BTW...
On Thu, Aug 03, 2023 at 05:10:02PM +0000, Parker Newman wrote:
>
you have a blank line here.
> This patch fixes the Tegra DMA config option processing in the
> i2c-tegra driver.
>
> Tegra processors prior to Tegra186 used APB DMA for I2C requiring
> CONFIG_TEGRA20_APB_DMA=y while Tegra186 and later use GPC DMA requiring
> CONFIG_TEGRA186_GPC_DMA=y.
>
> The check for if the processor uses APB DMA is inverted and so the wrong
> DMA config options are checked.
>
> This means if CONFIG_TEGRA20_APB_DMA=y but CONFIG_TEGRA186_GPC_DMA=n
> with a Tegra186 or later processor the driver will incorrectly think DMA is
> enabled and attempt to request DMA channels that will never be availible,
> leaving the driver in a perpetual EPROBE_DEFER state.
>
> Signed-off-by: Parker Newman <pnewman@xxxxxxxxxxxxxxx>
As this is a fix you also need to add
Fixes: 48cb6356fae1 ("i2c: tegra: Add GPCDMA support")
Cc: Akhil R <akhilrajeev@xxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # v6.1+
Cc'eing Akhil as well for his opinion on this.
Andi
