The ST M24C32-D behaves as a regular M24C32, except for the -D variant
which uses up another I2C address for Additional Write lockable page.
This page is 32 Bytes long and can contain additional data. Add entry
for it, so users can describe that page in DT. Note that users still
have to describe the main M24C32 area separately as that is on separate
I2C address from this page.
Signed-off-by: Marek Vasut <marex@xxxxxxx>
---
Cc: Arnd Bergmann <arnd@xxxxxxxx>
Cc: Bartosz Golaszewski <brgl@xxxxxxxx>
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-i2c@xxxxxxxxxxxxxxx
---
drivers/misc/eeprom/at24.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 7dfd7fdb423e6..616e63efc9864 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -191,6 +191,8 @@ AT24_CHIP_DATA(at24_data_24c16, 16384 / 8, 0);
AT24_CHIP_DATA(at24_data_24cs16, 16,
AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
AT24_CHIP_DATA(at24_data_24c32, 32768 / 8, AT24_FLAG_ADDR16);
+/* M24C32-D Additional Write lockable page (M24C32-D order codes) */
+AT24_CHIP_DATA(at24_data_24c32d_wlp, 32, AT24_FLAG_ADDR16);
AT24_CHIP_DATA(at24_data_24cs32, 16,
AT24_FLAG_ADDR16 | AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
AT24_CHIP_DATA(at24_data_24c64, 65536 / 8, AT24_FLAG_ADDR16);
@@ -222,6 +224,7 @@ static const struct i2c_device_id at24_ids[] = {
{ "24c16", (kernel_ulong_t)&at24_data_24c16 },
{ "24cs16", (kernel_ulong_t)&at24_data_24cs16 },
{ "24c32", (kernel_ulong_t)&at24_data_24c32 },
+ { "24c32d-wl", (kernel_ulong_t)&at24_data_24c32d_wlp },
{ "24cs32", (kernel_ulong_t)&at24_data_24cs32 },
{ "24c64", (kernel_ulong_t)&at24_data_24c64 },
{ "24cs64", (kernel_ulong_t)&at24_data_24cs64 },
@@ -252,6 +255,7 @@ static const struct of_device_id at24_of_match[] = {
{ .compatible = "atmel,24c16", .data = &at24_data_24c16 },
{ .compatible = "atmel,24cs16", .data = &at24_data_24cs16 },
{ .compatible = "atmel,24c32", .data = &at24_data_24c32 },
+ { .compatible = "atmel,24c32d-wl", .data = &at24_data_24c32d_wlp },
{ .compatible = "atmel,24cs32", .data = &at24_data_24cs32 },
{ .compatible = "atmel,24c64", .data = &at24_data_24c64 },
{ .compatible = "atmel,24cs64", .data = &at24_data_24cs64 },
--
2.40.1
