C_VIA)		+= i2c-via.o
 obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
+i2c-zhaoxin-objs := i2c-zhaoxin-plt.o i2c-viai2c-common.o
+obj-$(CONFIG_I2C_ZHAOXIN)	+= i2c-zhaoxin.o
 
 # Mac SMBus host controller drivers
 obj-$(CONFIG_I2C_HYDRA)		+= i2c-hydra.o
diff --git a/drivers/i2c/busses/i2c-zhaoxin-plt.c b/drivers/i2c/busses/i2c-zhaoxin-plt.c
new file mode 100644
index 000000000000..08d673eaa406
--- /dev/null
+++ b/drivers/i2c/busses/i2c-zhaoxin-plt.c
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright(c) 2021 Shanghai Zhaoxin Semiconductor Corporation.
+ *                    All rights reserved.
+ */
+
+#include <linux/pci.h>
+#include "i2c-viai2c-common.h"
+
+#define ZX_I2C_NAME             "Zhaoxin-I2C"
+
+/*
+ * registers
+ */
+/* Zhaoxin specific register bit fields */
+/* REG_CR Bit fields */
+#define   ZXI2C_CR_MST_RST		BIT(7)
+#define   ZXI2C_CR_FIFO_MODE		BIT(14)
+/* REG_ISR/IMR Bit fields */
+#define   ZXI2C_IRQ_FIFONACK		BIT(4)
+#define   ZXI2C_IRQ_FIFOEND		BIT(3)
+#define   ZXI2C_IRQ_MASK		(VIAI2C_ISR_MASK_ALL \
+					| ZXI2C_IRQ_FIFOEND \
+					| ZXI2C_IRQ_FIFONACK)
+/* Zhaoxin specific registers */
+#define ZXI2C_REG_CLK		0x10
+#define   ZXI2C_CLK_50M			BIT(0)
+#define ZXI2C_REG_REV		0x11
+#define ZXI2C_REG_HCR		0x12
+#define   ZXI2C_HCR_RST_FIFO		GENMASK(1, 0)
+#define ZXI2C_REG_HTDR		0x13
+#define ZXI2C_REG_HRDR		0x14
+#define ZXI2C_REG_HTLR		0x15
+#define ZXI2C_REG_HRLR		0x16
+#define ZXI2C_REG_HWCNTR	0x18
+#define ZXI2C_REG_HRCNTR	0x19
+
+/* parameters Constants */
+#define ZXI2C_GOLD_FSTP_100K	0xF3
+#define ZXI2C_GOLD_FSTP_400K	0x38
+#define ZXI2C_GOLD_FSTP_1M	0x13
+#define ZXI2C_GOLD_FSTP_3400K	0x37
+#define ZXI2C_HS_MASTER_CODE	(0x08 << 8)
+#define ZXI2C_FIFO_SIZE		32
+
+/* Structure definition */
+#define zxi2c viai2c
+
+static int zxi2c_fifo_xfer(struct zxi2c *i2c, struct i2c_msg *msg)
+{
+	u16 xfered_len = 0;
+	u16 byte_left = msg->len;
+	u16 tcr_val = i2c->tcr;
+	void __iomem *base = i2c->base;
+	bool read = !!(msg->flags & I2C_M_RD);
+
+	while (byte_left) {
+		u16 i;
+		u8 tmp;
+		int error;
+		u16 xfer_len = min_t(u16, byte_left, ZXI2C_FIFO_SIZE);
+
+		byte_left -= xfer_len;
+
+		/* reset fifo buffer */
+		tmp = ioread8(base + ZXI2C_REG_HCR);
+		iowrite8(tmp | ZXI2C_HCR_RST_FIFO, base + ZXI2C_REG_HCR);
+
+		/* set xfer len */
+		if (read) {
+			iowrite8(xfer_len - 1, base + ZXI2C_REG_HRLR);
+		} else {
+			iowrite8(xfer_len - 1, base + ZXI2C_REG_HTLR);
+			/* set write data */
+			for (i = 0; i < xfer_len; i++)
+				iowrite8(msg->buf[xfered_len + i],
+						base + ZXI2C_REG_HTDR);
+		}
+
+		/* prepare to stop transmission */
+		if (i2c->hrv && !byte_left) {
+			tmp = ioread8(i2c->base + VIAI2C_REG_CR);
+			tmp |= read ? VIAI2C_CR_RX_END : VIAI2C_CR_TX_END;
+			iowrite8(tmp, base + VIAI2C_REG_CR);
+		}
+
+		reinit_completion(&i2c->complete);
+
+		if (xfered_len) {
+			/* continue transmission */
+			tmp = ioread8(i2c->base + VIAI2C_REG_CR);
+			iowrite8(tmp |= VIAI2C_CR_CPU_RDY,
+					i2c->base + VIAI2C_REG_CR);
+		} else {
+			/* start transmission */
+			tcr_val |= (read ? VIAI2C_TCR_MASTER_READ : 0);
+			writew(tcr_val | msg->addr, base + VIAI2C_REG_TCR);
+		}
+
+		error = viai2c_wait_status(i2c, ZXI2C_IRQ_FIFOEND);
+		if (error)
+			return error;
+
+		/* get the received data */
+		if (read)
+			for (i = 0; i < xfer_len; i++)
+				msg->buf[xfered_len + i] =
+					ioread8(base + ZXI2C_REG_HRDR);
+
+		xfered_len += xfer_len;
+	}
+
+	return 1;
+}
+
+static int zxi2c_master_xfer(struct i2c_adapter *adap,
+			struct i2c_msg *msgs, int num)
+{
+	u8 tmp;
+	int ret;
+	struct zxi2c *i2c = (struct zxi2c *)i2c_get_adapdata(adap);
+
+	ret = viai2c_wait_bus_ready(i2c);
+	if (ret)
+		return ret;
+
+	tmp = ioread8(i2c->base + VIAI2C_REG_CR);
+	tmp &= ~(VIAI2C_CR_RX_END | VIAI2C_CR_TX_END);
+
+	if (num == 1 && msgs->len >= 2 &&
+	   (i2c->hrv || msgs->len <= ZXI2C_FIFO_SIZE)) {
+		/* enable fifo mode */
+		iowrite16(ZXI2C_CR_FIFO_MODE | tmp, i2c->base + VIAI2C_REG_CR);
+		/* clear irq status */
+		iowrite8(ZXI2C_IRQ_MASK, i2c->base + VIAI2C_REG_ISR);
+		/* enable fifo irq */
+		iowrite8(VIAI2C_ISR_NACK_ADDR | ZXI2C_IRQ_FIFOEND,
+				i2c->base + VIAI2C_REG_IMR);
+
+		ret = zxi2c_fifo_xfer(i2c, msgs);
+	} else {
+		/* enable byte mode */
+		iowrite16(tmp, i2c->base + VIAI2C_REG_CR);
+		/* clear irq status */
+		iowrite8(ZXI2C_IRQ_MASK, i2c->base + VIAI2C_REG_ISR);
+		/* enable byte irq */
+		iowrite8(VIAI2C_ISR_NACK_ADDR | VIAI2C_IMR_BYTE,
+				i2c->base + VIAI2C_REG_IMR);
+
+		ret = viai2c_xfer(adap, msgs, num);
+		if (ret < 0)
+			iowrite16(tmp | VIAI2C_CR_END_MASK,
+					i2c->base + VIAI2C_REG_CR);
+		/* make sure the state machine is stopped */
+		usleep_range(1, 2);
+	}
+	/* dis interrupt */
+	iowrite8(0, i2c->base + VIAI2C_REG_IMR);
+
+	return ret;
+}
+
+static u32 zxi2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm zxi2c_algorithm = {
+	.master_xfer	= zxi2c_master_xfer,
+	.functionality	= zxi2c_func,
+};
+
+static const struct i2c_adapter_quirks zxi2c_quirks = {
+	.flags = I2C_AQ_NO_ZERO_LEN | I2C_AQ_COMB_WRITE_THEN_READ,
+};
+
+static const u32 zxi2c_speed_params_table[][3] = {
+	/* speed, ZXI2C_TCR, ZXI2C_FSTP */
+	{ I2C_MAX_STANDARD_MODE_FREQ, 0, ZXI2C_GOLD_FSTP_100K },
+	{ I2C_MAX_FAST_MODE_FREQ, VIAI2C_TCR_FAST, ZXI2C_GOLD_FSTP_400K },
+	{ I2C_MAX_FAST_MODE_PLUS_FREQ, VIAI2C_TCR_FAST, ZXI2C_GOLD_FSTP_1M },
+	{ I2C_MAX_HIGH_SPEED_MODE_FREQ, VIAI2C_TCR_HS_MODE | VIAI2C_TCR_FAST,
+	  ZXI2C_GOLD_FSTP_3400K },
+};
+
+static void zxi2c_set_bus_speed(struct zxi2c *i2c)
+{
+	iowrite16(i2c->tr, i2c->base + VIAI2C_REG_TR);
+	iowrite8(ZXI2C_CLK_50M, i2c->base + ZXI2C_REG_CLK);
+	iowrite16(i2c->mcr, i2c->base + VIAI2C_REG_MCR);
+}
+
+static void zxi2c_get_bus_speed(struct zxi2c *i2c)
+{
+	u8 i, count;
+	u8 fstp;
+	const u32 *params;
+	u32 acpi_speed = i2c_acpi_find_bus_speed(i2c->dev);
+
+	count = ARRAY_SIZE(zxi2c_speed_params_table);
+	for (i = 0; i < count; i++)
+		if (acpi_speed == zxi2c_speed_params_table[i][0])
+			break;
+	/* if not found, use 400k as default */
+	i = i < count ? i : 1;
+
+	params = zxi2c_speed_params_table[i];
+	fstp = ioread8(i2c->base + VIAI2C_REG_TR);
+	if (abs(fstp - params[2]) > 0x10) {
+		/*
+		 * if BIOS setting value far from golden value,
+		 * use golden value and warn user
+		 */
+		dev_warn(i2c->dev, "speed:%d, fstp:0x%x, golden:0x%x\n",
+				params[0], fstp, params[2]);
+		i2c->tr = params[2] | 0xff00;
+	} else {
+		i2c->tr = fstp | 0xff00;
+	}
+
+	i2c->tcr = params[1];
+	i2c->mcr = ioread16(i2c->base + VIAI2C_REG_MCR);
+	/* for Hs-mode, use 0000 1000 as master code */
+	if (params[0] == I2C_MAX_HIGH_SPEED_MODE_FREQ)
+		i2c->mcr |= ZXI2C_HS_MASTER_CODE;
+
+	dev_info(i2c->dev, "speed mode is %s\n",
+			i2c_freq_mode_string(params[0]));
+}
+
+static int zxi2c_probe(struct platform_device *pdev)
+{
+	int error;
+	struct zxi2c *i2c;
+	struct pci_dev *pci;
+	struct i2c_adapter *adap;
+
+	error = viai2c_init(pdev, &i2c);
+	if (error)
+		return error;
+
+	zxi2c_get_bus_speed(i2c);
+	zxi2c_set_bus_speed(i2c);
+
+	i2c->platform = VIAI2C_PLAT_ZHAOXIN;
+	i2c->hrv = ioread8(i2c->base + ZXI2C_REG_REV);
+
+	adap = &i2c->adapter;
+	adap->owner = THIS_MODULE;
+	adap->algo = &zxi2c_algorithm;
+	adap->retries = 2;
+	adap->quirks = &zxi2c_quirks;
+	adap->dev.parent = &pdev->dev;
+	ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
+	pci = to_pci_dev(pdev->dev.parent);
+	snprintf(adap->name, sizeof(adap->name), "%s-%s-%s",
+		ZX_I2C_NAME, dev_name(&pci->dev), dev_name(i2c->dev));
+	i2c_set_adapdata(adap, i2c);
+
+	return devm_i2c_add_adapter(&pdev->dev, adap);
+}
+
+static int zxi2c_resume(struct device *dev)
+{
+	struct zxi2c *i2c = dev_get_drvdata(dev);
+
+	iowrite8(ZXI2C_CR_MST_RST, i2c->base + VIAI2C_REG_CR);
+	zxi2c_set_bus_speed(i2c);
+
+	return 0;
+}
+
+static const struct dev_pm_ops zxi2c_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(NULL, zxi2c_resume)
+};
+
+static const struct acpi_device_id zxi2c_acpi_match[] = {
+	{"IIC1D17", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, zxi2c_acpi_match);
+
+static struct platform_driver zxi2c_driver = {
+	.probe = zxi2c_probe,
+	.driver = {
+		.name = ZX_I2C_NAME,
+		.acpi_match_table = ACPI_PTR(zxi2c_acpi_match),
+		.pm = &zxi2c_pm,
+	},
+};
+
+module_platform_driver(zxi2c_driver);
+
+MODULE_AUTHOR("HansHu@xxxxxxxxxxx");
+MODULE_DESCRIPTION("Shanghai Zhaoxin IIC driver");
+MODULE_LICENSE("GPL");
-- 
2.34.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux