On 04/10/2023 13:08, Andrew Jeffery wrote:
On Fri, 2023-09-29 at 09:39 +0200, Wolfram Sang wrote:
On Wed, Sep 27, 2023 at 11:42:43PM +0800, Jian Zhang wrote:
When the `CONFIG_I2C_SLAVE` option is enabled and the device operates
as a slave, a situation arises where the master sends a START signal
without the accompanying STOP signal. This action results in a
persistent I2C bus timeout. The core issue stems from the fact that
the i2c controller remains in a slave read state without a timeout
mechanism. As a consequence, the bus perpetually experiences timeouts.
In this case, the i2c bus will be reset, but the slave_state reset is
missing.
Fixes: fee465150b45 ("i2c: aspeed: Reset the i2c controller when timeout occurs")
Signed-off-by: Jian Zhang <zhangjian.3032@xxxxxxxxxxxxx>
Somebody wants to add tags here? I think it should go to my pull request
this week.
I've tested this patch applied on top of fee465150b45 on an AST2600 and
the the system behaviour doesn't seem worse. However, I can still lock
the bus up and trigger a hung task panic by surprise-unplugging things.
I'll poke around to see if I can get to the bottom of that.
Resetting the slave state makes sense, so with the above observation
aside:
Tested-by: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
That said I do wonder whether we should update the slave state in the
same place we're updating the hardware state. It would cover off the
gap identified by Jian if it were to ever occur anywhere else.
Something like:
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-
aspeed.c
index 5a416b39b818..28e2a5fc4528 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -749,6 +749,8 @@ static void __aspeed_i2c_reg_slave(struct
aspeed_i2c_bus *bus, u16 slave_addr)
func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+ bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
}
static int aspeed_i2c_reg_slave(struct i2c_client *client)
@@ -765,7 +767,6 @@ static int aspeed_i2c_reg_slave(struct i2c_client
*client)
__aspeed_i2c_reg_slave(bus, client->addr);
bus->slave = client;
- bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
spin_unlock_irqrestore(&bus->lock, flags);
return 0;
We tested both Jian's patch and Andrew's patch on our MCTP-i2c bus
(ast2600 based BMC) and see both patches work well.
We currently use upstream i2c-aspeed.c driver with the commit [1]
backported. Without that commit, we frequently experienced the bus hang
(due to bus arbitration) and it is unable to recover.
But, by reverting that commit and with Jian or Andrew's patch, we see
the bus could be able to recover so we think both changes are good.
[1]
https://github.com/AspeedTech-BMC/linux/commit/11a94e5918aa0f87c828d63fd254dd60ab2505e5
Anyway, I would prefer Andrew's way because the bus->slave_state must
always be reset to ASPEED_I2C_SLAVE_INACTIVE everytime
__aspeed_i2c_reg_slave() is called.
Thanks
- Quan
