[PATCH v2 2/2] arm64: dts: qcom: sc7280: Add Camera Control Interface busses

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the CCI busses found on sc7280 and their pinctrl states.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 136 +++++++++++++++++++++++++++++++++++
 1 file changed, 136 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 66f1eb83cca7..65550de2e4ff 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3793,6 +3793,86 @@ videocc: clock-controller@aaf0000 {
 			#power-domain-cells = <1>;
 		};
 
+		cci0: cci@ac4a000 {
+			compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4a000 0 0x1000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac4b000 {
+			compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4b000 0 0x1000>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci2_default &cci3_default>;
+			pinctrl-1 = <&cci2_sleep &cci3_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sc7280-camcc";
 			reg = <0 0x0ad00000 0 0x10000>;
@@ -4298,6 +4378,62 @@ tlmm: pinctrl@f100000 {
 			gpio-ranges = <&tlmm 0 0 175>;
 			wakeup-parent = <&pdc>;
 
+			cci0_default: cci0-default-state {
+				pins = "gpio69", "gpio70";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				pins = "gpio69", "gpio70";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio71", "gpio72";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				pins = "gpio71", "gpio72";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_default: cci2-default-state {
+				pins = "gpio73", "gpio74";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				pins = "gpio73", "gpio74";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci3_default: cci3-default-state {
+				pins = "gpio75", "gpio76";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci3_sleep: cci3-sleep-state {
+				pins = "gpio75", "gpio76";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			dp_hot_plug_det: dp-hot-plug-det-state {
 				pins = "gpio47";
 				function = "dp_hot";

-- 
2.42.0




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux