On 10/23/2023 4:11 PM, Huangzheng Lai wrote:
Recently, some bugs have been discovered during use, patch3 and
patch5-6 are bug fixes. Also, this patchset add new features:
patch1 allows I2C to use more frequencies for communication,
patch2 allows I2C to use 'reset framework' for reset, and patch4 allows
I2C controller to dynamically switch frequencies during use.
I suggest separating bugfix patches from feature patches to ensure that
bugfix patches are reviewed and merged as soon as possible.
change in V2
-Using 'I2C' instead of 'IIC' in the patch set.
-Using imperative form in patch subject.
-Use 'switch case' instead of 'else if' in PATCH 1/7.
-Modify if (i2c_dev->rst != NULL) to if (i2c_dev->rst) in PATCH 2/7.
-Modify some dev_err() to dev_warn() or dev_dbg().
-Clear i2c_dev->ack_flag in sprd_i2c_clear_ack() in PATCH 3/7.
-Modify the indentation format of the code in PATCH 4/7.
-Move sprd_i2c_enable() above its caller in PATCH 5/7.
-Remove 'Set I2C_RX_ACK when clear irq' commit.
-Add Fixes tags.
Huangzheng Lai (7):
i2c: sprd: Add configurations that support 1Mhz and 3.4Mhz frequencies
i2c: sprd: Add I2C driver to use 'reset framework' function
i2c: sprd: Use global variables to record I2C ack/nack status instead
of local variables
i2c: sprd: Add I2C controller driver to support dynamic switching of
400K/1M/3.4M frequency
i2c: sprd: Configure the enable bit of the I2C controller before each
transmission initiation
i2c: sprd: Increase the waiting time for I2C transmission to avoid
system crash issues
i2c: sprd: Add I2C_NACK_EN and I2C_TRANS_EN control bits
drivers/i2c/busses/i2c-sprd.c | 166 ++++++++++++++++++++++------------
1 file changed, 106 insertions(+), 60 deletions(-)
