Add driver for Intel La Jolla Cove Adapter (LJCA) device. This IO-expander adds additional functions to the host system with host USB interface, such as GPIO, I2C and SPI. This patch set adds four drivers to support this device: a USB device driver, a GPIO chip driver, a I2C controller driver and a SPI controller driver. --- v20: - add __counted_by attributes for all of [] arrays - use proper kernel doc for ljca_adapter structure - re-structure ljca_recv function to make it more clear - remove all of scoped_guard - check return value of usb_autopm_get_interface() - re-structure ljca_enumerate_clients() to handle error correctly - add comment for 'uid = "0";' in ljca_match_device_ids() - change the parameters' type of ljca_send() to u8 v17 - v19: - rebase patch set on top of Linus' master branch (57d88e8a5974644039fbc47806bac7bb12025636) - change valid_pins type to __le32 and access valid_pins with get_unaligned_le32 - remove COMPILE_TEST for USB_LJCA Kconfig v16: - drop all void * and use real types in the exported apis and internal ljca_send() - remove #ifdef in usb-ljca.c file - add documentation in ljca.h for the public structures - add error message in ljca_handle_cmd_ack() if error happens and remove blank line - use the functionality in cleanup.h for spinlock to make function much simpler - change the type of ex_buf in struct ljca_adapter to u8 * v14 - v15: - enhance disconnect() of usb-ljca driver - change memchr to strchr in ljca_match_device_ids() of usb-ljca driver - fix build error: implicit declaration of function 'acpi_dev_clear_dependencies' v13: - make ljca-usb more robust with the help of Hans de Goede - call acpi_dev_clear_dependencies() to mark _DEP ACPI dependencies on the I2C controller as satisfied - avoid err printing because of calling usb_kill_urb when attempts to resubmit the rx urb v10 - v12: - switch dev_err to dev_dbg for i2c-ljca driver - remove message length check because of defined quirk structure - remove I2C_FUNC_SMBUS_EMUL support - remove ljca_i2c_format_slave_addr - remove memset before write write w_packet for i2c driver - make ljca_i2c_stop void and print err message in case failure - use dev_err_probe in ljca_i2c_probe function v9: - overhaul usb-ljca driver to make it more structured and easy understand - fix memory leak issue for usb-ljca driver - add spinlock to protect tx_buf and ex_buf - change exported APIs for usb-ljca driver - unify prefix for structures and functions for i2c-ljca driver - unify prefix for structures and functions for spi-ljca driver - unify prefix for structures and functions for gpio-ljca driver - update gpio-ljca, i2c-ljca and spi-ljca drivers according to usb-ljca's changes Wentong Wu (4): usb: Add support for Intel LJCA device i2c: Add support for Intel LJCA USB I2C driver spi: Add support for Intel LJCA USB SPI driver gpio: update Intel LJCA USB GPIO driver drivers/gpio/Kconfig | 4 +- drivers/gpio/gpio-ljca.c | 246 +++++++----- drivers/i2c/busses/Kconfig | 11 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-ljca.c | 343 ++++++++++++++++ drivers/spi/Kconfig | 11 + drivers/spi/Makefile | 1 + drivers/spi/spi-ljca.c | 297 ++++++++++++++ drivers/usb/misc/Kconfig | 13 + drivers/usb/misc/Makefile | 1 + drivers/usb/misc/usb-ljca.c | 902 ++++++++++++++++++++++++++++++++++++++++++ include/linux/usb/ljca.h | 145 +++++++ 12 files changed, 1870 insertions(+), 105 deletions(-) create mode 100644 drivers/i2c/busses/i2c-ljca.c create mode 100644 drivers/spi/spi-ljca.c create mode 100644 drivers/usb/misc/usb-ljca.c create mode 100644 include/linux/usb/ljca.h -- 2.7.4
