On 16/10/2023 04:35, Chris Packham wrote: > Add reset-gpios and reset-delay-us properties to the marvell,mv64xxx-i2c > binding. These can be used to describe hardware where a common reset > GPIO is connected to all downstream devices on and I2C bus. This reset > will be released before the downstream devices on the bus are probed. > > Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> > --- > > Notes: > Changes in v2: > - Update commit message > - Add reset-delay-us property > > .../devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml > index 461d1c9ee3f7..7223797b0572 100644 > --- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml > +++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml > @@ -70,6 +70,12 @@ properties: > resets: > maxItems: 1 > > + reset-gpios: > + maxItems: 1 > + > + reset-delay-us: > + description: Delay in us to wait after reset gpio de-assertion. Add: default: XXXX Best regards, Krzysztof
