Re: [PATCH 3/3] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable CCI busses

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Subject: Re: [PATCH 3/3] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable CCI busses
From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Date: Fri, 29 Sep 2023 15:36:06 +0200
Cc: ~postmarketos/upstreaming@xxxxxxxxxxx, phone-devel@xxxxxxxxxxxxxxx, linux-i2c@xxxxxxxxxxxxxxx, linux-arm-msm@xxxxxxxxxxxxxxx, devicetree@xxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx
In-reply-to: <20230929-sc7280-cci-v1-3-16c7d386f062@fairphone.com>
References: <20230929-sc7280-cci-v1-0-16c7d386f062@fairphone.com> <20230929-sc7280-cci-v1-3-16c7d386f062@fairphone.com>
User-agent: Mozilla/5.0 (X11; Linux aarch64; rv:102.0) Gecko/20100101 Thunderbird/102.15.1



On 9/29/23 10:01, Luca Weiss wrote:

Enable the CCI busses where sensors are connected to.

Not covered here is the regulator used for pull-up on the I2C busses.
This would be pm8008_l6 (L6P).

Does it make sense to enable non-functional hw then? Or is it on by default?

Konrad

Follow-Ups:
- Re: [PATCH 3/3] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable CCI busses
  - From: Luca Weiss

References:
- [PATCH 0/3] Add CCI support for SC7280
  - From: Luca Weiss
- [PATCH 3/3] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable CCI busses
  - From: Luca Weiss

Prev by Date: Re: [PATCH 2/3] arm64: dts: qcom: sc7280: Add Camera Control Interface busses
Next by Date: Re: [PATCH 3/3] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable CCI busses
Previous by thread: [PATCH 3/3] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable CCI busses
Next by thread: Re: [PATCH 3/3] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable CCI busses
Index(es):
- Date
- Thread

[Index of Archives] [Linux GPIO] [Linux SPI] [Linux Hardward Monitoring] [LM Sensors] [Linux USB Devel] [Linux Media] [Video for Linux] [Linux Audio Users] [Yosemite News] [Linux Kernel] [Linux SCSI]

Powered by Linux